• Strategy21
• /
• s.33
• /
• pp.65-112
• /
• 2014

Recent trends show that the PRC has stepped aside its "army-centered approach" and placed greater emphasis on its Navy and Air Force for a wider range of operations, thereby reducing its ground force and harnessing its economic power and military technology into naval development. A quantitative growth of the PLA Navy itself is no surprise as this is not a recent phenomenon. Now is the time to pay closer attention to the level of PRC naval force's performance and the extent of its warfighting capacity in the maritime domain. It is also worth asking what China can do with its widening naval power foundation. In short, it is time to delve into several possible scenarios I which the PRC poses a real threat. With this in mind, in Section Two the paper seeks to observe the construction progress of PRC's naval power and its future prospects up to the year 2020, and categorize time frame according to its major force improvement trends. By analyzing qualitative improvements made over time, such as the scale of investment and the number of ships compared to increase in displacement (tonnage), this paper attempts to identify salient features in the construction of naval power. Chapter Three sets out performance evaluation on each type of PRC naval ships as well as capabilities of the Navy, Air Force, the Second Artillery (i.e., strategic missile forces) and satellites that could support maritime warfare. Finall, the concluding chapter estimates the PRC's maritime warfighting capability as anticipated in respective conflict scenarios, and considers its impact on the Korean Peninsula and proposes the directions ROK should steer in response. First of all, since the 1980s the PRC navy has undergone transitions as the focus of its military strategic outlook shifted from ground warfare to maritime warfare, and within 30 years of its effort to construct naval power while greatly reducing the size of its ground forces, the PRC has succeeded in building its naval power next to the U.S.'s in the world in terms of number, with acquisition of an aircraft carrier, Chinese-version of the Aegis, submarines and so on. The PRC also enjoys great potentials to qualitatively develop its forces such as indigenous aircraft carriers, next-generation strategic submarines, next-generation destroyers and so forth, which is possible because the PRC has accumulated its independent production capabilities in the process of its 30-year-long efforts. Secondly, one could argue that ROK still has its chances of coping with the PRC in naval power since, despite its continuous efforts, many estimate that the PRC naval force is roughly ten or more years behind that of superpowers such as the U.S., on areas including radar detection capability, EW capability, C4I and data-link systems, doctrines on force employment as well as tactics, and such gap cannot be easily overcome. The most probable scenarios involving the PRC in sea areas surrounding the Korean Peninsula are: first, upon the outbreak of war in the peninsula, the PRC may pursue military intervention through sea, thereby undermining efforts of the ROK-U.S. combined operations; second, ROK-PRC or PRC-Japan conflicts over maritime jurisdiction or ownership over the Senkaku/Diaoyu islands could inflict damage to ROK territorial sovereignty or economic gains. The PRC would likely attempt to resolve the conflict employing blitzkrieg tactics before U.S. forces arrive on the scene, while at the same time delaying and denying access of the incoming U.S. forces. If this proves unattainable, the PRC could take a course of action adopting "long-term attrition warfare," thus weakening its enemy's sustainability. All in all, thiss paper makes three proposals on how the ROK should respond. First, modern warfare as well as the emergent future warfare demonstrates that the center stage of battle is no longer the domestic territory, but rather further away into the sea and space. In this respect, the ROKN should take advantage of the distinct feature of battle space on the peninsula, which is surrounded by the seas, and obtain capabilities to intercept more than 50 percent of the enemy's ballistic missiles, including those of North Korea. In tandem with this capacity, employment of a large scale of UAV/F Carrier for Kill Chain operations should enhance effectiveness. This is because conditions are more favorable to defend from sea, on matters concerning accuracy rates against enemy targets, minimized threat of friendly damage, and cost effectiveness. Second, to maintain readiness for a North Korean crisis where timely deployment of US forces is not possible, the ROKN ought to obtain capabilities to hold the enemy attack at bay while deterring PRC naval intervention. It is also argued that ROKN should strengthen its power so as to protect national interests in the seas surrounding the peninsula without support from the USN, should ROK-PRC or ROK-Japan conflict arise concerning maritime jurisprudence. Third, the ROK should fortify infrastructures for independent construction of naval power and expand its R&D efforts, and for this purpose, the ROK should make the most of the advantages stemming from the ROK-U.S. alliance inducing active support from the United States. The rationale behind this argument is that while it is strategically effective to rely on alliance or jump on the bandwagon, the ultimate goal is always to acquire an independent response capability as much as possible.

