• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.4
• /
• pp.27-36
• /
• 2017

Purpose: The characteristics of spatial allocation planning in dentistry through examining the dental hospitals in Korea and comparison between them are necessary for the development of planning of the dental healthcare system. This study has been started to provide basic informations such as zoning, allocation distribution, and space configuration for the planning of dental hospital architecture. Methods: Literature review of dental care departments and investigation on current status of dental hospital in Korea have been conducted. The spatial allocation and space configuration of eleven dental hospitals have been analyzed. Results: The result of this study can be summarized in three points. The first one is that dental hospitals in Korea are consisted with eight to eleven dental care departments and they are divided with the horizontal allocation type with three to four departments in a floor for the spatial communication or the vertical allocation type with a department in each floor for the independent space. The second one is that oral medicine and oral maxillofacial radiology are located near the main entrance, orthodontics and pedodontic dentistry in lower level, prosthodontics in upper level, and conservative dentistry and periodontics have no specific spatial consideration. The third one is that the factors to consider the allocation planning are zoning for examination & diagnosis, basic practice, adolescence, surgery, circulations for patient, dentist, staff, different access for department like as easy access for reception and pedodontic dentistry, enclosure space for prosthodontics and surgery, frequency of visit and treatment care time, and change of treatment concept from treatment department to disease control corporative practice. Implications: This study is the starting point for the research of spatial configuration in dentistry and it is necessary to analyze the architectural planning to develop the dental healthcare system.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.473-478
• /
• 2010

Objectives: This study was performed to investigate the biocompatibility of newly introduced Bioaggregate on human pulp and PDL cells. Materials and Methods: Cells were collected from human pulp and PDL tissue of extracted premolars. Cell culture plate was coated either with Bioaggregate or white MTA, then the same number of cells were poured to cell culture dishes. Cell attachment and growth was examined under a phase microscope after 1,3 and 7 days of seeding. Cell viability was measured and the data was analyzed using Student t-test and one way ANOVA. Results: Both types of cells used in this study were well attached and grew healthy on Bioaggregate and MTA coated culture dishes. No cell inhibition zone was observed in Bioaggregate group. There was no statistical difference of viable cells between bioaggreagte and MTA groups. Conclusions: Bioaggregate appeared to be biocompatible compared with white MTA on human pulp and PDL cells.

• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.404-412
• /
• 2019

Objective: To assess shear bond strength and failure mode (Adhesive Remnant Index, ARI) of orthodontic brackets bonded to polymethylmethacrylate (PMMA) blocks for computer-aided design/manufacture (CAD/CAM) fabrication of temporary restorations, following substrate chemical or mechanical treatment. Methods: Two types of PMMA blocks were tested: $CAD-Temp^{(R)}$ (VITA) and $Telio^{(R)}$ CAD (Ivoclar-Vivadent). The substrate was roughened with 320-grit sandpaper, simulating a fine-grit diamond bur. Two universal adhesives, Scotchbond Universal Adhesive (SU) and Assure Plus (AP), and a conventional adhesive, Transbond XT Primer (XTP; control), were used in combination with Transbond XT Paste to bond the brackets. Six experimental groups were formed: (1) $CAD-Temp^{(R)}/SU$; (2) $CAD-Temp^{(R)}/AP$; (3) $CAD-Temp^{(R)}/XTP$; (4) $Telio^{(R)}$ CAD/SU; (5) $Telio^{(R)}$ CAD/AP; (6) $Telio^{(R)}$ CAD/XTP. Shear bond strength and ARI were assessed. On 1 extra block for each PMMA-based material surfaces were roughened with 180-grit sandpaper, simulating a normal/medium-grit ($100{\mu}m$) diamond bur, and brackets were bonded. Shear bond strengths and ARI scores were compared with those of groups 3, 6. Results: On $CAD-Temp^{(R)}$ significantly higher bracket bond strengths than on $Telio^{(R)}$ CAD were recorded. With XTP significantly lower levels of adhesion were reached than using SU or AP. Roughening with a coarser bur resulted in a significant increase in adhesion. Conclusions: Bracket bonding to CAD/CAM PMMA can be promoted by grinding the substrate with a normal/medium-grit bur or by coating the intact surface with universal adhesives. With appropriate pretreatments, bracket adhesion to CAD/CAM PMMA temporary restorations can be enhanced to clinically satisfactory levels.

