• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.5
• /
• pp.408-413
• /
• 2009

Odontogenic keratocyst (OKC) is a epithelial developmental cyst which were first described by Phillipsen in 1956. The frequency of OKC has been reported to vary from 3% to 11% of odontogenic cysts. The most characteristic clinical aspect of OKC is the high frequency of recurrence. The mechanism of recurrence is thought to be related to residues of cyst epithelium and an intrinsic growth potential following excision. And since the lining of the OKC is thin and friable, removal of the cyst in one piece may sometimes be difficult. Complete removal of the cyst lining without leaving behind remnants attached to the soft tissue or bone is necessary to avoid recurrence. Therapeutic approaches vary in different studies from marsupialization and enucleation, which may be combined with adjuvant therapy such as cryotherapy or Carnoy's solution, to marginal or radical resection. The recurrent rate varies from approximately 20% to 62%. And OKC in the angle-ramus region of the mandible had a higher tendency to recur, because of the difficulty in accessing and removing OKC from the ramus. By employing a sagittal splitting of the mandible a good surgical access was provided and cyst could be removed completely. We present an illustrative case of a small, lobulated OKC that involved ramus on mandible, and a review of the contemporary literature.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.13.1-13.8
• /
• 2018

Background: We evaluated change in the mandibular condyle after orthognathic surgery using cone-beam computed tomography (CBCT) in patients with facial asymmetry. Methods: Thirty patients with skeletal class III malocclusion and mandibular prognathism or facial asymmetry were classified into two groups according to the amount of menton deviation (MD) from the facial midline on anteroposterior (AP) cephalogram: group A (asymmetry, MD ≥ 4 mm; n = 15) and group B (symmetry, MD < 4 mm; n = 15). Position and angle of condylar heads on the axial, sagittal, and coronal views were measured within 1 month preoperatively (T0) and postoperatively (T1) and 6 months (T2) postoperatively. Results: On axial view, both groups showed inward rotation of condylar heads at T1, but at T2, the change was gradually removed and the condylar head returned to its original position. At T1, both groups showed no AP condylar head changes on sagittal view, although downward movement of the condylar heads occurred. Then, at T2, the condylar heads tended to return to their original position. The change in distance between the two condylar heads showed that they had moved outward in both groups, causing an increase in the width between the two heads postoperatively. Analysis of all three-dimensional changes of the condylar head positions demonstrated statistically significant changes in the three different CBCT views in group B and no statistically significant changes in group A. Conclusions: There was no significant difference between the two groups in condylar head position. Because sagittal split ramus osteotomy can be performed without significant change in symmetrical and asymmetrical cases, it can be regarded as an effective method to stabilize the condylar head position in patients with skeletal class III malocclusion and mandibular prognathism or facial asymmetry.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.361-373
• /
• 2002

The purpose of this study was to evaluate the morphological changes of olveolar bone and mandibular symphysis of lower incisor by presurgical orthodontic treatment and orthognathic surgery in skeletal class III malocclusion. The sample consisted of 30 adult class III malocclusion patients who have received bilateral sagittal split mandibular osteotomy. Lateral cephalograms were taken before treatment, after presurgical orthodontic treatment and 3 months after orthognathic surgery. Skeletal and symphyseal measurements were compared and the relationships between them were analysed. The results were as follow : 1. The labial and lingual alveolar bone height in presurgical and postsurgical group were decreased than that of pretreatment group. 2. The vertical measurements of the craniofacial skeleton showed reverse correlationship with anteroposterior width of basal alveolar bone, but IMPA showed correlatiionship (p<0.01) 3. The craniofacial skeleton and the change of symphyseal measurements(symphyseal length, symphyseal width) showed no correlationship. 4. The labial alveolar bone height showed correlationship with lingual alveolar bone height(p<0.001), and negative correlationship with lingual alveolar crestal width(p<0.01). Labial and lingual alveolar crestal width has negative correlationship (p<0.05). Mandibular symphyseal length and width has positive correlationship(p<0.01). 5. IMPA, LISA showed negative correlationship with labiolingual alveolar bone height and lingual alveolar width and positive correlationship with labial alveolar base bone width.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.470-478
• /
• 2007

