• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4455-4459
• /
• 2010

To evaluate the effect of jojoba oil massage in dry skin, 10 person with dry skin were selected and divided into two groups. One arm was treated with jojoba oil massage, the other arm wasn't treated. Jojoba oil Massage group were treated arm massage using jojoba oil for 10 minutes, 2 times per week for 4 weeks. The result was that jojoba oil massage group was increased in lipid and hydration. Especially, the more the number of massage times were increased, the more lipid and hydration were increased(lipid: t=-7.470, p<0.001(inner arm)/t=-4.666, p<0.01(outer arm), hydration:t=-3.966, p<0.01(inner arm)/t=-6.847, p<0.001(outer arm). Therefore, jojoa oil massage method was effective against dry skin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.581-584
• /
• 2014

Skin is the soft outer covering of vertebrates. In mammals, the skin is the largest organ of the integumentary system made up of multiple layers of ectodermal tissue, and guards the underlying muscles, bones, ligaments and internal organs. There is a difference of the physiological function and anatomical structure of the skin, as body parts, sex, age, race and nutritional status. In this study, we measured the moisturizing ability of the skin of the 20s Chinese and Korea in Korean. We found that the skin hydrating of Chinese is significantly higher than Korean and TEWL of Chinese is lower than Korean. We measured the moisturizing ability of both 20s Chinese and Korean. As result, the moisturizing ability of 20s Chinese is better than Korean.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.151-161
• /
• 2014

In this study, an experimental investigation has been made of the applicability of outer-layer vertical blades to real ship model. After first devised by Hutchins and Choi (2003), the outer-layer vertical blades demonstrated its effectiveness in reducing total drag of flat plate (Park et al., 2011) with maximum drag reduction of 9.6%. With a view to assessing the effect in the flow around a ship, the arrays of outer-layer vertical blades have been installed onto the side bottom and flat bottom of a 300k KVLCC model. A series of towing tank test has been carried out to investigate resistance (CTM) reduction efficiency and improvement of stern wake distribution with varying geometric parameters of the blades array. The installation of vertical blades led to the CTM reduction of 2.15~2.76% near the service speed. The nominal wake fraction was affected marginally by the blades array and the axial velocity distribution tended to be more uniform by the blades array.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.11a
• /
• pp.153-158
• /
• 2003

This study concerns the characteristics of helical flow in a concentric annulus with a diameter ratio of 0.52 and 0.9, whose outer cylinders are stationary and inner ones are rotating. Pressure losses and skin friction coefficients have been measured for fully developed flows of water and 0.2％ aqueous of sodium carboxymethyl cellulose(CMC), respectively, when the inner cylinder rotates at the speed of 0∼500rpm. The effect of rotation on the skin friction is significantly dependent on the flow regime. In all flow regimes, the skin friction coefficient is increased by the inner cylinder rotation. The change of skin friction coefficient corresponding to the variation of rotating speed is large for the laminar flow regime, whereas it becomes smaller as Re increases for the transitional flow regime and, then, it gradually approach to zero for the turbulent flow regime.

• Steel and Composite Structures
• /
• v.22 no.5
• /
• pp.1141-1162
• /
• 2016

Concrete-filled double skin steel tube (CFDST) beam-columns are widely used in industrial plants, subways, high-rise buildings and arch bridges. The CFDST columns have the same advantages as traditional CFT members. Moreover, they have lighter weight, higher bending stiffness, better cyclic performance, and have higher fire resistance capacities than their CFT counterparts. The scope of this study is to develop finite element models that can predict accepted capacities of double skin concrete-filled tube columns under the combined effect of axial and bending actions. The analysis results were studied to determine the distribution of stresses among the different components and the effect of the concrete core on the outer and inner steel tube. The developed models are first verified against the available experimental data. Accordingly, an extensive parametric study was performed considering different key factors including load eccentricity, slenderness ratio, concrete compressive strength, and steel tube yield strength. The results of the performed parametric study are intended to supplement the experimental research and examine the accuracy of the available design formulas.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.10
• /
• pp.833-843
• /
• 2002

