• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.334-341
• /
• 1998

This paper proposes an algorithm to obtain the time-to-contact between an observer and a target and surface orientation of the target. These two physical elements are computed from the image deformation of a known shape, which is extracted by supervised classification of detected line segments based on MAP and Mahalanobis distance. The proposed algorithm was applied to the natural outdoor traffic scene and would contribute to the development for a collision avoidance system.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.161-165
• /
• 1997

For high performance ac drives, the speed sensorless vector control and the stator flux orientation concept have received increasing attention. This paper presents a new method of estimation the speed of AC induction machine(IM). To improve the speed estimation characteristics, accurate stator resistance variation is considered. The effectiveness of the proposed method is verified computer simulation.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.571-574
• /
• 1997

항법장치의 핵심요소인 가속도센서와 자이로센서는 선형거리추측(Linear position estimation)과 각 변위 추측(orientation estimation)시 출력 데이터에 포함된 오차성분의 적분에 의하여 시간이 증가함에 따라 선형거리 오차와 각 변위 오차가 누적된다. 이에 따라 본 논문에서는 정밀한 항법을 위한 저가의 IMU (Inertial Measurement Unit)를 설계하고, 오차성분의 사전해석을 통하여 정확한 오차모델을 찾는데 그 목적이 있다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.39-43
• /
• 2004

A typical theme of active vision systems is gaze-fixing of a camera. Here gaze-fixing of a camera means by steering orientation of a camera so that a given point on the object is always at the center of the image. For this we need to combine a function to analyze image data and a function to control orientation of a camera. This paper presents an algorithm for gaze-fixing of a camera where image analysis and orientation control are designed in a frame. At this time, for avoiding difficulties in implementing and aiming for real-time applications we design the algorithm to be a simple closed-form without using my information related to calibration of the camera or structure estimation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.6
• /
• pp.563-570
• /
• 2014

This paper purposes on stimulating the dynamic behavior of a floating structure model with the image processing and the close-range photogrammetry, instead of the contact sensors. Previously, the movement of structures was presented by the exterior orientation estimation from a single camera following the space resection. The inverse resection yields to 6 orientation parameters of the floating structure, with respect to the camera coordinates system. The single camera solution of interest in applications is characterized by the restriction in terms of costs, unfavorable observation conditions, or synchronization demands when using multiple cameras. This paper discusses the theoretical determinations of camera exterior orientation by using the least squares adjustment, applied of the values from the DLT (Direct Linear Transformation) and the photogrammetric resection. This proposed method is applied to monitor motions of a floating model. The results of 6DOF (Six Degrees of Freedom) from the inverse resection were signified that applying appropriate initial values from DLT in the least square adjustment is effective in obtaining precise exterior orientation parameters. Therefore, the proposed method can be concluded as an efficient solution to simulate movements of the floating structure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.219-221
• /
• 2014

The objective of this paper is to simulate the dynamic behavior of a floating structure model, using image processing and close-range photogrammetry, instead of the contact sensors. Previously, the movement of structure was presented through the exterior orientation estimation of a single camera by space resection. The inverse resection yields the 6 orientation parameters of the floating structure, with respect to the camera coordinate system. The single camera solution is of interest in applications characterized by restriction in term of costs, unfavorable observation conditions, or synchronization demands when using multiple cameras. This article discusses the theoretical determinations of camera exterior orientation based on Direct Linear Transformation and photogrammetric resection using least squares adjustment. The proposed method was used to monitor the motion of a floating model. The results of six degrees of freedom (6-DOF) by inverse resection show that the appropriate initial values by DLT can be effectually applied in least squares adjustment, to obtain the precision of exterior orientation parameters. Additionally, a comparison between the close-range photogrammetry and total station results was feasibly verified. Therefore, the proposed method can be considered as an efficient solution to simulating the movement of floating structure.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.326-331
• /
• 1990

In the vector-controlled induction machine drive, mechanical sensors restrict the wide applications of high performance AC drives. So in resent years, many papers have been presented which doesn't need mechanical sensors, named by sensorless vector control. But sensorless control has a few serious problem, one of which Is poor speed estimation in case of incorrect rotor resistance (Rr) information. This paper describes the stator flux orientation speed control strategy with the speed estimation algorithm. and the method of adapting Rr change due to thermal heating. By proposed method. We can acquire precise speed estimation and higher performance.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.586-588
• /
• 2004

Although stable control algorithm has been implemented to the biped robot, the stability is not guaranteed because of encoder errors and/or rigid body elastics. Hence precise body pose estimation is required for more natural and long term walk. Specially pelvis sloping by gravity or uneven ground on landing place are most critical reason for undulated motion. In order to overcome these difficulties an estimation system for foot position and orientation using PSD sensors and Gyro sensors is proposed along with calibration algorithm and experimental verification.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.483-487
• /
• 1996

We consider the estimation of the position and orientation of 6 DOF motion bed (Stewart platform) from the measured cylinder length. The solution of forward kinematics is not solved yet as a useful realtime application tool because of the complity of the equation with multiple solutiple solutions. Hence we suggest an algorithm for the estimation of forward kinematics solution using Luenberger observer withnonlinear error correction term. The Luenberger observer withlinear model shows that the estimation error does not go to zero in steadystate due to the linearization error of the dynamic model. Hence the linear observer is modified using nonlinear measurement error equation and we prove thd practical stability of the estimation error dynamics of the proposed observer using lyapunov function.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.9-14
• /
• 2006

This paper presents methods of robot localization using recent radio frequency identification technology. If the absolute position and orientation of a tag are given in an indoor environment where RFID tags are installed, a robot can estimate its location using the relationship of the identified tag and the robot in a relative coordinate. To derive this relationship, we propose three estimation techniques using a model of a RFID reader, the direction of identification and the detection range. In this algorithm, a suitable estimation method is selected out of the three proposed techniques depending on the situations and trajectory of robot in the detection range. Simulation and experimental results show that the proposed methods can provide good performance for localization.