• 한국자기학회지
• /
• 제9권5호
• /
• pp.256-262
• /
• 1999

DC/RF magnetron sputtering system을 이용하여 CoCr 박막 및 CoCrMo 박막의 Si 하지층의 도입에 따른 자기적 특성 및 미세구조의 변화에 대해 살펴보았다. 박막의 자기적 특성을 VSM을 통하여 측정한 결과, 고온에서 증착된 CoCrMo/Si 박막의 경우가 CoCr/Si 박막과는 달리 Si 하지층의 두께가 증가할수록 수직보자력값이 증가하는 것을 알 수 있었으며 AFM과 SEM을 이용한 surface morphology의 변화를 통하여 결정립 미세화와 균일화가 수직보자력을 증진시킴을 알 수 있었다. 또한, 박막의 결정배향성 및 미세구조를 XRD와 SEM을 통하여 관찰한 결과, CoCrMo/Si 박막의 (0002)우선 배향성이 CoCr/Si 박막의 (0002) 우선 배향성보다 상당히 크게 증진된 것을 볼 수 있었으며, SEM의 단면 측정을 통하여 CoCrMo/Si 박막과 CoCr/Si 박막의 기판 표면에서 성장하는 columnar 구조의 발달을 잘 관찰할 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.202-205
• /
• 2008

We have studied the liquid crystal (LC) orientation behavior on the organic hybrid overcoat layer with ion beam irradiation. Excellent LC alignments of the nematic liquid crystal (NLC) on the ion beam irradiated organic hybrid overcoat layers were observed in various intensities above 600 eV. Pretilt angles of the NLC on the organic hybrid overcoat layers for all ion beam energy intensities were observed from 0.2 to 0.5 degrees. Also, we used the atomic force microscopy (AFM) images for measuring the roughness of the organic hybrid overcoat layers with ion beam irradiation before and after. The surface of organic hybrid overcoat layers was leveled off by the ion beam irradiation. Finally, a good LC alignment thermal stability on the organic hybrid overcoat layer with ion beam irradiation can be achieved.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 International Symposium
• /
• pp.261-278
• /
• 2003

Concepts.Wafer-Level Chip-Scale Concept with Handling Substrate.Low Accuracy Placement Layout with Isolation Trench.Possible Pitch of Interconnections down to $10{\mu}{\textrm}{m}$ (Sn-Grains).Wafer-to-Wafer Equipment Adjustment Accuracy meets this Request of Alignment Accuracy (+/-1.5 ${\mu}{\textrm}{m}$).Adjustment Accuracy of High-Speed Chip-to-Wafer Placement Equipment starts to meet this request.Face-to-Face Modular / SLID with Flipped Device Orientation.interchip Via / SLID with Non-Flipped Orientation SLID Technology Features.Demonstration with Copper / Tin-Alloy (SLID) and W-InterChip Vias (ICV).Combination of reliable processes for advanced concept - Filling of vias with W as standard wafer process sequence.No plug filling on stack level necessary.Simultanious formation of electrical and mechanical connection.No need for underfiller: large area contacts replace underfiller.Cu / Sn SLID layers $\leq$ $10{\mu}{\textrm}{m}$ in total are possible Electrical Results.Measurements of Three Layer Stacks on Daisy Chains with 240 Elements.2.5 Ohms per Chain Element.Contribution of Soldering Metal only in the Range of Milliohms.Soldering Contact Resistance ($0.43\Omega$) dominated by Contact Resistance of Barrier and Seed Layer.Tungsten Pin Contribution in the Range of 1 Ohm

• 한국자기학회지
• /
• 제12권1호
• /
• pp.34-40
• /
• 2002

고에너지 Nd-Fe-B 소결자석 제조용 strip-cast 합금의 미세조직 개선을 위하여, Nd-Fe-B 합금을 다양한 조건하에서 strip casting법으로 제조한 후, 제조 조건이 상 형성, 상 분포 및 조직 형성에 미치는 영향을 조사하였다. 냉각속도 즉, wheel speed가 5 m/s 이하일 때 고특성 소결자석 제조에 적합한 미세조직을 갖는 Strip 합금들을 제조할 수 있었으며, 이때의 한계 조성은 Nd$_{14}$Fe$_{79}$B$_{7}$ 정도로 추정되었다. 또한 조성에 상관없이 5 m/s 이하에서는 strip 표면에 수직한 방향으로 <001> preferred orientation이 발생하였는데, 이것은 궁극적으로 합금의 분쇄.성형시 결정립 배향도 향상에 유리하게 작용할 것으로 보인다. 한편 냉각속도가 증가할수록 Nd$_2$Fe$_{14}$B 결정립의 미세화로 인하여 보자력이 증가하였으나, Nd 함량이 감소할 경우 $\alpha$-Fe 정출의 증가로 인하여 보자력이 감소하였다.

