• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.62-71
• /
• 2002

A free oscillation technique for obtaining the dynamic stability derivatives in yaw is applied to the pure yawing motion. The procedure of wind tunnel testing is to compute the derivatives after measuring deflecting angles of the model during the free oscillating motion. The charging compressed air is supplied for the initial excitation. The results of this experiment predicted feasible characteristics of the yawing motion, comparing with the data previously reported in the literature.

• 한국수자원학회논문집
• /
• 제51권12호
• /
• pp.1247-1260
• /
• 2018

본 연구에서는 북극진동이 우리나라에 미치는 영향을 파악하고자 북극진동지수(AOI)와 북태평양에서 발생한 태풍의 개수 및 우리나라에 영향을 준 태풍의 개수, 또한 장마기간 중 총강수량 및 장마기간 중 강수일수와의 교차상관분석을 시도하였다. AOI 자료는 월단위 형태로 존재하나 교차 상관 분석에는 1월을 중심으로 한 평균 자료와 봄, 여름, 가을, 겨울의 계절자료를 이용하였다. 장마 특성 및 태풍 특성 자료는 모두 연 단위자료이다. 본 연구에서는 AOI 및 태풍, 장마 자료의 가용성을 고려하여 1961년에서 2016년 사이의 자료를 이용하였다. 본 연구에서의 결과를 종합해 보면, 북극진동은 우리나라의 장마 특성에 약한 수준이나 유의하게 영향을 미치고 있음을 확인할 수 있었다. 그러나 그 정도는 전체기간에 대해 일정하지 않으며 시기에 따라 크게 다른 것으로 나타난다. 예를 들어, 최근 10년간 북극진동이 장마에 미친 영향은 교차상관계수로 0.8 이상이다. 그러나 그 전 30년간은 통계학적으로 유의한 영향은 없었다. 이와는 반대로 북극진동이 우리나라에 영향을 준 태풍의 개수에 미치는 영향은 전체적으로는 유의하지 않은 것으로 나타난다. 공교롭게도 부분적으로 보면 이 역시 기간에 따라 유의한 영향과 유의하지 않은 영향이 반복적으로 교차하는 모습을 보인다. 즉, 기간에 따라 북극진동의 영향은 비정상적으로 크게 변동하는 모습을 보인다. 또한, 북극진동이 우리나라의 장마와 태풍에 미치는 영향이 과거 1960년대에서 2000년대까지 서로 교차되는 특성을 보여 왔다는 점에 주목할 필요가 있다. 그러나 공교롭게도 2010년대에 들어서면서 장마에의 영향과 태풍에의 영향이 둘 다 증가하는 형태로 바뀐 것으로 보인다.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1507-1519
• /
• 2003

The two-phase flow patterns for both non-loop and loop type oscillating capillary tube heat pipes (OCHPs) were presented in this study. The detailed flow patterns were recorded by a high-speed digital camera for each experimental condition to understand exactly the operation mechanism of the OCHP. The design and operation conditions of the OCHP such as turn number, working fluid, and heat flux were varied. The experimental results showed that the representative flow pattern in the evaporating section of the OCHP was the oscillation of liquid slugs and vapor plugs based on the generation and growth of bubbles by nucleate boiling. As the oscillation of liquid slugs and vapor plugs was very speedy, the flow pattern changed from the capillary slug flow to a pseudo slug flow near the annular flow. The flow of short vapor-liquid slug-train units was the flow pattern in the adiabatic section. In the condensing section, it was the oscillation of liquid slugs and vapor plugs and the circulation of working fluid. The oscillation flow in the loop type OCHP was more active than that in the non-loop type OCHP due to the circulation of working fluid in the OCHP. When the turn number of the OCHP was increased, the oscillation and circulation of working fluid was more active as well as forming the oscillation wave of long liquid slugs and vapor plugs in the OCHP. The oscillation flow of R-142b as the working fluid was more active than that of ethanol and the high efficiency of the heat transfer performance of R -142b was achieved.

• 한국추진공학회지
• /
• 제13권2호
• /
• pp.64-76
• /
• 2009

대향류확산화염에서 화염소화와 에지화염 진동 특성에 관한 실험 및 수치해석 연구가 수행된다. 이러한 특성들은 버너 직경, 버너간 거리, 전체신장율, 그리고 속도비를 변화시키며 묘사된다. 실험과 수치해석으로부터 반경방향으로 전도열손실이 미소중력 및 중력 조건에서 화염소화와 에지화염 진동에 크게 기여한다는 것이 입증된다. 적절히 작은 버너직경을 사용한 경우에 화염 소화 모드는 4가지로 분류되며, 과다한 반경방향 열손실에 기인한다는 것이 밝혀진다. 에지화염 진동은 Strouhal 수와 Peclet 수에 의해 하나의 곡선으로 잘 특성화된다.

