• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권3호
• /
• pp.233-242
• /
• 1997

Recently the goal of orthognathic surgery has been focused on esthetic improvement of the patients. Also early corrective surgery was favorable selected by most of the oral and maxillofacial surgeons. We should consider the etiologic factor of the patient's dentofacial deformities when treatment is planned, because this is the major factor in estimating the predictability or stability of result. The more researches were carried on the etiologic factors of the dentofacical deformities, The more possibility of the early surgical correction will be increased. The authors analyzed about etiologic factors and epidemiologic studies of the forth patients who had received the orthognathic surgery. The analyzed results were as follows: 1. The predilection ration between male and female was 17:23, and 32 patients (80%) of 40 patients were aged twenties. 2. 26patients(65%) complained estetic problems as well as functional problems. 10 patients(25%) complained only esthetic problems, and 4 of 40 patients complained only functional problems. 3. Mandibular prognathism was found to be done most frequently(25, 39%). Facial asymmetry (13, 20%) and angle hypertrophy were found to be next in sequence. 4. Sagittal split ramus ostetomy was done most frequently(27, 35%). Lefort I osteotomy(13, 17%), angle reduction (12,16%), and genioplasty(11, 15%) were done also. 5. The number of the cases due to nonspecific etiologic factor was 22(55%), that of cases due to inhertied tendency was 12(30%), that of cases due to congenital anomaly was 3(7.5%), and that of cases due to trauma was 3(7.5%). 6. The number of patients who got only maxilliary surgery was 2(5%), that of patients who got only mandibular surgery was 23(57.5%), and that of patients who got simultaneous two jaw surgery was 15(37.5%).

• 대한치과교정학회지
• /
• 제50권3호
• /
• pp.206-215
• /
• 2020

Osteochondroma is a common benign tumor of bones, but it is rare in the mandibular condyle. With its outgrowth it manifests clinically as deviation of the mandible limitation of mouth opening, and facial asymmetry. After the tumor is diagnosed on the basis of clinical symptoms and radiographic examination including cone-beam computed tomography (CBCT) analysis, an appropriate surgery and treatment plan should be formulated. Herein, we present the case of a 44-year-old female patient who visited our dental hospital because her chin point had been deviating to the left side slowly but progressively over the last 3 years and she had difficulty masticating. Based on CBCT, she was diagnosed with skeletal Class III malocclusion accompanied by osteochondroma of the right mandibular condyle. Maxillary occlusal cant with the right side down was observed, but it was confirmed to be an extrusion of the molars associated with dental compensation. Therefore, after intrusion of the right molars with the use of temporary anchorage devices, sagittal split ramus osteotomy was used to remove the tumor and perform orthognathic surgery simultaneously. During 6 months after the surgery, continuous bone resorption and remodeling were observed in the condyle of the affected side, which led to a change in occlusion. During the postoperative orthodontic treatment, intrusive force and buccal torque were applied to the molars on the affected side, and a proper buccal overjet was created. After 18 months, CBCT revealed that the rate of bone absorption was continuously reduced, bone corticalization appeared, and good occlusion and a satisfying facial profile were achieved.

• Imaging Science in Dentistry
• /
• 제46권2호
• /
• pp.77-85
• /
• 2016

Purpose: To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Materials and Methods: Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the MnF. The horizontal and vertical positions were examined by regression analysis. Results: Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination ($R^2$): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. Conclusion: The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권3호
• /
• pp.255-259
• /
• 2005

We observed 469 cases (male 217 cases, female 252 cases) with dento-facial deformity for 10 years from Jan 1994 to Dec 2003. The ratio of male to female was 1:1.2 and the mean age was 23.3 years (male 24.0 years, female 22.6 years) ranged from 11 to 43 years. The most dominant group was related to mandibular prognathism (80.4%). A rate of 83.8% demonstrated mandibular protrusion according to Slavicek's classification (n=160), and 85.4% were classified as skeletal Class III type according to Sugawara's classification (n=151). Surgical method were divided into 355 cases of one jaw surgery (single method), 26 cases of one jaw surgery (combined method), and 77 cases of two jaw surgery. Sagittal split osteotomy were performed on 316 cases (69.0%). The average operation time and blood loss in SSRO were $4.1{\pm}2.2$ hrs. and $138.8{\pm}222.6$ ml (n=152).

