• The korean journal of orthodontics
• /
• v.42 no.4
• /
• pp.159-168
• /
• 2012

Objective: The aims of this study were to investigate mandibular deformation under clenching and to estimate its effect on the stability of orthodontic mini-implants (OMI). Methods: Three finite element models were constructed using computed tomography (CT) images of 3 adults with different mandibular plane angles (A, low; B, average; and C, high). An OMI was placed between #45 and #46 in each model. Mandibular deformation under premolar and molar clenching was simulated. Comparisons were made between peri-orthodontic mini-implant compressive strain (POMI-CSTN) under clenching and orthodontic traction forces (150 g and 200 g). Results: Three models with different mandibular plane angles demonstrated different functional deformation characteristics. The compressive strains around the OMI were distributed mesiodistally rather than occlusogingivally. In model A, the maximum POMI-CSTN under clenching was observed at the mesial aspect of #46 (1,401.75 microstrain [${\mu}E$]), and similar maximum POMI-CSTN was observed under a traction force of 150 g (1,415 ${\mu}E$). Conclusions: The maximum POMI-CSTN developed by clenching failed to exceed the normally allowed compressive cortical bone strains; however, additional orthodontic traction force to the OMI may increase POMI-CSTN to compromise OMI stability.

• The korean journal of orthodontics
• /
• v.42 no.4
• /
• pp.190-200
• /
• 2012

Objective: The displacement of the hyoid bone (HB) is a critical biomechanical component of the swallowing function. The aim of this study was to evaluate the swallowing-induced vertical and horizontal displacements of the HB in subjects with 2 different magnitudes of skeletal Class III malocclusion, by means of real-time, balanced turbo-field-echo (B-TFE) cine-magnetic resonance imaging. Methods: The study population comprised 19 patients with mild skeletal Class III malocclusion, 16 with severe skeletal Class III malocclusion, and 20 with a skeletal Class I relationship. Before the commencement of the study, all subjects underwent cephalometric analysis to identify the nature of skeletal malformations. B-TFE images were obtained for the 4 consecutive stages of deglutition as each patient swallowed 10 mL of water, and the vertical and horizontal displacements of the HB were measured at each stage. Results: At all stages of swallowing, the vertical position of the HB in the severe Class III malocclusion group was significantly lower than those in the mild Class III and Class I malocclusion groups. Similarly, the horizontal displacement of the HB was found to be significantly associated with the severity of malocclusion, i.e., the degree of Class III malocclusion, while the amount of anterior displacement of the HB decreased with an increase in the severity of the Class III deformity. Conclusions: Our findings indicate the existence of a relationship between the magnitude of Class III malocclusion and HB displacement during swallowing.

• The korean journal of orthodontics
• /
• v.46 no.6
• /
• pp.395-408
• /
• 2016

We report a case involving a young female patient with severe mandibular retrognathism accompanied by mandibular condylar deformity that was effectively treated with Le Fort I osteotomy and two genioplasty procedures. At 9 years and 9 months of age, she was diagnosed with Angle Class III malocclusion, a skeletal Class II jaw relationship, an anterior crossbite, congenital absence of some teeth, and a left-sided cleft lip and palate. Although the anterior crossbite and narrow maxillary arch were corrected by interceptive orthodontic treatment, severe mandibular hypogrowth resulted in unexpectedly severe mandibular retrognathism after growth completion. Moreover, bilateral condylar deformities were observed, and we suspected progressive condylar resorption (PCR). There was a high risk of further condylar resorption with mandibular advancement surgery; therefore, Le Fort I osteotomy with two genioplasty procedures was performed to achieve counterclockwise rotation of the mandible and avoid ingravescence of the condylar deformities. The total duration of active treatment was 42 months. The maxilla was impacted by 7.0 mm and 5.0 mm in the incisor and molar regions, respectively, while the pogonion was advanced by 18.0 mm. This significantly resolved both skeletal disharmony and malocclusion. Furthermore, the hyoid bone was advanced, the pharyngeal airway space was increased, and the morphology of the mandibular condyle was maintained. At the 30-month follow-up examination, the patient exhibited a satisfactory facial profile. The findings from our case suggest that severe mandibular retrognathism with condylar deformities can be effectively treated without surgical mandibular advancement, thus decreasing the risk of PCR.