• 한국정보처리학회논문지
• /
• 제4권11호
• /
• pp.2840-2848
• /
• 1997

컴퓨터 비전을 이용한 3차원 물체 인식은 카메라의 위치에 따라 화상에 투영되는 물체의 형상이 변하기 때문에 매우 복잡하고 어렵다. 따라서 컴퓨터 비전을 이용한 효과적인 인식 시스템을 구축하기 위해서는 각 3차원 물체에 있어서 유일하고 중요한 특성이 보는 각도에 따라 어떻게 변화하는가를 분석하고 이해하는 것이 매우 중요한 요소이다. 본 연구에서는 특징점들(landmarks)간에 이루어지는 각도 또는 3차원 다각형의 모서리(edge) 사이의 각도를 중요한 특성으로 선택하였고, orthographic 투영과 isotropic view orientation 아래에서 그러한 각도들의 보는 방향에 따른 화상에서의 변화를 2차원 결합 밀도 함수로 유도하였다. 본 논문에서 구한 수리적인 결합 밀도 함수는 통계적인 판단 규칙을 적용하여 효과적으로 물체 인식에 적용될 수 있다. 제안된 방법의 타당성 검토를 위하여 간단한 실험을 수행하였으며, 실험결과 본 방법 이 매우 효과적인 것으로 나타났다．

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.188-188
• /
• 2009

We have studied the optically compensated splay (OCS) mode using reactive mesogen (RM) monomer to reduce critical voltage, setting voltage and phase transition time from initial bend to splay state. Through the polymerization of UV curable RM monomer, the high pretilt angle from vertical alignment was formed at the surfaces. In this way, orientation of the LC with OCS mode can be achieved without setting voltage and improved electric characteristic.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.50-56
• /
• 2004

The directional ability of an automobile has an influence on driver directly, and hence it must be given most priority. Alignment factors of automobile such as the camber, caster and toe directly affect the directional ability of a vehicle. The above mentioned factors are determined by the pose of interlinks in the assembly of an automobile front chassis module. Measuring the position of center point of ball joints in the front lower arm is very difficult. A method to determine this position is suggested in this paper. Pose estimation for front chassis module and dimensional evaluation to find the rotational characteristics of front lower arm were developed based on fundamental geometric techniques. To interpret the inspection data obtained for front chassis module, 3-D best fit method is needed. The best fit method determines the relationship between the nominal design coordinate system and the corresponding feature coordinate system. The least squares method based on singular value decomposition is used in this paper.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.150-153
• /
• 1997

Langmuir-Blodgett(LB) technique is one of the ways of fabricating organic ultra-thin films. It is well known that It has the advantage to control the alignment and orientation of the molecules in the films. Metallo-phthalocyanines(MPcs) are sensitive to electron affinitive toxic gaseous molecules, such as NO$_2$, NO, SO$_2$. MPcs are thermal, optical, mechanical, chemical stable. Therefore, it is interesting to prepare phthalocyanine LB films containing copper as a chemical sensor for NO$_2$ and SO$_2$ gas and test their sensitivity to these toxic gases. In this study, thin films of Octa-dodecylosy copper-phthalocyanine were prepared by LB technique. $\pi$-A isotherm, transfer ratio, UV-VIS. spectroscopy of these films were investigated. Also current-voltage(I-V) characteristics of these was auto investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.146-149
• /
• 1997

It is well known that the metallo-phthalocyanines(MPcs) are sensitive to toxic gaseous molecules, such as NO$_2$, NO, SO$_2$. MPcs are thermally, optica1ly, mechanically and chemically stable. Therefore, it is interesting to prepare phthalocyanine LB films containing tin as a chemical sensor for NO$_2$ and SO$_2$ gas and test their sensitivity to these toxic gases. Frist, in this study, ultra thin films of Octa-dodecyloxy tin-phthalocyanine were prepared on various substrates by LB technique. Langmuir-Blodgett(LB) technique is one of the ways of fabricating organic thin films. It has the advantage to control the alignment and orientation of the molecules in the films. $\pi$-A isotherm and transfer ratio of tin-phthalocyanine derivative. UV-VIS. spectroscopy were investigated. Also intrinsic current-voltage(1-V) characteristics of these films was investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.327-329
• /
• 2008

We have studied the optically compensated splay (OCS) mode using reactive mesogen monomer to reduce critical voltage, setting voltage and phase transition time from initial bend to splay state. The high pretilt angle from vertical alignment was formed through the polymerization of UV curable RM monomer at the surfaces. In this way, orientation of the LC with OCS can be achieved without setting voltage.