• 자원환경지질
• /
• 제42권2호
• /
• pp.107-120
• /
• 2009

섬진강부근 남해 대륙붕에서 획득한 시추퇴적물에서 유기지화학적(TC, TN, TS, $CaCO_3$, TOC, C/N, $\delta^{13}C$) 그리고 열분해(HI, OI, Tmax) 분석을 통하여 유기물 성분의 공간적 변화와 유기물 기원의 시간적 변화를 조사하였다. 섬진강 하구에 인접한 코아 SJ03에서 TC, TN, TS 값은 비교적 낮고 일정한 값을 보인다. 그러나, 내대륙붕 중앙 지역에서 획득한 코아 SJ02와 SJ04에서 이들 값은 다소 증가하며 그 변화 폭도 커진다. 내대륙붕 외곽경계에서 획득한 코아 SJ01과 SJ05에서 이들 값은 가장 큰 폭의 변화를 보인다. 내대륙붕 외곽경계에서 획득한 코아 SJ01에 나타난 유기물의 수직적 특성은 이 지역이 9.0 kyr B.P경 뚜렷한 환경변화를 겪었음을 지시한다. 이 시기에 TC, TOC, TN, $CaCO_3$, $\delta^{13}C$, HI, Tmax는 급격히 증가한 반면, C/N과 OI는 감소한다. 비록 퇴적물내 유기물의 함량은 높지 않으나, 이러한 변화는 9.01 cyr B.P이전 섬진강의 영향으로 퇴적물내 육상기원의 유기물이 우세하다가 9.0 kyr B.P이후 대마 난류 유입으로 해양기원의 유기물이 우세하게 되었음을 지시한다.

• Applied Microscopy
• /
• 제32권3호
• /
• pp.213-222
• /
• 2002

피조개의 외투막은 바깥 상피층, 결합조직층 그리고 안쪽 상피층으로 구성되어 있다. 상피층은 단층으로 지지세포, 섬모세포 및 분비세포들로 구성되며, 결합조직층은 주로 교원섬유와 근섬유로 이루어져 있다. 안쪽 상피층의 지지세포들은 원주형으로 자유면은 미세융모로 덮여있다. 섬모세포들은 자유면에 섬모와 미세융모를 가지며, 이들 세포의 세포질 상부에서는 다수의 관상 미토콘드리아들이 관찰된다. 분비세포들은 주로 바깥 상피층에서 관찰되며, 분비과립의 형태학적 특징에 따라 A, B, C, D 네 종류로 구분할 수 있다. A형 분비세포들은 점액세포들로서 가장자리와 중앙부의 외투막에서 주로 관찰되며, 이들 세포의 분비과립은 전자밀도가 낮고 막을 가지지 않는다. B형 분비세포들은 발달된 다수의 조면소포체와 골지체 그리고 전자밀도가 높고 막을 가진 분비과립들을 함유한다. C형 분비세포들의 분비과립은 섬유성분의 중심부와 균질성의 주변부로 구분된다. D형 분비세포들은 주로 중앙부와 각정부 외투막의 바깥 상피층에서 관찰되며, 이들 세포의 분비과립은 균질성의 중심부와 과립상의 주변부로 구분된다. 이와 같은 결과들은 피조개 외투막의 바깥 상피층은 패각형성에 관여하며, 안쪽 상피층은 외투강 정화에 관여함을 의미한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.195-197
• /
• 1993

In this paper, a planar vibratory gyroscope is designed and fabricated in macro model. Elementary experiment and test are done for micro model. This gyroscope has a double gimbal structure with an active dimension $80{\times}120{\times}1\;mm^3$. Outer gimbal vibration is generated by electromagnetic force using ferrite E-core wounded by coil. Inner gimbal vibration is detected by inductive sensor. It is demonstrated' that mechanical and electrical symmetries are important for improvement of vibratory gyroscope.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.277-280
• /
• 2001

The proposed clock generator lowers the operating frequency in a system core though it keeps data bandwidth high because it has a multiphase clocking architecture. Moreover. it has a dual loop which is comprised of an inner analog phase generation loop and outer digital phase control loop. It has both advantages of DLL's wide operating range and DLL's low jitter The proposed design has been demonstrated in terms of the concept and Hspice simulation. All circuits were designed using a 0.25${\mu}{\textrm}{m}$ CMOS process and simulated with 2.5 V power supply.

