• 제목/요약/키워드: orthogonality error

검색결과 47건 처리시간 0.021초

M-채널 서브밴드 QMF 필터뱅크를 이용한 웨이브릿변환기반 적응 음향반향제거기 (An Adaptive AEC Based on the Wavelet Transform Using M-channel Subband QMF Filter Banks)

  • 안주원;권기룡;문광석;김문수
    • 한국멀티미디어학회논문지
    • /
    • 제3권4호
    • /
    • pp.347-355
    • /
    • 2000
  • 본 논문에서는 M-채널 서브밴드 QMF 필터 뱅크를 이용한 웨이브릿 변환기반 적응 음향반향제거기를 제안한다. 제안한 적응 음향반향제거기는 웨이브릿변환 필터뱅크의 적은 계산량, 서브밴드 처리 및 웨이브릿 서브밴드 필터의 직교성에 의해 정상상태 성능을 향상시키고, 실시간 처리가 가능하도록 구현한다. 각 서브밴드에서 적응필터의 계수적응을 위한 알고리듬으로는 실시간 반향제거와 하드웨어 구현시 비용감소를 위하여 계산량이 적고 구현이 간단한 LMS 적응 알고리듬을 사용한다. 제안한 적응 음향반향제거기의 성능평가를 위한 실험으로서 백색 가우시안 잡음 및 주변잡음을 포함한 실제의 음성신호를 입력신호로 반향제거 기에 인가하여 반향성능을 평가하였다. 실험 결과로서 제안한 음향반향제거기는 웨이브릿 완전복원 필터뱅크에 의해 수렴후 점근적 에러가 적고, 적은 계산량을 요구하며 안정한 수렴성능을 나타내었다.

  • PDF

DVB-시스템을 위한 적응형 채널 추정 알고리즘 (Adaptive Channel Estimation Algorithm for DVB-T)

  • 김승환;이진범;이진용;김영록
    • 한국통신학회논문지
    • /
    • 제33권6A호
    • /
    • pp.676-684
    • /
    • 2008
  • 유럽형 지상파 디지털 방송 표준인 DVB-T 시스템에서는 OFDM방식을 사용하여 신호를 전송하며, 주파수 선택적 페이딩 환경과 충격 잡음 채널에서도 향상된 성능을 제공 할 수 있다. 그러나 이동성이 가정된 시변 채널에서는 도플러 확산의 영향 때문에 한 OFDM 심볼 안에 존재하는 부반송파 사이의 직교성의 파괴, 즉 inter-carrier interference(ICI)가 발생하여 심각한 성능 열화가 발생한다. 본 논문에서는 시간 및 주파수 축에서 채널의 특성과 ICI를 분석하고, OFDM시스템에서 구현이 간단한 LS 알고리즘과 이를 이용한 잡음 및 ICI 감쇄 기법을 사용한 LS 방식을 단말기의 속도에 따라 선택하여 사용하는 적응형 채널 추정 방식을 제안한다. 단말기의 속도를 추정하는 방법을 제안하여 COST207의 TU6 채널 모델을 적용한 시뮬레이션을 통하여 그 동작을 확인하였다. 또한 속도 추정을 위한 연산을 최소화한 알고리즘을 제안하여 하드웨어의 증가를 무시할 정도로 줄였다. 제안된 적응형 채널 추정 알고리즘은 속도가 약 70 km/h 이하인 경우에 잡음 및 ICI 감쇄기법을 위한 하드웨어를 동작시키지 않음으로서 전력의 소모가 현저하게 줄어든다.

채널 부호화된 OFDM 시스템을 위한 공간 변조를 이용한 새로운 전송 기법 (A Novel Transmission Scheme with Spatial Modulation for Coded OFDM Systems)

  • 황순업;김영기;전성호;강우석;서종수
    • 한국통신학회논문지
    • /
    • 제34권7A호
    • /
    • pp.515-522
    • /
    • 2009
  • 본 논문에서는 채널 부호회된 OFDM (orthogonal frequency division multiplexing) 시스템을 위한 공간 변조를 이용한 새로운 전송 기법을 제안한다. 공간 변조라 불리는 개루프 (open-loop) 방식의 다중 안테나 기술은 업력 데이터를 안테나 인텍스(index) 신호와 데이터 신호로 나누고, 안테나 인텍스 신호에 따라 다수의 송신안테나 중 하나의 송신안테나를 선택하여 데이터 신호를 전송한다. 공간 변조는 수신기에서 송신된 신호가 어떤 안테나로부터 보내졌는지를 의미하는 안테나 인텍스를 검출해야 하는데, 이를 위해서 채널 행렬의 직교성이 보장되어야 한다. 실제 채널은 무시하지 못할 정도의 채널 상관도로 인해 직교성을 유지하지 못한다. 또한 기존 공간 변조를 위한 수신기는 경판정 방식을 취하고 있으므로, 실제 시스템에 이를 활용하기가 어렵다. 본 논문에서는 기존의 공간 변조 기법이 연판정 수신을 할 수 있도록 소프트 출력 디맵퍼 (soft-output demapper)를 유도하고, 기존 기법의 수신 성능을 개선하기 위해 새로운 구조의 전송 기법을 제안한다.

