• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.185-188
• /
• 2000

Disinfection and molecular weight changes by electron beam irradiation has been examined. Before radiation, the viscosity of oven-dried HA decreased about 30% but the viscosity of vacuum-dried HA did not decrease. The number of viable cell depends on the relative humidity(RH). The cell number decreased about 30% in RH 0% and about 10% in RH 100%. After radiation, the decrease in the molecular weight of the hyaluronic acid was larger in the RH=0% than in the RH=100% and was larger in the vacuum-dried HA than in the oven-dried HA. The extent of disinfection were similar for all form.

• Preventive Nutrition and Food Science
• /
• 제12권2호
• /
• pp.89-94
• /
• 2007

Nutrients and hormone levels of dried pig placenta were studied. Placentas were freeze-dried (FD), oven-dried at 60 (OD-60), and 90$^{\circ}C$ (OD-90) and then crushed by a blender into small pieces. FD and OD-60 pig placenta had a higher moisture content than did OD-90, with no difference between FD and OD-60. There were no large differences in compositions of crude protein, crude fat, and crude ash of dried placenta among the treatments and the contents of K, Fe, and ${\alpha}$-tocopherol were highest in FD (p<0.05). Glutamine and glycine were the most abundant amino acids in all dried placenta and tyrosine was highly retained in FD placenta, compared with OD (p<0.05). Estradiol was the major sex hormone, followed by progesterone and testosterone in all dried placentas. Antibiotics including amoxicillin, sulfamethazine, tylosin, and chlorotetracyclin were not detected from the pig placentas tested. These results demonstrate that placenta is a good biomaterial with high nutritional quality, and that freeze drying is superior to oven drying for processing pig placenta.

• Journal of Nutrition and Health
• /
• 제8권4호
• /
• pp.33-37
• /
• 1975

This investigation was designed to determine the influence of drying methods on the free amino acids and free sugars in red pepper and to study the browning mechanism of brown-colored red pepper. Three different drying methods were employed: 1) Sun-drying at $25{\sim}28^{\circ}C$ for 15 days, 2) Drying in oven at $60^{\circ}C$ for 49 hours, and 3) Drying in oven at $90^{\circ}C$ for 8 hours. Dried and ground peels were used for the analysis of free amino acids and free sugars. The results were as follows; 1. Sixteen kinds of amino acids i.e. asparagine, methionine, and cystine etc. were identified. Total amino acid content of the sun-dried sample was not different from that of the fresh sample, but the samples dried at $60^{\circ}C$ and $90^{\circ}C$ in the oven were decreased to 24.9% and 67.4% respectively. Of amino acids identified, methionine, lysine and aspartic acid were decreased in all treatments. Especially, methionine ana aspartic acid were decreased rapidly to 71.8% and 73.3% , respectively. 2. Three kinds of free sugars i.e. glucose, fructose and sucrose were identified. The total content of free sugars was significantly decreased in each treatment. Among the reducing sugars, glucose was rapidly decreased; 65.9% for the glucose of sample dried at $90^{\circ}C$ in the oven. 3. At the higher drying temperature, the darker red color was found. Brown-color appeared at $90^{\circ}C-drying$ showed appreciable losses in carotenoid content, but the major color seems to be due to the large increase in browning compounds. 4. It was assumed that increased browning compounds of red pepper were due to the Maillard reaction which is a nonenzymatic browning process.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권11호
• /
• pp.1615-1622
• /
• 2014

An accurate assessment of moisture content in feed ingredients is important because moisture influences the nutritional evaluation of feedstuffs. The objective of this study was to evaluate various methods for moisture content determination. In Exp. 1, the weight loss on drying (LOD) of corn, soybean meal (SBM), distillers dried grains with solubles (DDGS), whey permeate, whey powder, spray-dried porcine plasma (SDPP), fish meal, and a mixed diet of these 7 ingredients were measured by oven drying at $135^{\circ}C$ for 2 h. Additionally, the samples were dried at $105^{\circ}C$ for 3, 6, 9, 12, or 15 h. The LOD contents of the DDGS, whey permeate, and whey powder measured by drying at $135^{\circ}C$ for 2 h were greater than the values measured by drying at $105^{\circ}C$ for 3 h (p<0.05). All samples except SDPP (p = 0.70) dried at $105^{\circ}C$ for 6, 9, 12, or 15 h caused more LOD compared with the samples dried for at $105^{\circ}C$ for 3 h (p<0.05). The LOD contents of the individual ingredients were additive when dried at $105^{\circ}C$ regardless of drying time. In Exp. 2, moisture contents of corn, SBM, wheat, whey permeate, whey powder, lactose, and 2 sources of DDGS (DDGS1 and DDGS2) were measured by the Karl Fischer method, oven drying at $135^{\circ}C$ for 2 h, and oven drying at $125^{\circ}C$, $115^{\circ}C$, $105^{\circ}C$, or $95^{\circ}C$ for increasing drying time from 1 to 24 h. Drying samples at $135^{\circ}C$ for 2 h resulted in higher moisture content in whey permeate (7.5% vs 3.0%), whey powder (7.7% vs 3.8%), DDGS1 (11.4% vs 7.5%), and DDGS2 (13.1% vs 8.8%) compared with the Karl Fischer method (p<0.05). Whey permeate and whey powder were considerably darkened as the drying time increased. In conclusion, drying samples at $135^{\circ}C$ for 2 h is not appropriate for determining the moisture content in whey permeate, whey powder, or DDGS as well as the mixed diet containing these ingredients. The oven-drying method at $105^{\circ}C$ for 5 to 6 h appears to be appropriate for whey permeate and whey powder, and at $105^{\circ}C$ for 2 to 3 h for DDGS.