• Imaging Science in Dentistry
• /
• v.51 no.3
• /
• pp.299-306
• /
• 2021

Purpose: This study aimed to propose a fully automatic landmark identification model based on a deep learning algorithm using real clinical data and to verify its accuracy considering inter-examiner variability. Materials and Methods: In total, 950 lateral cephalometric images from Yonsei Dental Hospital were used. Two calibrated examiners manually identified the 13 most important landmarks to set as references. The proposed deep learning model has a 2-step structure-a region of interest machine and a detection machine-each consisting of 8 convolution layers, 5 pooling layers, and 2 fully connected layers. The distance errors of detection between 2 examiners were used as a clinically acceptable range for performance evaluation. Results: The 13 landmarks were automatically detected using the proposed model. Inter-examiner agreement for all landmarks indicated excellent reliability based on the 95% confidence interval. The average clinically acceptable range for all 13 landmarks was 1.24 mm. The mean radial error between the reference values assigned by 1 expert and the proposed model was 1.84 mm, exhibiting a successful detection rate of 36.1%. The A-point, the incisal tip of the maxillary and mandibular incisors, and ANS showed lower mean radial error than the calibrated expert variability. Conclusion: This experiment demonstrated that the proposed deep learning model can perform fully automatic identification of cephalometric landmarks and achieve better results than examiners for some landmarks. It is meaningful to consider between-examiner variability for clinical applicability when evaluating the performance of deep learning methods in cephalometric landmark identification.

• The korean journal of orthodontics
• /
• v.51 no.5
• /
• pp.355-362
• /
• 2021

Objective: This study aimed to establish the prevalence and patterns of nonsyndromic tooth agenesis in patients referred to a tertiary health care facility. Methods: The intraoral records and panoramic radiographs of 9,874 patients aged 12-22 years were evaluated. The study group included 716 patients (371 male, 345 female) with non-syndromic agenesis of at least one tooth (except the third molars). The study data were assessed using descriptive statistics, chi-square test, and Mann-Whitney U test, while patterns were evaluated using a tooth agenesis code (TAC) tool. Results: A total of 1,627 congenitally missing teeth, were found in patients with non-syndromic tooth agenesis, with an average of 2.27 missing teeth per patient. The prevalence of tooth agenesis was 7.25%, and the most commonly missing teeth were the left mandibular second premolars (10.17%). The age group comparison revealed no significant difference in the median number of missing teeth per patient according to the cutoff values for ages between 12 and 22 years. When the missing teeth were examined separately according to quadrants, 114 different tooth agenesis patterns (upper right quadrant = 28, upper left quadrant = 27, lower left quadrant = 31, and lower right quadrant = 28) were identified, and 81 of these patterns appeared only once. Conclusions: This study highlights the benefits of applying the TAC tool in a large sample population. The application of the TAC tool in such studies will enable the development of template treatment plans by determining homogenous patterns of tooth agenesis in certain populations.

• The korean journal of orthodontics
• /
• v.51 no.5
• /
• pp.346-354
• /
• 2021

Objective: To compare the effectiveness of ibuprofen, acetaminophen, and chewing gum for orthodontic pain relief and to assess if chewing gum can be a non-pharmacological alternative for orthodontic pain relief. Methods: The study enrolled 106 patients of both sexes, aged ≥ 12 years, with body weight > 50 kg, and mild-to-moderate dental crowding in the upper arch. After randomization and allocation concealment, the intervention groups were either administered with ibuprofen (400 mg) or acetaminophen (500 mg) or chewed sugar-free chewing gum immediately after initial archwire placement and every 6 hours for 1 week if the pain persisted. The control group did not receive any pain relief. The pain was assessed on a 100-mm visual analog scale at rest and while biting down at T1 (2 hours), T2 (24 hours), T3 (2 days), T4 (3 days), T5 (7 days), and T6 (21 days). Statistical analyses were performed using the Kruskal-Wallis and post-hoc Mann-Whitney U tests (α = 0.05). Results: The chewing gum group experienced more pain relief than the ibuprofen group at while biting down at T3 (p = 0.04) and at rest at T4 (p < 0.001). The chewing gum group reported more pain relief than the acetaminophen and control groups while biting down at T3 (p = 0.03 and p = 0.0006, respectively) and T4 (both p < 0.001). Conclusions: Chewing gum can be a non-pharmacological alternative for orthodontic pain relief at 2 and 3 days after initial archwire placement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.30.1-30.7
• /
• 2020

Background: Dental studies of precocious puberty have focused on examination of jaw and dentition growth. The aim of the study was to analyze the relationship between precocious puberty and maxillary dental developmental abnormalities (DDAs). Methods: This retrospective study was conducted on the Korean patients in whom dental panoramic and hand-wrist radiographs had been taken before they were 15 years of age. The maxillary DDAs were assessed as mesiodens, congenital missing teeth, peg-shape lateral incisors, or impacted teeth. The chronological ages of the control group members were within the normal range of the hand-wrist bone age. Others with a peak luteinizing hormone of ≥ 5 and < 5 IU/L were allocated to central precocious puberty (CPP) and peripheral precocious puberty (PPP), respectively. Results: Of the enrolled 270 patients, 195, 52, and 23 were allocated to the control, CPP, and PPP groups, respectively. The maxillary DDAs were significantly more prevalent in the CPP group than in the other groups. Among those with maxillary DDA, the mesiodens predominated. Age- and sex-adjusted multivariate analysis revealed maxillary DDA (odds ratio, 3.36; 95% CI, 1.60-7.05) and especially mesiodens (odds ratio, 5.52; CI, 2.29-13.28) to be significantly associated with CPP. Conclusions: Maxillary DDAs were significantly more prevalent in the CPP group than in the PPP or control groups. Among the many types of maxillary DDAs, mesiodens was significantly associated with CPP and may be considered a predictor of the development of CPP.

