• 한국가스학회지
• /
• 제21권3호
• /
• pp.39-45
• /
• 2017

LNG 산업의 핵심시설인 LNG 저장탱크는 주로 9% 니켈강형 내조와 프리스트레스 콘크리트의 외조로 구성되어 있다. 1896년 상업운전 이후 내조의 피로와 외조의 내구성 저하로 인한 구조물 성능 열화의 위험성 증대에 선제적으로 대응할 수 있도록 수명평가 프로그램이 필요하다. 이 연구는 LNG 저장탱크의 내조에 대해 피로평가와 외조의 내구성(탄산화, 염해)을 평가할 수 있는 수명평가 프로그램을 개발하였다. 내조 탱크는 3가지의 주요 시나리오를 정의하여 구조해석과 마이너 손상법칙이 적용된 피로수명 해석이 수행된다. 외조 탱크의 탄산화 평가는 이산화탄소 함량과 침투 깊이 데이터를 이용하여 콘크리트 피복두께에 따른 탄산화 진전을 예측한다. 외조 탱크의 염해 평가는 다양한 입력조건 고려와 신뢰도 있는 결과를 도출하기 위해 공개 프로그램인 Life-365프로그램에 연계하는 방안으로 구축하였다.

• 한국정보통신학회논문지
• /
• 제15권1호
• /
• pp.169-174
• /
• 2011

짧은 바깥쪽 탄소 나노튜브를 가진 이중벽 탄소 나노튜브 공진기의 경우, 자유로운 끝은 긴 안쪽 벽의 진동에 중요한 역할을 한다. 짧은 안쪽 탄소 나노튜브를 가진 이중벽 카본 나노튜브 공진기의 경우, 안쪽은 부드러운 코어로 작동하여 기본 주파수가 이들의 길이에 의해 영향을 받는다. 본 논문에서는 서로 다른 길이를 가지고 나노튜브로 구성된 이중벽 탄소 나노튜브 공진기의 주파수 변화를 분석한다. 분석 결과, 안쪽 혹은 바깥쪽 탄소 나노튜브 길이를 제어하는 다양한 주파수 소자를 구현하는데 널리 응용될 수 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.124-133
• /
• 2017

In-vessel retention by passive external reactor vessel cooling under severe accident conditions is a viable approach for retention of radioactive core melt within the reactor vessel. In this study, a new and versatile coating technique known as "cold spray" that can readily be applied to operating and advanced reactors was developed to form a microporous coating on the outer surface of a simulated reactor lower head. Quenching experiments were performed under simulated in-vessel retention by passive external reactor vessel cooling conditions using test vessels with and without cold spray coatings. Quantitative measurements show that for all angular locations on the vessel outer surface, the local critical heat flux (CHF) values for the coated vessel were consistently higher than the corresponding CHF values for the bare vessel. However, it was also observed for both coated and uncoated surfaces that the local rate of boiling and local CHF limit vary appreciably along the outer surface of the test vessel. Nonetheless, results of this intriguing study clearly show that the use of cold spray coatings could enhance the local CHF limit for downward-facing boiling by > 88%.

• Wind and Structures
• /
• 제32권5호
• /
• pp.405-421
• /
• 2021

To gain insight into the wind-induced safety concerns associated with attached tower cranes during the construction of super-tall buildings, a 606 m level frame-core tube super-tall building is selected to investigate the wind-induced vibration response and fragility of an outer-attached tower crane at all stages of construction. The wind velocity time history samples are artificially generated and used to perform dynamic response analyses of the crane to observe the effects of wind velocity and wind direction under its working and non-working resting state. The adverse effects of the relative displacement response at different connection supports are also identified. The wind-resistant fragility curves of the crane are obtained by introducing the concept of incremental dynamic analysis. The results from the investigation indicate that a large relative displacement between the supports can substantially amplify the response of the crane at high levels. Such an effect becomes more serious when the lifting arm is perpendicular to the plane of the connection supports. The flexibility of super-tall buildings should be considered in the design of outer-attached tower cranes, especially for anchorage systems. Fragility analysis can be used to specify the maximum appropriate height of the tower crane for each performance level.