The purpose of this study was to investigate the clinical, biomechanical, and histologic changes in new distraction osteogenesis(DO) technique combined with a compression stimulation in accordance to different compression-distraction force ratio. 23 adult male rabbits underwent open-osteotomy at the mandibular body area and a external distraction device was applied. In the control group of 8 rabbits, only a 8 mm of distraction was performed by conventional DO technique. In an experimental group of 15 rabbits, a distraction followed by a compression force was performed according to the ratio of compression-distraction suggested by authors. The rate of experimental group I was set up as a 2 mm compression versus 10 mm distraction and the rate of experimental group II was set up as a 3 mm compression versus 11 mm distraction. All the rabbits were sacrificed for a gross finding, biomechanical, histomorphometric and histologic findings at the time of 55 days from the operation day. The results were as follows: 1. On the gross findings, because all rabbits had a sufficient healing time, every distracted new bone had good bone quality and we could not find any difference among all three groups. 2. In the histologic findings, rapid bone maturation(wide lamellar bone formation in the cancellous and cortical bone areas) was observed in two experimental groups compared to the control group. 3. On the bone density tests, the experimental group II showed higher bone density than the other experimental group and control group(control group-$0,2906g/cm^2$, experimental group I-$0.2961g/cm^2$, experimental group II-$0.3328g/cm^2$). 4. On the biomechanical tests, the experimental group II had significantly higher bone microhardness than the other experimental group and control group(control group-252.7 MPa, experimental group I-263.5 MPa, experimental group II-426.0 MPa). 5. On the microhardness tests, when we compared the hardness ratio of distracted bone versus normal bone, we could find experimental group II had significantly higher hardness ratio than the other experimental group and control group(control group-0.47, experimental group I-0.575, experimental group II-0.80). From this study, we could deduce that the modified distraction osteogenesis method with a compression stimulation might improve the quality of bone regeneration and shorten the consolidation period in comparison with conventional distraction osteogenesis techniques.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.871-879
• /
• 2007

Purpose: The purpose of this study was to evaluate the bone regeneration of novel biodegradable amorphous calcium phosphate. Materials and Method: An 8-mm, calvarial, critical-size osteotomy defect was created in each of 20 male Sprague-Dawley rats(weight $250{\sim}300g$). The animals were divided into two groups of 10 animals each and allowed to heal for 2 weeks(10 rats). The first group was the control group and the other group was the experimental group which received the novel biodegradable calcium phosphate. Results: The healing of the calvarium in the control group was uneventful. The histologic results showed little bone formation in the control group. The experimental group which received the novel biodegradable calcium phosphate showed a normal wound healing. There were a lot of new bone formation around the biomaterial in 2 weeks. The bone formation increased in 8 weeks when compared to 2 weeks and there was a significant bone increase as well(P<0.01). The nobel biodegradable calcium phosphate showed statistical significance when compared to the control group (P<0.05). The novel biodegradable calcium phosphate in 8 weeks showed a significant increase in bone formation when compared to 2 weeks $(40.4{\pm}1.6)$(%). The biodegradable calcium phosphate which is made from mixing calcium phosphate glass(CPG), NaCO and NaOH solution, is biocompatible, osteoconductive and has a high potency of bone formation. Conclusion: We can conclude that the novel biodegradable calcium phosphate can be used as an efficient bone graft material for its biodegradability and osteoconductivity.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.255-263
• /
• 2009

Purpose: An osseous defect in the glenoid and humeral head is closely associated with recurrence of anterior shoulder instability. The purpose of this article is to describe the open surgical techniques and introduce our experiences with anterior instability with a significant osseous defect. Materials and Methods: We reviewed the articles that have focused on and/or mentioned the affect of osseous defects on anterior shoulder instability. The open surgical techniques and its related pearls are summarized in this review. Results: Accurate evaluation for the size and location of the osseous defect is critical for preventing recurrence after restoration of the anterior capsulolabral structure. The glenoid bone restoration techniques include the coracoids transfer (the Bristow procedure and the Latarjet procedure) and a structural iliac bone graft. Rotational humeral osteotomy and an osteoarticular allograft could be used for repairing a significant posterosuperior humeral defect (Hill-Sachs lesion). Shoulder arthroplasty may be tried for treating a humeral bone defect, but more study on this is needed. Conclusion: Open surgical restoration decreases the risk of recurrence anterior shoulder instability that is combined with a significant osseous defect. Arthroscopic surgery currently has limitations for treating an osseous defect, but it will become useful in proportion to the development of arthroscopic instruments and techniques in the future.