• 제어로봇시스템학회논문지
• /
• 제11권3호
• /
• pp.228-232
• /
• 2005

This paper presents the efforts of the studies for improvement of spin characteristics of KTX-1 #02 through rotary balance test, forced oscillation test and spin mode analysis. During the full scale development design stage, we had fullfilled a lot of spin flight test, spin mode analysis. Based on all of the efforts, KTX-1 had been developed as a successful trainer with excellent spin characteristics.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.103-108
• /
• 2002

The M-AUSMPW+ scheme that can capture shock waves exactly with monotonic characteristics is modifided from AUSMPW+ by analyzing the cause of oscillation in shock regions. Firstly shock-capturing characteristics of general FVS including the AUSM-type schemes are investigated in detail, according to the difference between a cell-interface and a sonic transition position. The cause of oscillation is the improper numerical dissipation that could not represent the real Physics. The M-AUSMPW+ could capture shocks exactly without oscillatory behaviors in considering the sonic transition position and an cell-interface position.

• 한국연소학회지
• /
• 제13권4호
• /
• pp.26-36
• /
• 2008

Experimental study is conducted to identify the existence of a shrinking flame disk and to clarify its flame characteristics through the inspection of critical mole fraction at flame extinction and edge flame oscillation at low strain rate flames. Experiments are made as varying global strain rate, velocity ratio, and burner distance. The transition from a shrinking flame disk to a flame hole is verified through gradient measurements of maximum flame temperature. The evidence of edge flame oscillation in flame disk is also provided through numerical simulation in microgravity. It is found at low strain rate flame disks in normal gravity that buoyancy effects are importantly contributing to lateral heat loss to burner rim, and is proven through critical mole fraction at flame extinction, edge flame oscillation, and measurements of flame temperature gradient along flame disk surface.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.147-155
• /
• 2009

Dynamic characteristics of the clearance flow between an axially oscillating rotational disk and a stationary disk were examined by experiments and computations based on a bulk flow model. In the case without pressure fluctuations at the inlet and outlet of the clearance, parallel and contracting flow paths had an effect to stabilize the axial oscillation of the rotating disk. The enlarged flow path had an effect to destabilize the axial oscillation due to the negative damping and stiffness for outward and inward flows, respectively. It was shown that the fluid force can be decomposed into the component caused by the inlet or outlet pressure fluctuation without the axial oscillation and that due to the axial oscillation without the inlet or outlet pressure fluctuation. A method to predict the stiffness and damping coefficients is proposed for general cases when the device is combined with an arbitrary flow system.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1393-1397
• /
• 2009

A high-speed wavelength swept laser, which is based on oscillation characteristics of a fiber Fabry-Perot tunable filter, is described. The laser is constructed by using a semiconductor optical amplifier, a fiber Fabry-Perot tunable filter, and 3.348 km fiber ring cavity. The wavelength sweeps are repeatatively generated with the repetition period of 61 kHz which is the first parallel oscillation frequency of the Fabry-Perot tunable filter for the low power consumption. Mode-locking is implemented by 3.348 km fiber ring cavity for matching the fundamental of cavity roundtrip time to the sweep period. The wavelength tuning range of the laser is 87 nm(FWHM) and the average output power is 1.284 mW.

• 한국연소학회지
• /
• 제6권2호
• /
• pp.8-14
• /
• 2001

The effects of unsteady combustion are experimentally studied using forced pulsating mixture supply. It was shown that unsteady combustion used in this experiment plays an important role in controlling self-excited combustion oscillations. It may also have desirable performances, from a practical point of view, such as high combustion load, augmented heat transfer, reduced pollutant emissions and so on. We examined the characteristics of unsteady combustion driven by forced pulsating mixture supply in a small duct-combustor with a rearward-facing step. Further, we found its influence on the onset of self-excited combustion oscillations, the possibility of suppressing self-excited combustion oscillations and the reason why the self-excited combustion oscillation was suppressed using the forced pulsating mixture supply, comparing with the steady mixture supply.