• 지질공학
• /
• 제32권3호
• /
• pp.401-410
• /
• 2022

본연구에서는 순수한 흙입자의 무게를 측정하는 유효한 방법을 찾기 위하여 예천지역의 화강풍화토를 대상으로 노건조 시험을 수행하였다. 노건조 후 데시케이터를 사용하는 한국산업표준(KS F)에 규정된 방법과 데시케이터를 사용하지 않는 경우에 대하여 비교하였다. 노건조 후 45분간 공기 중에 노출된 흙시료는 공기 중에서 수분을 흡수하여 무게가 점진적으로 증가하였다. 공기 중에 노출 후 30초에 측정된 결과에서 데시케이터를 사용한 경우는 데시케이터를 사용하지 않은 경우에 비하여 흙의 입경에 따라 0.103~0.735%의 무게가 증가되었다. 노건조 후 데시케이터를 사용하면 순수한 흙무게를 과대평가하는 결과가 나타난다. 그러므로, 데시케이터의 사용 없이 노건조 후 시료의 무게를 곧바로 측정하면 흙무게의 측정오차를 감소시킬 수 있다.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.66-71
• /
• 2004

When waterlogged wood dries up, it shrinks largely. And it is hard to recover original shape. Therefore it happens to lose the value of wood remains frequently. This paper studied how far dried waterlogged wood can recover original shape. Shape recovering course and extent are thoroughly investigated after waterlogged wood of Pinus densiflora, Quercus serrata and Styrax japonica oven-dries and instills varieties of test solution. At 1- step, oven-dried samples infiltrated by chlorous acid sodium or sodium hydroxide solution. At 2- step, wood tissues of samples were swelled by the fast decompression after infiltrating $CO_2-supercritical$ fluid at high pressure. The study investigated the possibility of shape recovering in waterlogged wood. Shape recovering rate is different with solution and wood species. Sample of sodium hydroxide solution doesn't swell anymore when using $CO_2-supercritical$ fluid. In general, the sample of sodium hydroxide solution has higher Shape recovering rate than $CO_2-supercritical$ fluid solution treated by chlorous acid sodium.

• 한국지반환경공학회 논문집
• /
• 제24권3호
• /
• pp.5-14
• /
• 2023

흙의 건조단위중량은 노건조된 흙의 무게를 측정하여 구할 수 있다. 한국산업표준(KS F)의 규정에 의해 110±5℃로 노건조된 흙은 공기 중에 노출 시 무게가 지속적으로 증가한다. 그러나, 노건조된 흙의 무게 측정 시간에 대한 규정이 없어 정확한 건조무게를 측정하는데 어려움이 있다. 본 연구에서는 무게 측정 시 나타나는 무게 특이점의 분석을 통해 건조무게를 쉽게 결정할 수 있는 방법을 제시하였다. 무게 특이점은 측정된 무게 중 가장 작은 값을 나타내며, 시료의 공기 중 수분 흡수의 영향이 최소화된 무게이다. 실험 과정에서 통계적 분석법을 이용하여 용기를 선택하였고, 광학현미경을 사용하여 시료의 사진을 제시하였다. 또한, 비접촉식 적외선 온도계를 사용하여 무게 특이점의 발생 온도를 측정하였다. 주문진 모래와 내성천 모래, 예천 화강풍화토, 제주도 모래, 사브카 모래, 울릉도 모래 등 6종류의 흙에 대하여 무게 특이점을 분석한 결과, 노건조된 각 시료의 무게 특이점은 무게 측정 후 8~27초 사이에서, 온도는 103.4~108.13℃의 범위에서 나타났다. 특이점의 무게 감소율은 흙 시료에 따라 0.0066~0.0085%로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제14권1호
• /
• pp.45-54
• /
• 1986