The present experimental and numerical investigations are performed for the characteristics of transitional flow in a concentric annulus with a diameter ratio of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure losses and skin- friction coefficients have been measured for the fully developed flow of water and glycerine-water solution (44%) with the inner cylinder rotating at speed of 0∼600 nm, respectively. The transitional flow has been examined by the measurement of pressure losses to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients. The occurrence of transition has been checked by the gradient changes of pressure losses and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, it is gradually declined for turbulent flow regime.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2008

The purpose of this study is to analyze application methods and structural characteristics of each element of environment-friendly European housing through classification of skin types. The results of the study are following. 1) The skins are classified by three types; single skin with multi layers, double skin with single layer and double skin with multi layers. 2) Most single skins with multi-layer are composed with wooden louvers, sun blinds and insulating windows. There are introduction of atrium and balcony, and variation sectional space composition according to cases. 3) There are two types of double skins; to put cavity between inner skin and outer skin and more extensional spaces such as balconies, corridors and stair halls. Solar walls and mechanical ventilators are often introduced to double skins with multi-layer. 4) The functions of the latest environment-friendly skins are vary from controllers and buffers of indoor environmental elements such as temperature, light, air and sound to equipments to perform essential functions to efficiently operate HVAC systems.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.631-636
• /
• 2000

The experimental study concerns the characteristics of a transitional flow in a concentric annulus with a diameter ration of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure drops and skin-friction coefficients have been measured for the fully developed flow of water and that of glycerine-water solution (44%) at a inner cylinder rotational speed of $0{\sim}600$ rpm, respectively. The transitional flow have been examined by the measurement of pressure drops and the visualization of flow field, to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients and to understand the flow instability mechanism. The present results show that the skin-friction coefficients have the significant relation with the Rossby numbers, only for laminar regime. The occurrence of transition has been checked by the gradient changes of pressure drops and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, is gradually declined for turbulent flow regime. Consequently, the critical (axial-flow) Reynolds number decreases as the rotational speed increases. Thus, the rotation of inner cylinder promotes the early occurrence of transition due to the excitation of taylor vortices.

• Korean Journal of Organic Agriculture
• /
• v.23 no.1
• /
• pp.91-101
• /
• 2015

'Chuhwangbae' pears (Pyrus pyrifolia Nakai) were investigated on how types of paper bag and harvesting dates influenced on skin blackening before harvest as well as fruit quality after harvest. Experiments included four different types of paper bags (NP/YP, GP/YP, NP/BP, and NP/RP) and five different harvesting dates [160, 170, 180, 190, and 200 days after full bloom (DAFB)]. NP/YP and GP/YP indicated for newspaper- and gray paper-outer bag, respectively, with yellow paper-inner bag of the both. NP/BP and NP/RP indicated for newspaper-outer bag of the both with black paper- and red paper-inner bag, respectively. The NP/YP (newspaper/yellow paper) showed high absorbance and air and water vapor permeability in the bags, while the NP/RP (newspaper/red paper) resulted in poor physical properties in the bags. Fruit enclosed with NP/YP resulted in the absence of skin blackening, but fruit with NP/RP bags had the highest skin blackening (12.7%). Occurrence of skin blackening was concentrated on the middle and calyx end-part of fruit region. NP/RP bag treatment was likely to increase fruit weight, firmness, titratable acidity, and fruit surface color. Harvest at high relative humidity in air increased skin blackening of fruit. Later fruit harvest, such as 190 and 200 DAFB, increased skin blackening, fruit weight, and sugar content while decreasing fruit firmness and titratable acidity.

• Korean Journal of Human Ecology
• /
• v.17 no.1
• /
• pp.105-114
• /
• 2008

This study aims on observing the social recognition and its aspects for men taking care of their outer appearances at current point where men are rapidly rising as the main consumer in the beauty industry while their interest for outer appearances are increasing. Therefore, we observed the overall trend and changes in social recognition for male looks by analyzing the contents of articles in fashion magazines that play the critical role of spreading the trend while suggesting and delivering the diverse trend changes to the public to correspond to the individual and concrete demands of certain class segmented into gender, age, hobby, and more. As a result, articles related to outer appearances were divided into fashion, cosmetic and skin, hair and scalp, body figure care, cosmetic surgery, and others, and among them, fashion category took up the highest ratio. Also, articles related to outer appearances increased even more according to the change in time, where articles related to fashion and hair increased while articles of other categories decreased.