• Structural Engineering and Mechanics
• /
• 제84권3호
• /
• pp.337-344
• /
• 2022

Due to corrosion defects on the surface of the oil pipe, the sealing performance of the annular blowout preventer (BOP) decreases, and the leakage of toxic and harmful gases such as H₂S and SO₂ will threaten the safety of operators on the well. Therefore, this paper establishes the FE model for evaluating the sealing performance of BOP-oil pipe corrosion defects, which is based on the rubber large deformation theory and rubber core sealing mechanism, and designs the experiment of BOP sealing performance to verify the accuracy of the FE model. The sealing performance of BOP sealing oil pipe with corrosion defects is studied. The research results show that the sealing performance of BOP is more sensitive to the axial size of corrosion defects. With the increase of oil pipe outer diameter, the critical size of defects increases continuously. The sensitivity of radial and depth dimensions is low, When for 88.9 mm outer diameter oil pipe, the axial critical size of corrosion defect is 20 mm, the radial critical size is 16 mm and the critical depth is 2 mm. Fit the formula between the outer diameter of oil pipe and the piston increment. According to the formula, the operator can calculate the piston stroke increment required by the BOP to complete the sealing when the oil pipe is corroded.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3473-3478
• /
• 2007

A dual side cooling annular fuel having internal and external coolant channels has many advantages basically due to low fuel temperature and high DNBR margin, which can make a significant increase of core power density possible. So recently a 12x12 square annular fuel array was proposed for the fuel assembly to be reloaded without structural interference with operating reactors of OPR-1000s. Even through the inherent potential of the annular fuel on the high power density, it may be seriously eroded in the case of a severe unbalanced mass flux split to the internal and external channels in standpoint of DNB. Mass flux split is determined pressure drop characteristics between inner and outer channels. The spacer grids binding fuel array influence greatly the pressure drop in outer channels and the mass flux split. As an important factor of DNB behavior, the enthalpy differences at both channel exits were evaluated using the mass flux splits.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.242-243
• /
• 2006

In this work, we report the synthesis and characterization of azomethineester polymers that consist of banana-shaped mesogen in their backbone. Two parts of the key structure of five-ring bent-core mesogen were modified by connecting different angle of central unit (Ar), and introducing lateral substituent into the outer ring (X). The synthetic details includes (1) placing the dioxydodecamethylene unit as a flexible spacer, (2) possessing 2,3- or 2,7-naphthylene, or 1,2-phenylene connection on the central unit, and (3) introducing fluorine or chlorine substituent (X = F or Cl) into the outer phenylene unit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.171-174
• /
• 2006

In this work, we report the synthesis and characterization of azomethine-ester polymers that consist of banana-shaped mesogen in their backbone. Two parts of the key structure of five-ring bent-core mesogen were modified by connecting different angle of central unit (Ar), and introducing lateral substituent into the outer ring (X). The synthetic details includes (1) placing the dioxydodecamethylene unit as a flexible spacer, (2) possessing 2,3- or 2,7-naphthylene, or 1,2-phenylene connection on the central unit, and (3) introducing fluorine or chlorine substituent (X = F or Cl) into the outer phenylene unit.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.195.2-195.2
• /
• 2014

Nanodiamond (ND) is composed of inner diamond core and outer graphite shell. The size of ND used in this study was about 5 nm. The ND solution was dropped on silicon substrate and dried in air. Dried ND sample was purified by using annealing method in air. Then, 40 keV Fe ion was irradiated into the sample. The dose was varied from $1{\times}10^{14}$ to $1{\times}10^{16}ions/cm^2$. The post annealing was performed at 1073 K in the vacuum to recover diamond structure. The annealing at 873 K in air was performed to remove the outer graphite shell. The structure of ND was confirmed by X-ray diffraction (XRD) and Raman spectroscopy. We will present the detailed data and results in the conference.

• 천문학회보
• /
• 제36권2호
• /
• pp.104.2-104.2
• /
• 2011

We study X-ray characteristics of shocked ambient gas of the Galactic core-collapse supernova remnant Cas A. Using 1 Msec observation with Chandra X-ray Observatory, we identify thermal emissions from the shocked ambient gas along the outer boundary of the remnant. Our results show that Cas A is expanding into a circumstellar wind with a wind density n ~ 1 $cm^{-3}$ at the current outer radius of the remnant (~ 3 pc). We suggest that the progenitor star of Cas A, which exploded as a Type~IIb SN, had an initial mass ~16 Msun, and have lost ~10 Msun as a RSG wind. We discuss the implications of our results for the mass loss of massive stars and the resulting supernova type.