• Korean Security Journal
• /
• no.36
• /
• pp.177-200
• /
• 2013

As we enter a high industrial society that widens the gap between the rich and poor, demand for the security services has grown explosively. With the growth in quantitative expansion of security services, people have also placed increased requirements on more sophisticated and diversified security services. Consequently, market outlook for private security services industry is positive. However, Korea's private security services companies are experiencing difficulties in finding a direction to capture this new market opportunity due to their small sizes and lack of management-strategic thinking skills. Therefore, we intend to offer a direction of development for our private security services industry using a management-strategy theory and the Analytic Hierarchy Process(AHP), a structured decision-making method. A resource-based theory is one of the important management strategy theories. It explains that a company's overall performance is primarily determined by its competitive resources. Using this theory, we could analyze a company's unique resources and core competencies and set a strategic direction for the company accordingly. The usefulness and validity of this theory has been demonstrated as it has often been subject to empirical verification since 1990s. Based on this theory, we outlined a set of basic procedures to establish a management strategy for the private security services companies. We also used the AHP method to identify competitive resources, core competencies, and strategies from private security services companies in contrast with public companies. The AHP method is a technique that can be used in the decision making process by quantifying experts' knowledge and unstructured problems. This is a verified method that has been used in the management decision making in the corporate environment as well as for the various academic studies. In order to perform this method, we gathered data from 11 experts from academic, industrial, and research sectors and drew distinctive resources, competencies, and strategic direction for private security services companies vis-a-vis public organizations. Through this process, we came to the conclusion that private security services companies generally have intangible resources as their distinctive resources compared with public organization. Among those intangible resources, relational resources, customer information, and technologies were analyzed as important. In contrast, tangible resources such as equipment, funds, distribution channels are found to be relatively scarce. We also found the competencies in sales and marketing and new product development as core competencies. We chose a concentration strategy focusing on a particular market segment as a strategic direction considering these resources and competencies of private security services companies. A concentration strategy is the right fit for smaller companies as a strategy to allow them to focus all of their efforts on target customers in a single segment. Thus, private security services companies would face the important tasks such as developing a new market and appropriate products for such market segment and continuing marketing activities to manage their customers. Additionally, continuous recruitment is required to facilitate the effective use of human resources in order to strengthen their marketing competency in a long term.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.1-23
• /
• 2014

Market forecasting aims to estimate the sales volume of a product or service that is sold to consumers for a specific selling period. From the perspective of the enterprise, accurate market forecasting assists in determining the timing of new product introduction, product design, and establishing production plans and marketing strategies that enable a more efficient decision-making process. Moreover, accurate market forecasting enables governments to efficiently establish a national budget organization. This study aims to generate a market growth curve for ICT (information and communication technology) goods using past time series data; categorize products showing similar growth patterns; understand markets in the industry; and forecast the future outlook of such products. This study suggests the useful and meaningful process (or methodology) to identify the market growth pattern with quantitative growth model and data mining algorithm. The study employs the following methodology. At the first stage, past time series data are collected based on the target products or services of categorized industry. The data, such as the volume of sales and domestic consumption for a specific product or service, are collected from the relevant government ministry, the National Statistical Office, and other relevant government organizations. For collected data that may not be analyzed due to the lack of past data and the alteration of code names, data pre-processing work should be performed. At the second stage of this process, an optimal model for market forecasting should be selected. This model can be varied on the basis of the characteristics of each categorized industry. As this study is focused on the ICT industry, which has more frequent new technology appearances resulting in changes of the market structure, Logistic model, Gompertz model, and Bass model are selected. A hybrid model that combines different models can also be considered. The hybrid model considered for use in this study analyzes the size of the market potential through the Logistic and Gompertz models, and then the figures are used for the Bass model. The third stage of this process is to evaluate which model most accurately explains the data. In order to do this, the parameter should be estimated on the basis of the collected past time series data to generate the models' predictive value and calculate the root-mean squared error (RMSE). The model that shows the lowest average RMSE value for every product type is considered as the best model. At the fourth stage of this process, based on the estimated parameter value generated by the best model, a market growth pattern map is constructed with self-organizing map algorithm. A self-organizing map is learning with market pattern parameters for all products or services as input data, and the products or services are organized into an $N{\times}N$ map. The number of clusters increase from 2 to M, depending on the characteristics of the nodes on the map. The clusters are divided into zones, and the clusters with the ability to provide the most meaningful explanation are selected. Based on the final selection of clusters, the boundaries between the nodes are selected and, ultimately, the market growth pattern map is completed. The last step is to determine the final characteristics of the clusters as well as the market growth curve. The average of the market growth pattern parameters in the clusters is taken to be a representative figure. Using this figure, a growth curve is drawn for each cluster, and their characteristics are analyzed. Also, taking into consideration the product types in each cluster, their characteristics can be qualitatively generated. We expect that the process and system that this paper suggests can be used as a tool for forecasting demand in the ICT and other industries.