• Imaging Science in Dentistry
• /
• 제40권2호
• /
• pp.75-81
• /
• 2010

Purpose : This study is aimed to evaluate the position of mandibular foramen of mandibula prognathism patients using 3-dimensional CT images in order to reduce the chance of an anesthetic failure of the mandibular nerve and to prevent the damage to the inferior alveolar nerve during the orthognathic surgery. Materials and Methods : The control group consist of 30 patients with class I occlusion. The experimental group consist of 44 patients with class III malocclusion. Three-dimensional computed tomography was used to evaluate the position of the mandibular foramina. Results : The distance between mandibular plane and mandibular foramen, class I was 25.385 mm, class III was 23.628 mm. About the distance between occlusal plane and mandibular foramen, class I was 1.478 mm, class III was 5.144 mm. The distance between posterior border plan of mandibular ramus and mandibular foramen had not statistically significant. About the distance between sagittal plane of mandible and mandibular foramen did not also showed statistically significant. Conclusion : The result of this study could help the clinicians to apprehend more accurate anatomical locations of the foramina on the mandible with various facial skeletal types. thereby to perform more accurate block anesthesia of the mandibular nerve and osteotomy with minimal nerve damage. In addition, this study could provide fundamental data for any related researches about the location of the mandibular foramina for other purposes.

• Journal of Periodontal and Implant Science
• /
• 제40권2호
• /
• pp.76-85
• /
• 2010

Purpose: This study aimed to evaluate the effectiveness of the modified sinus floor elevation technique described hereafter as a "hybrid technique," in 11 patients with severely resorbed posterior maxillae. Methods: Eleven patients who received 22 implants in the maxillary premolar and molar areas by the hybrid technique were enrolled in this study. A slot-shaped osteotomy for access was prepared on the lateral wall along the lower border of the sinus floor. The Schneiderian membrane was fully reflected through the lateral slot. Following drilling with the membrane protected by a periosteal elevator, the bone was grafted. All implants were placed simultaneously with sinus augmentation. The cumulative success rate was calculated and clinical parameters were recorded. Radiographic measurements were performed. Results: All implants were well maintained at last follow up (cumulative success rate=100%). The mean residual bone height, augmented bone height, crown-to-implant ratio, and marginal bone loss were $4.1{\pm}1.64mm$, $8.76{\pm}1.77mm$, $1.21{\pm}0.34mm$, and $0.34{\pm}0.72mm$, respectively. Conclusions: Simultaneous implant placement with sinus augmentation by hybrid technique showed successful clinical results over a 2-year observation period and may be a reliable modality for reconstruction of a severely resorbed posterior maxilla.

• 대한두개안면성형외과학회지
• /
• 제13권1호
• /
• pp.4-10
• /
• 2012

Purpose: The objective of this retrospective study was to assess the skeletal stability after orthognathic surgery for patients with cleft lip and palate. The soft tissue changes in relation to the skeletal movement were also evaluated. Methods: Thirty one patients with cleft received orthognathic surgery by one surgeon at the Craniofacial Center, Chang Gung Memorial Hospital, Taoyuan, Taiwan. Osseous and soft tissue landmarks were localized on lateral cephalograms taken at preoperative (T0), postoperative (T1), and after completion of orthodontic treatment (T2) stages. Surgical movement (T0.T1) and relapse (T1.T2) were measured and compared. Results: Mean anteroposterior horizontal advancement of maxilla at point A was 5.5 mm, and the mean horizontal relapse was 0.5 mm (9.1%). The degree of horizontal relapse was found to be correlated to the extent of maxillary advancement. Mean vertical lengthening of maxilla at point A was 3.2 mm, and the mean vertical relapse was 0.6 mm (18.8%). All cases had maxillary clockwise rotation with a mean of 4.4 degrees. The ratio for horizontal advancement of nasal tip/anterior nasal spine was 0.54/1, and the ratio of A' point/A point was 0.68/1 and 0.69/1 for the upper vermilion/upper incisor tip. Conclusion: Satisfactory skeletal stability with an acceptable relapse rate was obtained from this study. High soft tissue to skeletal tissue ratios were obtained. Two-jaw surgery, clockwise rotation, rigid fixation, and alar cinch suture appeared to be the contributing factors for favorable results.