A Modified Delay and Doppler Profiler based ICI Canceling OFDM Receiver for Underwater Multi-path Doppler Channel

  • Catherine Akioya;Shiho Oshiro;Hiromasa Yamada;Tomohisa Wada
    • International Journal of Computer Science & Network Security
    • /
    • 제23권7호
    • /
    • pp.1-8
    • /
    • 2023
  • An Orthogonal Frequency Division Multiplexing (OFDM) based wireless communication system has drawn wide attention for its high transmission rate and high spectrum efficiency in not only radio but also Underwater Acoustic (UWA) applications. Because of the narrow sub-carrier spacing of OFDM, orthogonality between sub-carriers is easily affected by Doppler effect caused by the movement of transmitter or receiver. Previously, Doppler compensation signal processing algorithm for Desired propagation path was proposed. However, other Doppler shifts caused by delayed Undesired signal arriving from different directions cannot be perfectly compensated. Then Receiver Bit Error Rate (BER) is degraded by Inter-Carrier-Interference (ICI) caused in the case of Multi-path Doppler channel. To mitigate the ICI effect, a modified Delay and Doppler Profiler (mDDP), which estimates not only attenuation, relative delay and Doppler shift but also sampling clock shift of each multi-path component, is proposed. Based on the outputs of mDDP, an ICI canceling multi-tap equalizer is also proposed. Computer simulated performances of one-tap equalizer with the conventional Time domain linear interpolated Channel Transfer Function (CTF) estimator, multi-tap equalizer based on mDDP are compared. According to the simulation results, BER improvement has been observed. Especially, in the condition of 16QAM modulation, transmitting vessel speed of 6m/s, two-path multipath channel with direct path and ocean surface reflection path; more than one order of magnitude BER reduction has been observed at CNR=30dB.

MIMO 시스템에서 옥토니언 시공간 부호를 이용한 물리계층 보안에 대한 성능 분석 (Performance Evaluation of Octonion Space-Time Coded Physical Layer Security in MIMO Systems)

  • 김영주;곽범근;임슬민;진천덕
    • 방송공학회논문지
    • /
    • 제28권1호
    • /
    • pp.145-148
    • /
    • 2023
  • 송신 안테나 수가 4개인 다중 송수신 안테나 시스템에서 랜덤 위상을 갖는 오픈 루프 옥토니언 시공간 블록 부호를 적용했을 때, 불법적인 수신자가 최대 유사도 추정으로 물리계층을 해킹하는 경우의 성능을 분석한다. 합법적 수신자만 알 수 있는 무작위 위상을 불법적 수신자인 해커가 전혀 모르거나 일부를 알아냈을 때 신호 대 잡음비에 따른 비트 에러율을 분석한다. 또한 기존 논문의 옥토니언 부호가 직교성이 충분하지 않음을 보이고 완전한 직교성을 갖는 옥토니언 부호를 적용한다. 컴퓨터 시뮬레이션에서 랜덤위상은 2-PSK 성운으로 하고 있다는 것을 해커가 알고 있고 4개 송신 안테나의 랜덤 위상을 모두 해커가 추정할 경우에는 신호 대 잡음비가 100dB까지 해킹이 불가능하다. 그러나 랜덤 위상의 일부를 알게 되면 신호 대 잡음비가 20dB 이상에서 비트에러율이 10-3 정도로 유지되므로 해킹이 가능해진다.

LTE 상향 링크 시스템에서 송신기의 전력 과도 현상에 의해 발생하는 ICI를 제거하기 위한 적응적 멀티 탭 등화 기법 (Adaptive Multi-Tap Equalization for Removing ICI Caused by Transmitter Power Transient in LTE Uplink System)

  • 채혁진;조일남;김동구
    • 한국전자파학회논문지
    • /
    • 제20권8호
    • /
    • pp.701-713
    • /
    • 2009
  • 본 논문은 LTE 상향 링크 전송에서 물리적 채널간의 전력 과도 현상으로 인한 인접 부 반송파 간섭으로 반송파간의 직교성이 손상되어 수신 신호에 성능감쇄를 초래하는 문제점을 개선하기 위한 기법을 연구하였다. 전력과도 현상에 의해 발생하는 인접 부 반송파 간섭은 도플러 효과에 의해 발생하는 인접 부 반송파 간섭과는 다른 형태로 채널의 전후에서 전력 변화의 각 주기마다 발생한다. 인접 부 반송파 간섭이 발생하는 원인은 채널간의 전력 차이, 전력 과도 구간의 길이, 다중경로 채널 지연 스프레드 그리고 부 반송파의 수에 의해서 발생한다. 본 논문에서는 위에 언급한 4가지 원인으로 인해 발생하는 인접 부 반송파 간섭을 개선하기 위한, 각 채널별 다중 탭 등화기의 탭 수를 결정하는 새로운 기법을 제시하였다. 이 기법은 정규화된 간섭(normalized interference) 즉, 정규화된 부 반송파간의 간섭이 정규화된 잡음(normalized noise)보다 클 때 다중 탭 등화기의 탭 수를 결정하는 기법이다. 모의 실험 결과에서, 수신 신호의 SNR에 따라 적응적으로 탭 수가 조절되고 비트 오류율(BER)의 성능이 향상 됨을 보였고 또한 제안한 기법의 복잡도가 전통적인(classical) 방법의 복잡도 보다 88 % 줄어듦을 보였다.

A 2×2 MIMO Spatial Multiplexing 5G Signal Reception in a 500 km/h High-Speed Vehicle using an Augmented Channel Matrix Generated by a Delay and Doppler Profiler

  • Suguru Kuniyoshi;Rie Saotome;Shiho Oshiro;Tomohisa Wada
    • International Journal of Computer Science & Network Security
    • /
    • 제23권10호
    • /
    • pp.1-10
    • /
    • 2023
  • This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.