• Journal of Chest Surgery
• /
• v.34 no.6
• /
• pp.472-476
• /
• 2001

Background: Minimally invasive surgery of pectus excavatum by Dr. Nuss is a new technique that allows the repair of this deformity without any cartilage resection or sternal osteotomy We describe the early experiences with Nuss procedure. Material and Method: From December 1999 to January 2001, twenty patients with pectus excavatum underwent repair by Nuss procedure There were 14 males and 6 females whose mean age was 10.1$\pm$7.7 years, ranging from 1 to 33 years. Most patients(N=19) were below 20 years, except 33 years old female patient(N=1). Result: The severity of depression was assessed by computed topography(CT). CT index was mean 4.9$\pm$5.7(ranged from 3.3 to 8). The average operating time was 85.8$\pm$23.7 minutes. The used metal bars were ranged in length from 8 inches to 16 inches(average 11.8$\pm$14.4 inches). Early postoperative complications were pneumothorax in three patients, paralytic ileus in one, and postoperative chest pain requiring analgesics in all patients. Epidural analgesia was used in one adult patient for control of postoperative pain. In our experiences, there were no serious complications posteoperatively. Conclusion: There were good early results with the Nuss procedure that we performed for repairing of pectus excavatum. However, we believe the procedure needs to be observed for the long term results for it to be broadly accepted.

• Journal of Veterinary Clinics
• /
• v.32 no.6
• /
• pp.481-485
• /
• 2015

The present study determined the normal reference ranges for overall pelvic limb alignment of small-breed dogs. For this purpose, 60 cadaveric canine pelvic limbs from normal small-breed dogs (Maltese, Poodle, Shih Tzu, Yorkshire Terrier). A frontal full-limb radiograph of each pelvic limb was obtained, and mechanical tibiofemoral angle (mTFA), mechanical metatarsotibial angle (mMTTA), mechanical axis-femur angle (MAFA), and mechanical axis-metatarsus angle (MAMTA) were measured from each radiograph, along with mechanical deviation of the stifle (SMAD) and tarsal joints (TMAD). The 95% CI for radiographic values of all pelvic limbs were mTFA, 5.7-7.4; mMTTA, $-2.2--0.8^{\circ}$; MAFA, $3.5-4.5^{\circ}$; MAMTA, 1.0-2.0; SMAD, 2.1-2.7%; TMAD, 0.5-1.0%. There values varied among the breeds, except for mTFA. The reference ranges can be used for diagnosing pelvic limb deformities in small-breed dogs and for planning corrective osteotomies.

• Journal of Yeungnam Medical Science
• /
• v.14 no.1
• /
• pp.245-261
• /
• 1997

Slipped capital femoral epiphysis(SCFE) is a disorder in which there is a gradual or acute disruption through the capital physeal plate. The physiolysis is through a widened zone of hypertrophy, which is weakened due to altered chondrocytic maturation and endochondral ossification. The cause or causes of SCFE remain uncertain. The association of obesity and adolescent age with growth rate are predisposing factors. The possibility that most patients with subclinical hormonal abnormality were proved. The goal of treatment of slipped capital femoral epiphysis is to restore the function of the hip and delay the development of degenerative osteoarthrosis by prevention of additional displacement of the epiphysis. We report 10 patients(12hips) with SCFE who were treated by surgical means and followed along for more than one year, at Yeungnam University Hospital, from 1989 to 1996. There were six boys and four girls. The average age at operation was 11.8 years. Seven cases occurred in the left hip, one case in the right and 2 cases had bilateral involvement, five cases had a history of minor trauma on affected hip. Among hormonally studied six patients, panhypopituitarism patient was one case; decreased testosterone, two; decreased growth hormone, two; and decreased thyroid hormone, one. According to clinical stage, two cases were the acute type; five cases, acute on chronic type; and three cases, chronic type. On the radiological grades of slipping, mild slippage were nine hips; moderate, one; and severe, two. The eleven hips were treated by pin fixation in situ, and one, by cuneiform osteotomy. On the average follow-up of 2.6 years, ten hips were excellent or good functional results, two hips were failure.