• 대한두개안면성형외과학회지
• /
• 제15권2호
• /
• pp.82-88
• /
• 2014

Background: The chin shape and position is important in determining the general shape of the face, and augmentation genioplasty is performed alone or in combination with other aesthetic procedures. However, augmentation genioplasty using osteotomy is an invasive and complex procedure with the potential to damage mentalis muscle and mental nerve, to affect chin growth, and prolonged recovery. Our aim was to present our experience with a modified augmentation genioplasty procedure for hypoplastic chins using a Gore-Tex implant. Methods: Two vertical slit incisions were made at the canine level to create a supra-periosteal pocket between the incisions, preserving the periosteum and mentalis muscle. Minimal sub-periosteal dissection was performed lateral to the incisions along the mandibular border. The both wings of implant were inserted under the periosteum to achieve a stable dual plane implantation. Results: In total, 47 patients underwent dual plane chin augmentation using a Gore- Tex implant between January 2008 and May 2013. The mean age at operation was 25.77 years (range, 15-55 years). There were 3 cases of infection; one patient was treated with antibiotics, the others underwent implant removal. Additionally, two patients complained of postoperative parasthesia that spontaneously improved without any additional treatment. Most patients were satisfied with the postoperative outcomes, and no chin growth problems were observed among the younger patients. Conclusion: Dual plane Gore-Tex chin augmentation is a minimally-invasive operation that is simple and safe. All implants yielded satisfactory results with no significant complications such as mental nerve injury, lower lip incompetence, or chin growth limitation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권1_2호
• /
• pp.135-142
• /
• 1992

This study was performed to define the anatomical position of the mandibular canal and the findings during the sagittal split ramus osteotomy of the mandible. The mandibles of 20 adult Korean were used. The dimension of mandibular canal from the mandibular foramen to the 1st molar was measured at 4 specific coronal-sectional location by CT scan. The results were as follows ; 1. The distance from the mandibular canal to the medial aspect of the buccal cortical plate was greatest($4.5{\pm}1.1mm$) at 2nd molar area and was not significantly greater than at any other section. 2. Buccal cortex was thickest($3.8{\pm}0.9mm$) at 2nd molar and thinnest ($2.5{\pm}0.3mm$) mandibular foramen um 3. The distance from the mandibular canal to the medial aspect of the lingual cortical plate was not significant at any sections. 4. The distance from the mandible canal to the inferior border of mandible was greatest at the mandibular foramen($20.7{\pm}3.9mm$). The canal was located more closely to the inferior border at 1st, 2nd molar area 5. The diameter of the mandibular canal was between $2.5{\pm}0.3mm$ and $2.8{\pm}0.6mm$. 6. The total mandibular thickness was greatest($21.1{\pm}2.6mm$) at 2nd molar area and narrowest($17.2{\pm}3.2mm$) at mandibular foramen area.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.376-381
• /
• 1999

A variety of materials and procedures such as sinus floor elevation, sinus-lift graft, inlay bone graft using Le Fort I osteotomy, and onlay graft have been used to create adequate bone volume in the maxillary sinus for placement of endosseous implants in the posterior atrophic maxilla. Because of the frequent lack of bone in the posterior maxilla, sinus lift procedure has become a commonly practiced treatment modality. The 138 endosseous implants of 36 patients with sinus augmentation procedures performed in Korea University Hospital from January 1991 to December 1998 were summarized and analysed. The result of this study were as follows: 1. Age ranged from 39 to 57, with a mean of 50.7. 2. The mean survival rate for 138 implants with maxillary sinus lift procedure was 80.4%. 3. There was no corelationship between the fixture length, width and the survival rate. 4. The result showed that the healing period for 8-12 months was necessary if the residual alveolar bone height was less than 5mm. 5. Autogenous iliac corticocancellous block graft showed the most favorable survival rate(95%).