• Journal of the Korean Society of Costume
• /
• v.26
• /
• pp.175-206
• /
• 1995

The costume culture of China is as old and varied as her long history. As China is a multiracial nation and consists of fifty-six min-ority races including Han race, there are not only fifty-six different costumes in China but each races' costume habit is very different. Therefore, Chinese penninsula can be considered an enor-mous exhibition center of the costumes. This study undertook on the assumption that the costumes' mainstream of Korea and east-northern Asia as well as that of China could be examined by investigating the minority races' costumes in the east-and west-northern areas of China. The process of evolution of the costume of a particular people, country or area is subject not only to constraints related to geography such as climate, topography or local products but is also affected by numorous environmental influences including cultural, economic, social and even pol-itical ones in terms of the selection of material, styling, color and standard of tailoring. In other words, things like philosophy of life, religious be-lief, aesthetic outlook, moral code, class system, degree of affluence, and cultural exchange will all be reflected directly or indirectly by features of a people's or country's style costume. Of course, there are several factors affecting to the style of costume of the minority people in China. However, the only three factors-geo-graphical and environmental, production method, and religious belef-will be touched in this study. First of all, the geograghical and eenviron-mental factor would be the decisive one because the costume should be designed to overcome the constraints of climate and geographical environ-ments. Accordingly, each race has an unique style of costume. The costume of the minority races in the northern parts are loose and wide, and made of warm furs. For instance, Mongolian robe has the quality of anti-wind, anti-cold and warmness, and the width of a sleeve is narrow and long. Secondly, the costume style can be said to be limited by the production pattern, when the geo-graphical environment was affected to decide the costume style, the production pattern was together affected to it . In case of Mongolian robe, they should satisfy the dual condition as the practical function. One is the condition that they should be fitted to the climate, and the other is the condition that they should be suit-able to the nomadic life. Mongolian robes are suitable to the nomadic peoples because they are designed for not only overcoming the cold wind and weather but being used as the bedquit at night. The costumes of Hoche people was made of the skin of the fish and wild animals because of their main means of living being fishing and hunting. Accordingly, their costumes are dur-able, warm and water-proof. Finally, the style of the costume is affected by the religious belief. In other words, the pattern in fashion is closely related with the religious be-lief or ancestor worship and nature worship. Ac-cordingly, the symbols of these worship are often emerged in the decoration of the costume. The design of costume of the people in the northern areas of China is very simple. It is related with their monotheism. On the other hand, the costumes of twen쇼 minority races in the east-northern parts of China can be devided into three racial groups such as the long robes of Man people and Mongols, Tunics of the peoples in the west-northern areas, and the pants and jackets of Hoche people. The minorority races all has not only the unique costume habit but their costumes are also related with their living style and production means.

• Applied Biological Chemistry
• /
• v.15 no.3
• /
• pp.193-198
• /
• 1972

Twenty seven specimens of deteriolated storage rice were collected all over Korea. Types of deteriolation were classified according to color outlooks, and for 48 grains of each specimen the causative storage microorganisms were isolated and identified. The following results were observed; 1. 27 specimens of deteriolated rice were classified according to color outlooks into 7 types: reddish yellow 1, light reddish yellow 3, light grayish yellow 4, light red 6, dark gray 7, light gray 3, and rice weevil type 3. 2. The most common storage microorganisms group which infected deteriolated Korean rice were Aspergillus glaucus group, especially species of A. amstelodami, A. chevalieri, A. montevidensis, and A. ruber, which were frequently associated with Penicillium, Brevibactereum, and Bacillus. 3. As a specific case sometimes a specimen of deteriolated rice was infected chiefly by one deminant species of microorganism. Five cases were observed: that is, by P. islandicum, P. lanosum, B. lentus, Pseudomonas cohaerans, Brev. lipolyticum. 4. No definite relationship was observed between color outlook types and the deteriolation causing microorganisms. Only the heavily infected rice by Penicillium islandicum expressed discernible reddish yellow color indicative of the infection by this mold. 5. Mycotoxin problem could be noted in one specimen of deteriolated imported rice heavily infected by P. islandicum. Other mycotoxin producing fungi, A. flavus, A. ochraceus, A. fumigatus were also detected, but their growth frequencies were so low that it might not be serious problem.