A study was conducted to determine the physical properties related to drying characteristics, the seasonal air drying curves and the kiln drying schedule for taun lumber imported and utilized. This kiln drying schedule was found by oven drying and developed by pilot testing of green lumber and partially air dried lumber. The results of this study were as follows; 1. Average green specific gravity and standard deviation of heartwood lumber were 0.60${\pm}$0.03 and those of sapwood lumber were 0.64${\pm}$0.02. 2. Radial shrinkage from green to air dry and from green to oven dry were 3.05 percent and 5.96 percent respectively, and tangential shrinkage from green to air dry and to oven dry were 5.49 percent and 8.74 percent respectively. 3. Drying time for 25mm thick green lumber (50 percent moisture content) air dried to 30 percent moisture content were 14 days in springtime. 6 days in summertime, and 12 days in autumntime, whereas for 50mm thick lumber in 36 days in springtime, 18 days in summertime, 38 days in autumntime. 4. Kiln drying schedules developed by oven drying were T8-B3 for 25mm thick lumber and T5-B2 for 50mm thick lumber. 5. Kiln drying curves of green 25mm and 50mm thick lumber were similar to those of partially air dried lumber from the level of 30 percent average moisture content. Green 25mm thick lumber (55.7 percent moisture content) was dried to 9.3 percent moisture content in 101.5 hours and green 50mm thick lumber (65.6 percent moisture content) was dried to 11.5 percent moisture content in 526 hours. 6. End checking for green 25mm thick lumber occured in 49.6 percent moisture content and reached maximum amount in 27.6 percent moisture content and closed in 15.8 percent moisture content. 7. End checking for green 50mm thick lumber and partially air dried lumber developed and reached maximum amount earlier then for 25mm thick lumber. 8. Final moisture content of surface layer for 50mm thick lumber was one half of that of core, and moisture content equalized in the lumber after nine days of room conditioning. 9. Casehardening for 50mm thick lumber was slight and was conditioned after nine days of room stroage. 10. Drying defects, such as end checking and surface checking, were not observed and the quality of dry lumber was first.

• Animal Bioscience
• /
• 제35권7호
• /
• pp.1048-1058
• /
• 2022

Objective: The present study was to investigate the extraction conditions of dietary fiber from dried cassava pulp (DCP) and cassava distiller's dried grains (CDG) under different NaOH concentrations, and the Fourier transform infrared (FTIR) was used to determine the dietary fiber components. Methods: The dried samples (DCP and CDG) were treated with various concentrations of NaOH at levels of 2%, 4%, 6%, and 8% using a completely randomized design with 4 replications of each. After extraction, the residual DCP and CDG dietary fiber were dried in a hot air oven at 55℃ to 60℃. Finally, the oven dried extracted dietary fiber was powdered to a particle size of 1 mm. Both extracted dietary fibers were analyzed for their chemical composition and determined by FTIR. Results: The DCP and CDG treated with NaOH linearly or quadratically or cubically (p<0.05) increased the total dietary fiber (TDF) and insoluble fiber (IDF). The optimal conditions for extracting dietary fiber from DCP and CDG were under treatment with 6% and 4% NaOH, respectively, as these conditions yielded the highest TDF and IDF contents. These results were associated with the FTIR spectra integration for a semi-quantitative analysis, which obtained the highest cellulose content in dietary fiber extracted from DCP and CDG with 6% and 4% NaOH solution, respectively. The principal component analysis illustrated clear separation of spectral distribution in cassava pulp extracted dietary fiber (DFCP) and cassava distiller's dried grains extracted dietary fiber (DFCDG) when treated with 6% and 4% NaOH, respectively. Conclusion: The optimal conditions for the extraction of dietary fiber from DCP and CDG were treatment with 6% and 4% NaOH solution, respectively. In addition, FTIR spectroscopy proved itself to be a powerful tool for fiber identification.

• 한국식품영양학회지
• /
• 제22권2호
• /
• pp.192-198
• /
• 2009

Cheongkukjang is a traditional fermented soybean food in Korea that is used in the manufacture of functional foods. This study was conducted to assess vitamin contents and sensory qualities of powdered Cheongkukjang dried by oven drying, far-infrared drying and freeze drying. Vitamins $B_1$, $B_2$, $B_6$, E, niacin and pantothenic acid were detected using all drying methods. However, vitamin D was not detected in the oven drying samples, and was most prevalent($82.47{\mu}g$/100 g) in the far-infrared drying samples. The sensory characteristics included color, off flavor, salty taste, bitter taste, sweet taste, roasted taste and after-taste. Oven drying and freeze drying samples exhibited highest and lowest color scores(5.62 and 2.0, respectively). Oven drying samples also exhibited the highest roasted taste score(4.76), although not significantly different from far-infrared drying samples(4.0, p<0.05), while the score of freeze drying samples(2.38) was significantly different from the other methods(p<0.05). It is concluded that freeze drying is most suitable.