• The korean journal of orthodontics
• /
• v.46 no.6
• /
• pp.364-371
• /
• 2016

Objective: With the introduction of third-generation light-emitting diodes (LEDs) in dental practice, it is necessary to compare their bracket-bonding effects, safety, and efficacy with those of the second-generation units. Methods: In this study, 80 extracted human premolars were randomly divided into eight groups of 10 samples each. Metal or polycrystalline ceramic brackets were bonded on the teeth using second- or third-generation LED light-curing units (LCUs), according to the manufacturers' instructions. The shear bond strengths were measured using the universal testing machine, and the adhesive remnant index (ARI) was scored by assessing the residual resin on the surfaces of debonded teeth using a scanning electron microscope. In addition, curing times were also measured. Results: The shear bond strengths in all experimental groups were higher than the acceptable clinical shear bond strengths, regardless of the curing unit used. In both LED LCU groups, all ceramic bracket groups showed significantly higher shear bond strengths than did the metal bracket groups except the plasma emulation group which showed no significant difference. When comparing units within the same bracket type, no differences in shear bond strength were observed between the second- and third-generation unit groups. Additionally, no significant differences were observed among the groups for the ARI. Conclusions: The bracket-bonding effects and ARIs of second- and third-generation LED LCUs showed few differences, and most were without statistical significance; however, the curing time was shorter for the second-generation unit.

• The korean journal of orthodontics
• /
• v.47 no.2
• /
• pp.100-107
• /
• 2017

Objective: To analyze the long-term changes in maxillary arch widths and buccal corridor ratios in orthodontic patients treated with and without premolar extractions. Methods: The study included 53 patients who were divided into the extraction (n = 28) and nonextraction (n = 25) groups. These patients had complete orthodontic records from the pretreatment (T1), posttreatment (T2), and postretention (T3) periods. Their mean retention and postretention times were 4 years 2 months and 17 years 8 months, respectively. Dental models and smiling photographs from all three periods were digitized to compare the changes in three dental arch width measurements and three buccal corridor ratios over time between the extraction and nonextraction groups. Data were analyzed using analysis of variance tests. Post-hoc multiple comparisons were made using Bonferroni correction. Results: Soft-tissue extension during smiling increased with age in both groups. The maximum dental width to smile width ratio (MDW/SW) also showed a favorable increase with treatment in both groups (p < 0.05), and remained virtually stable at T3 (p > 0.05). According to the MDW/SW ratio, the mean difference in the buccal corridor space of the two groups was $2.4{\pm}0.2%$ at T3. Additionally, no significant group ${\times}$ time interaction was found for any of the buccal corridor ratios studied. Conclusions: Premolar extractions did not negatively affect transverse maxillary arch widths and buccal corridor ratios. The long-term outcome of orthodontic treatment was comparable between the study groups.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.269-276
• /
• 1998

In maxillary canine retraction by means of sliding mechanics, we designed MAS(molar anchoring spring) to prevent anchorage loss and uncontrolled tipping of tooth movement and have applied it in clinical cases. The anchorage control of the maxillary first molar and type of tooth movement of the maxillary canine were studied in 31 subjects. The measurements were made on cephalograms, orthopantomograms and dental casts. The obtained results were as follows. 1. In case of the maxillary first molar, there was a little sagittal anchorage loss, but there was no vertical & transverse anchorage loss. 2. In case of the maxillary canine, there was distal tipping movement and also there was a little intrusion tendency.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.787-798
• /
• 1994

The purpose of this study was three-fold: i) to investigate the degree of asymmetry in Angle's Class III malocclusion patients and normal adults; ii) to determine the nature of difference existed between two groups; and iii) to investigate the correlationship between the degree of asymmetry and ANB and overbite in Angle's Class III malocclusion patients. The subjects consisted of 25 Angle's Class III malocclusion patients and 25 normal adults and the mean ages were 22.0 and 24.5 years, respectively. Their posteroanterior and lateral cephalograms were traced and analysed with three-dimensional approach. The results were as follows: 1. Asymmetry of Angle's Class III malocclusion group was significant in all regions except cranial base. Their horizontal asymmetry was seen in mandibular angle, maxillary and mandibular 1st molar, mandibular midline and menton. Vertical asymmetry was observed in maxillary 1st molar and mandibular shape and anteroposterior asymmetry in mandibular angle. 2. Nine variables indicating asymmetry were selected and each variable had similar discriminant score. 3. There was a little correlationship between An and asymmetric variable(MSR-B6) and its correlation coefficients was 0.3564. 4. There was no significant correlationship between overbite and asymmetric variables.