• Clinical and Experimental Pediatrics
• /
• v.45 no.8
• /
• pp.1000-1006
• /
• 2002

Purpose : In the course of treatment, patients with hematological or oncological disorders often develop pulmonary complication. The patients who develop a severe pulmonary complication have a poor outlook. The causes of pulmonary complication are either infectious or non-infectious in origin. We have analyzed the etiology and outcome of these patients admitted to the pediatric intensive care unit of Asan Medical Center. Methods : Medical records of 95 patients on Pediatric oncology service who were admitted to pediatric intensive care unit(PICU) of Asan Medical Center from Jan 1997 to May 2000 were retrospectively reviewed. Results : The mean age of the patients was 8.5 years(2 months-18 years). The underlying malignancies of these 95 patients were as following; acute lymphoblastic leukemia(31 cases), lymphoma (11 cases), acute myeloid leukemia(nine cases), brain tumor(eight cases) and other solid tumors(25 cases). Pulmonary complications included pneumonia, acute respiratory failure, pneumothorax and pleural effusion. The most common cause of pulmonary complication was infection(88%) in etiology. The overall mortality rate was 56.8%. Pulmonary complications in these patients carried high rates of mortality regardless of whether they were immune compromised(76%) or not(69%). Even without pulmonary complications, the hematological or oncological patients admitted to PICU had high mortality rates of 43%. Conclusion : Pulmonary complications are frequent finding in the hematological or oncological patients admitted to Intensive Care Unit. The main etiology of these pulmonary complications was infection, which carried a high mortality rate regardless of their immune status at the time when they were admitted to PICU.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.1
• /
• pp.73-89
• /
• 2007

The purpose of this study was to examine the reality of inservice education provided to members of Korean Dental Hygienists Association, the state of relevant academic conferences, and the perception of the members about inservice education and academic conference. It's basically meant to help boost their participation in inservice education and their satisfaction with it, and to show some of the right directions for that. The subjects in this study were dental hygienists who attended a symposium on July 1, 2006. After a survey was conducted, the answer sheets from 489 participants were analyzed, and the findings of the study were as follows: 1. General hospitals and university hospitals made up the largest group(91.4%) that gave a monthly leave of absence, and the second largest group was dental hospitals(75.4%), followed by dental clinics(58.3%) and public dental clinics(48.0%). The most common closing time in dental clinics and dental hospitals was 5 p.m., and that was 12 p.m. in general hospitals and university hospitals. The dental hygienists in public dental clinics didn't work on Saturdays. By type of workplace, treatment was the most common duty for the dental hygienists in dental clinics and dental hospitals to perform, and those who worked at general hospitals, university hospitals and public health clinics were in charge of extensive range of jobs. 2. The rates of the dental hygienists who took that education stood at 94.9% in public dental clinics, 78.7% in dental hospitals and 75.3% in dental clinics, general hospitals and university hospitals. Regarding how many marks they got on an yearly basis, those who got eight marks or more made up the largest group(55.6%), followed by four marks or more(11.8%), six marks or more(3.4%), and two marks or more(1.5%). As for the usefulness of inservice education for their job performance, the largest number of the dental hygienists(40.8%) found it to be helpful, and the second greatest group(37.5%) considered its effectiveness to be so-so. The third largest group(8.4%) found it to be of great use, and the fourth biggest group(4.2%) considered it to be of no service. The fifth biggest group(l.3%) thought it was absolutely useless. By type of workplace, the workers in dental clinics, dental hospitals, general hospitals and university hospitals wanted the most to learn how to take care of clinical work(acquisition of up-to-date technology), and those in public health clinics hoped the most to learn about public dental health. By type of workplace, the workers in dental clinics had their sight set on self-development the most, and the dental hygienists in dental hospitals, general hospitals, university hospitals and public health clinics were most in pursuit of acquiring new knowledge. By type of workplace, the specific given conditions at work were most singled out by the dental clinic workers as the reason, and the dental hospital employees pointed out time constraints the most. The dental hygienists in general hospitals and university hospitals cited time constraints and financial burden the most, and the public health clinic personnels mentioned inaccessibility of a place for inservice education as the reason. 3. The public health clinic workers participated in academic conferences the most(90.8%), followed by the general and university hospital personnels(68.8%), dental hospital employees(65.6%) and dental clinic workers(65.5%). By type of workplace, the public health clinic workers(73.5%) expressed the most satisfaction, followed by the general and university hospital employees(67.7%), dental clinic workers(62.3%) and dental hospital personnels(54.1%). By type of workplace, the employees of dental clinics, dental hospitals, general hospitals and university hospitals preferred Saturdays, and the public health clinic workers had a liking for weekdays. As for a favored place, hotels were most preferred, followed by university hospitals, general hospitals, college lecture rooms, district halls and local public institutions. Hotels were most favored regardless of the type of workplace. 4. Regarding outlook on inservice education, they had the highest opinion on the facilities and given conditions of lecture rooms($3.41{\pm}0.83$), followed by the professionalism of lecturers($3.34{\pm}0.83$), procedures of receipt and attendance confirmation($3.34{\pm}0.83$) and class size($3.13{\pm}0.89$). On the contrary, they took the most dismal view of the inaccessibility of a place of inservice education($2.08{\pm}0.92$), followed by limited opportunity and limited date for that education($2.51{\pm}0.99$), extra financial burden($2.53{\pm}1.18$) and high tuition fee($2.57{\pm}0.96$).