• The korean journal of orthodontics
• /
• v.49 no.1
• /
• pp.59-69
• /
• 2019

In this report, we describe a case involving a 34-year-old woman who showed good treatment outcomes with long-term stability after multidisciplinary treatment for unilateral cleft lip and palate (CLP), maxillary hypoplasia, severe maxillary arch constriction, severe occlusal collapse, and gingival recession. A comprehensive treatment approach was developed with maximum consideration of strong scar constriction and gingival recession; it included minimum maxillary arch expansion, maxillary advancement by distraction osteogenesis using an internal distraction device, and mandibular setback using sagittal split ramus osteotomy. Her post-treatment records demonstrated a balanced facial profile and occlusion with improved facial symmetry. The patient's profile was dramatically improved, with reduced upper lip retrusion and lower lip protrusion as a result of the maxillary advancement and mandibular setback, respectively. Although gingival recession showed a slight increase, tooth mobility was within the normal physiological range. No tooth hyperesthesia was observed after treatment. There was negligible osseous relapse, and the occlusion remained stable after 5 years of post-treatment retention. Our findings suggest that such multidisciplinary approaches for the treatment of CLP with gingival recession and occlusal collapse help in improving occlusion and facial esthetics without the need for prostheses such as dental implants or bridges; in addition, the results show long-term post-treatment stability.

• The korean journal of orthodontics
• /
• v.49 no.4
• /
• pp.246-253
• /
• 2019

Objective: To evaluate the effectiveness of three different caries-preventing agents on artificial caries in a Streptococcus mutans-based caries model. Methods: Sixty-five caries-free human molar enamel blocks were treated with a demineralization solution and a remineralization solution. The specimens were assigned to the following groups according to the caries-protective product applied: group A, chlorhexidine varnish; group B, fluoride-releasing chemically cured sealant; group C, fluoride-releasing lightcured sealant; group D, positive control (specimens that were subjected to de- and remineralization cycles without treatment with any caries-protective agents); and group E, negative control (specimens that were not subjected to de- and remineralization cycles). Samples in groups A-D were stored in demineralization solution with S. mutans and thereafter in artificial saliva. This procedure was performed for 30 days. Average fluorescence loss (${\Delta}F$) and surface size of the lesions were measured using quantitative light-induced fluorescence at baseline and on the 7th, 14th, and 30th days. Results: After 30 days, group A demonstrated a significant increase in ΔF and the surface size of the lesions, no significant difference in comparison with the positive control group, and a significant difference in comparison with the negative control group. Group B showed no significant changes in both parameters at any of the measurement points. While group C showed increased ${\Delta}F$ after 14 days, no significant fluorescence change was observed after 30 days. Conclusions: Both fluoride-releasing sealants (chemically or light-cured) show anti-cariogenic effects, but the use of chlorhexidine varnish for the purpose of caries protection needs to be reconsidered.

• Journal of Periodontal and Implant Science
• /
• v.49 no.3
• /
• pp.185-192
• /
• 2019

Purpose: Implant wall thickness and the height of the implant-abutment interface are known as factors that affect the distribution of stress on the marginal bone around the implant. The goal of this study was to evaluate the long-term effects of supracrestal implant placement and implant wall thickness on maintenance of the marginal bone level. Methods: In this retrospective study, 101 patients with a single implant were divided into the following 4 groups according to the thickness of the implant wall and the initial implant placement level immediately after surgery: 0.75 mm wall thickness, epicrestal position; 0.95 mm wall thickness, epicrestal position; 0.75 mm wall thickness, supracrestal position; 0.95 mm wall thickness, supracrestal position. The marginal bone level change was assessed 1 day after implant placement, immediately after functional loading, and 1 to 5 years after prosthesis delivery. To compare the marginal bone level change, repeated-measures analysis of variance was used to evaluate the statistical significance of differences within groups and between groups over time. Pearson correlation coefficients were also calculated to analyze the correlation between implant placement level and bone loss. Results: Statistically significant differences in bone loss among the 4 groups (P<0.01) and within each group over time (P<0.01) were observed. There was no significant difference between the groups with a wall thickness of 0.75 mm and 0.95 mm. In a multiple comparison, the groups with a supracrestal placement level showed greater bone loss than the epicrestal placement groups. In addition, a significant correlation between implant placement level and marginal bone loss was observed. Conclusions: The degree of bone resorption was significantly higher for implants with a supracrestal placement compared to those with an epicrestal placement.