• The korean journal of orthodontics
• /
• v.45 no.4
• /
• pp.171-179
• /
• 2015

Objective: To compare dentoalveolar and skeletal changes produced by the pendulum appliance (PA) and the distal screw appliance (DS) in Class II patients. Methods: Forty-three patients (19 men, 24 women) with Class II malocclusion were retrospectively selected for the study. Twenty-four patients (mean age, $12.2{\pm}1.5years$) were treated with the PA, and 19 patients (mean age, $11.3{\pm}1.9years$) were treated with the DS. The mean distalization time was 7 months for the PA group and 9 months for the DS group. Lateral cephalograms were obtained at T1, before treatment, and at T2, the end of distalization. A Mann-Whitney U test was used for statistical comparisons of the two groups between T1 and T2. Results: PA and DS were equally effective in distalizing maxillary molars (4.7 mm and 4.2 mm, respectively) between T1 and T2; however, the maxillary first molars showed less distal tipping in the DS group than in the PA group ($3.2^{\circ}$ vs. $9.0^{\circ}$, respectively). Moreover, significant premolar anchorage loss (2.7 mm) and incisor proclination ($5.0^{\circ}$) were noted in the PA group, whereas premolar distal movement (1.9 mm) and no significant changes at the incisor ($0.1^{\circ}$) were observed in the DS group. No significant sagittal or vertical skeletal changes were detected between the two groups during the distalization phase. Conclusions: PA and DS seem to be equally effective in distalizing maxillary molars; however, greater distal molar tipping and premolar anchorage loss can be expected using PA.

• The korean journal of orthodontics
• /
• v.44 no.1
• /
• pp.20-27
• /
• 2014

Objective: The aims of this study were to evaluate the relationship between the detachment force and bonding resin surface are and to determine the resin bonding surface area that would provide adequate bonding strength with minimum resin volume. Methods: One hundred and sixty human premolars were randomly divided into 4 groups of 40 teeth each. The diameter of the resin surface area in each group was as follows: group 1, 1.5 mm; group 2, 2.5 mm; group 3, 3.5 mm; and group 4, 4.5 mm. Respond Dead Soft straight (length 0.0175 inch) was used to fabricate the retainers, and $Transbond^{TM}$ XT was used to fix the retainers to the tooth surfaces. A pair of teeth was embedded in acrylic blocks for each specimen. Thus, each group comprised 20 samples. Fixed retainers were bonded to the teeth, and vertical force was applied at the middle of wire. The force was measured using a universal testing machine. Results: The mean value of detachment force was the highest for group 4 ($102.38{\pm}2.92N$), followed by group 3 ($63.54{\pm}2.21N$), group 2 ($51.95{\pm}1.61N$), and group 1 ($24.14{\pm}1.38N$). Conclusions: The detachment force of lingual fixed retainers was significantly affected as the area of the resin bonding surface increased. Considering the minimum bonding strength of brackets, a resin bonding surface area with a diameter of 3.5 mm would provide adequate bonding strength.

• The korean journal of orthodontics
• /
• v.44 no.6
• /
• pp.312-319
• /
• 2014

Objective: Facial-type-associated variations in diagnostic features have several implications in orthodontics. For example, in hyperdivergent craniofacial types, growth imbalances are compensated by displacement of the condyle. When diagnosis and treatment planning involves centric relation (CR), detailed knowledge of the condylar position is desirable. The present study aimed to measure condylar displacement (CD) between CR and maximum intercuspation in three facial types of an asymptomatic orthodontic population. Methods: The study was conducted in 108 patients classified into three groups of 36 individuals each (27 women and 9 men; mean age, 20.5 years), based on the following facial patterns: hyperdivergent, hypodivergent, and intermediate. To quantify CD along the horizontal and vertical axes, the condylar position was analyzed using mounted casts on a semi-adjustable articulator and a mandibular position indicator. The Student t-test was used to compare CD between the groups. Results: Vertical displacement was found to be significantly different between the hyperdivergent and hypodivergent groups (p < 0.0002) and between the hyperdivergent and intermediate groups (p < 0.0006). The differences in horizontal displacement were not significant between the groups. In each group, vertical CD was more evident than horizontal displacement was. Conclusions: All facial types, especially the hyperdivergent type, carried a significantly high risk of CD. Therefore, the possibility of CD should be carefully evaluated and considered in the assessment of all orthodontic cases in order to accurately assess jaw relationships and avoid possible misdiagnosis.