• Journal of Korea Water Resources Association
• /
• v.40 no.12
• /
• pp.921-930
• /
• 2007

The objective of this study is to present temporal-spatial variation of water resources on climate change impacts using the IPCC SRES A2 scenario and dynamical downscaling of the results (using the MM5 model with a resolution of 27km by 27km) at 139 sub-basins in Korea. The variation of runoff shows differences in the change of rate according to the each sub-basins and analysis durations. It has increased in the sub-basins located in Han river basin and east part of it, the other basins have decreased. In seasonal analysis, runoff in autumn and winter have increased, while in spring and summer have decreased. The results of frequency analyzing classified runoff(Low flow(Q$\leq$5mm), Normal flow(5$\geq$100mm)) show that low flow increase in most of the sub-basins for 2031-2060 and 2061-2090. In the case of high flow, it have higher frequency ranging from -100% to 500% than low flow. Regardless of the variation of mean runoff, maximum discharge appeared to be increase in process of time. The regression method is used to figure out the relationship between the rate of runoff change and mean temperature, mean precipitation under A2 scenario. The mean actual evapotranspirations from the regression equations increased by 3.4$\sim$5.3% for the change of $1^{\circ}C$. Also, for the precipitation change of $\pm$10%, runoff variety range is -18.2$\sim$+12.4% in Han River, -21.6$\sim$+14.6% in Nakdong River, -17.5$\sim$+11.5% in Gum River, -18.4$\sim$+10.6% in Sumjin River, -19.9$\sim$+12.7% Youngsan River basin.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.45-50
• /
• 2002

The 'hands-on' craftsmanship of the 20th century has came and gone. Today, we are dealing with whole new, 'cerebral approach,' to concept and design with this new approach, design and function are very much dependant upon planning, sales, promotion, and the formative technique of the design industry. The innovative process of design constantly change as it reflects the needs and wants of society. It is and industry that constantly change as it reflects the needs and wants of society. It is and industry that constantly remakes and reshapes itself to suit current trend and outlook. The current idea being that consumers are looking for quality over quantity. Due to the 20th centuries dominant philosophy of functionalism, production intended to standardize the individual's purchasing choice. Aesthetic, or philosophic qualities played a second fiddle to the functional bias of a product, With production, Marketing, and research and development are integrated into the management process. This translates as good which include efficiency, quality, durability, and credibility an trademark and style. There is a definite 'post-modernist' movement and style in 21st century. Every possibility is available as the old boundaries of the 20th century are laid aside. There is a new, transformative quality to the current paradigm of design. The old "should" and "should not" of design no longerapplies. The integrated rative of design solves the usual disparity between aesthetic qualities and production. Design and profirability need not be stranger to one another. It can differentiate the image perceived of both enterprises and consumers by making use of integrated goods services. With an integrated system. both producers and designers win. While design gets full access to design in turn. All consumers make decisions based upon the evaluation of quality, service, and image ; even though it may not be a conscious decision to do so. Consumers are fully integrated human beings ; therefore producers who apply the new, integrated paradigmatic approach to concept, design, and production will reap the harvest of making a true relationship with individual buyer.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.