• Applied Microscopy
• /
• 제47권2호
• /
• pp.70-74
• /
• 2017

In the case of genus Nothobranchius, Nothobranchiidae, the morphology of fertilized eggs and ultrastructures of fertilized egg envelopes have been reported in only two fishes. Therefore it is hard for sure to these morphological characteristics show genus specificity because of lower research samples. So, we studied the morphology of fertilized egg, and compared the ultrastructures of outer surface, micropyle, and section of fertilized egg envelopes under the light and electron microscopes from the other two species, Nothobranchius foerschi and Nothobranchius rachovii, Nothobranchiidae to find out whether these structures have the species specificity or not. Both fertilized eggs were spherical, demersal and adhesive, and have a large oil droplet. The adhesive whip-like structures were distributed on the outer surface of egg envelope, and a micropyle located on the animal pole. The fertilized egg envelope consisted of two distinct layers: an outer electron-dense layer with adhesive structures and an inner lamellae layer in both species. The external shapes of fertilized egg and ultrastuctures of outer surface, micropyle, and section of fertilized egg envelope have same structure including results before. Our data indicate that these morphological characteristics of fertilized egg and fertilized egg envelope show genus Nothobranchius specificity.

• 대한치과의사협회지
• /
• 제54권1호
• /
• pp.21-26
• /
• 2016

The requirements for the successful treatment of all-ceramic restorations are not so different from the ones of conventional restorations. "The provisional restoration followed by an adequate tooth reduction" and "the accurately fitting prostheses with corresponding to final impression" can be the examples of them. Nevertheless, the one which all-ceramic restorations are distinguished from conventional restorations is the additional procedure of so called "bonding". In addition to the application of resin cement between "inner surface of restoration and outer surface of abutment", bonding technology can be also applied to the treatment process of "Post and Core" in particular if the abutments are non-vital teeth. Core build-up for all-ceramic crown is conducted with fiber post and tooth colored composite by considering the properties of the restorations transmitting light. I would like to share my clinical experience about "silica based ceramic and non silica based ceramic restoration.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.40-42
• /
• 2008

This integrated magnetic (IM) transformer is proposed for a phase shifted full bridge (PSFB) converter with zero voltage switching (ZVS). In a new IM transformer, the transformer is located on the center leg of E-core and the output inductor is wound on two outer legs. The proposed circuit is analyzed electrically and magnetically. An E-core is redesigned and implemented. The proposed IM transformer is experimentally compared with the conventional one through a 1.2kW prototype converter.

• Carbon letters
• /
• 제12권4호
• /
• pp.218-222
• /
• 2011

Well-aligned multi-walled carbon nanotubes (MWCNTs) were successfully synthesized by catalytic chemical vapor deposition using a hydrogen sulfide ($H_2S$) additive onto Al/Fe thin film deposited on Si wafers. Transmission electron microscopy images indicated that the as-grown carbon products were thin MWCNTs with small outer diameters of less than 10 nm. $H_2S$ plays a key role in synthesizing thin MWCNTs with a large inside hollow core. The well-aligned thin MWCNTs showed a low turn-on voltage of about 1.1 V/${\mu}m$ at a current density of 0.1 ${\mu}A/cm^2$ and a high emission current of about 1.0 mA/$cm^2$ at a bias field of 2.3 V/${\mu}m$. We suggest a possible growth mechanism for the well-aligned thin MWCNTs with a large inside hollow core.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.324-330
• /
• 2013

The dispersion of acoustic noise during the turn-on and turn-off switching of HEV(hybrid electric vehicle) relay was experimentally analyzed to identify the reason for the dispersion of noise level. An effective method was proposed to reduce the dispersion of noise level. First, a method to wrap the side of moving core with a tape was adopted to reduce the transverse vibration. It enabled the moving core to make a consistent motion and reduce the dispersion of noise level from switching operation of relay. Second, the dispersion of noise level from vibration transmission of parts such as the outer frame and yoke caulking part of relay were tested to find out main sources. From this result, it was identified that the yoke caulking part made inconsistent transient vibration and noise dispersion.

• Nuclear Engineering and Technology
• /
• 제31권4호
• /
• pp.408-422
• /
• 1999

To reduce the fast neutron fluence which deteriorates the RPV integrity, additional shields were assumed to be installed at the outer core structures of the Kori Unit 1 reactor, and its reduction effects were examined. Full scope Monte Carlo simulation with MCNP4A code was made to estimate the fast neutron fluence at the RPV. An optimized design option was found from various choices in geometry and material for shield structure. It was expected that magnitude of fast neutron fluence would be reduced by 39% at the circumferential weld of the RPV, resulting in extension of plant lifetime by 4.6 EFPYs based on the criterion of PTS requirement It was investigated that the nuclear characteristics and thermal hydraulic factors at the internal core were only negligibly influenced by the installation of additional shield structure.