• The Korean Journal of Ceramics
• /
• 제3권4호
• /
• pp.257-262
• /
• 1997

Aluminum nitride(AIN) thin films were deposited on SiO$_2$/Si substrates by reactive sputtering for the application of SAW devices. The major deposition parameters such as pressure, nitrogen fraction, rf power, substrate distance were changed to find out the optimal condition for c-axis oriented thin films on an amorphous substrate. The effects of deposition parameters on the crystal structure, residual stress, and growth morphology of thin films were characterized by XRD, SEM, and TEM. The FWHM of (002) rocking curve of the films deposited at the proper condition was lower than 2.2$^{\circ}$(C=0.93$^{\circ}$). Cross-sectional TEM showed that self-aligned structure was developed just after slightly random growth at the initial stage. The frequency characteristics of test device fabricated from AIN thin films confirmed their piezoelectric property and applicability for SAW devices.

• Transactions on Electrical and Electronic Materials
• /
• 제11권6호
• /
• pp.285-287
• /
• 2010

This paper introduces homogeneous liquid crystal (LC) orientations on chemically modulated polystyrene (PS) surfaces using various ion beam (IB) exposure times. Transparent PS was replaced with conventional polyimide material. As a non-contact process, the IB bombardment process induced LC orientation parallel to the IB process. Through x-ray photoelectron spectroscopy, it was shown that the chemical compositional changes of the IB-irradiated PS surfaces were determined as a function of IB exposure time. Using this analysis, the optimal IB bombardment condition was determined at an IB exposure time of up to 15 seconds. Moreover, thermal stability on IB-irradiated PS surfaces were carried out which showed that a relatively high IB exposure time induced a thermally stable LC alignment property.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.527-531
• /
• 2006

In order to study the influence of post-annealing treatment on the frequency characteristics of the Li doped ZnO(Li:ZnO) FBAR(Film Bulk Acoustic Resonator) device, we investigated the material and electrical properties of Li:ZnO films in the annealing temperature range from 300 to $500^{\circ}C$. In our samples, as annealing temperature was increased, Li:ZnO films showed the improvement of high c-axis orientation and resistance value with relieved stress and low surface roughness. In addition to, the return loss in the frequency property of fabricated FBAR was improved by annealing treatment from 24.9 to 29.8dB. From experimental results, the optimum post-annealing temperature for FBAR is $500^{\circ}C$ and it can obtain excellent Li:ZnO FBAR performance with stronger c-axis orientation, smoother surface, relieved stress, and lower loss factor.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.536-541
• /
• 2002

This paper proposes an approach of automatically calculating the center location of fiducial marks up to sub-pixel accuracy with model-free condition. The conceptual model, composed of two assumptions, about general geometric property of fiducial area and fiducial mark is established. The proposed approach is primarily based on the strategy of calculating the center of symmetry and is composed of three steps of processing: (a) determining horizontal center of fiducial area, (b) locating center of a fiducial mark, and, (c) finally calculating the exact center up to sub-pixel accuracy. Evaluation with respect to RMK style marks and RC style ones shows that the proposed approach can be evaluated as robust one. However there are several images which can't be analyzed by the proposed approach.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.38-44
• /
• 1995

This paper presents a method to measure the position and orientation of a Cylindrical Object(unknown the eiameter and length) lying on a floor, using a camera. The two extreme cross section of the cylinder will be viewed as distorted ellipese or circular are, while its limb edge will be shown as two straight lines. The diameter of the cylinder is determined from the geometric properties of the two straight lines, which in turn provides information regarding the length of the cylinder. From the 3-dimensional measurement, the 3D coordinates of the center points of the two extreme cross sections are determined to give the position and orientation of the cylinder. This method is used for automated pick-and-place operations of cylinder, such as sheet coils, or drums in warehouses.

• Composites Research
• /
• 제20권5호
• /
• pp.13-19
• /
• 2007

섬유강화 열가소성수지 복합재료는 열경화성수지 복합재료의 강도 수준에 근접할 뿐만 아니라 열경화성수지 복합재료의 취약점으로 지적되고 있는 생산성, 리사이클, 내충격성 등이 우수하다. 일방향 섬유강화 복합재료의 강도계산을 위한 연구와 섬유배향상태를 측정하여 정량적으로 나타낼 수 있도록 연구하여 발표하였으나, 섬유함유율에 따른 섬유배향상태와 복합재료의 기계적 성질을 예측을 할 수 있는 데이터베이스 구축은 되어있지 않으므로 이에 대한 체계적인 연구가 필요하다 본 연구에서는 섬유함유율에 따른 섬유배향상태를 변화시켜 섬유강화 열가소성수지 복합판재를 제작한 후, 섬유함유율 및 섬유배향상태가 복합판재의 인장강도에 어떠한 영향을 주는지에 대해서 고찰하였다. 섬유강화 열경화성수지 복합재료의 $0^{\circ}$ 방향에서 인장강도 비는 등방성에서 이방성으로 갈수록 섬유배향함수와 섬유함유율에 관계없이 일정하게 나타났으나, $90^{\circ}$ 방향에서 인장강도 비는 인장 하중이 강화섬유 길이방향의 수직방향으로 작용했을 때 섬유필라멘트 분리에 의해 감소하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.135-142
• /
• 2004

The apparent advantages of FRP (fiber reinforced plastics) composites over the conventional structural materials may be attributed to their high specific strength and stiffness. Other affordable properties of FRPs including an excellent durability make them particularly attractive for the structures in severe service conditions. Therefore, the material and sectional properties of a FRP structural component should be designed to meet its specific requirements and service conditions. This paper is performed the material property optimization under optimum design of pultruded FRP bridge deck section. In the problem formulation, an objective function is selected to minimize the maximum R(strength ratio). The thickness of layers, volumes of fibers and matrix fiber orientation, and stacking sequence of FRPs are used as the design variables. Strength ratio in the design code, material failure criteria and pultruded manufacture thickness are selected as the design constraints to enhance the material performance of FRP decks. From the results of the numerical investigation, we obtained the optimum deck section profile for conventional using object.

• 대한가정학회지
• /
• 제38권3호
• /
• pp.43-57
• /
• 2000

The aims of this study were to analyze the influence of related variables on a mode of housing life style, and the related variables to propensity to housing life stymie. The results of this study were as follows: 1. Variables influencing value orientation of family life were property and the price of housing. 2. Variables influencing spending habits were objective social class (SES), types of residence, education of wife, and price of housing. 3. Variables influencing propensity to using space were found to be objective social class (SES), education of wife, types of homeownership, and price of housing. 4. Variables influencing housing life style were objective social class (SES), subjective social class, housing class, family life cycle, housing life cycle, types of residence, site of residence, age of husband, age of wife, education of husband, education of wife, income, property, job of husband, types of homeownership, size of housing, and price of housing.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.102-102
• /
• 2003

TLCP/polyester composite fibers (TPCFs) based on melt blends of PEN, PET, and TLCP were prepared by melt blending and spinning process to achieve high performance fibers. Reinforcement effect and TLCP fibrillar structure resulted in improvement of mechanical properties for TPCFs. The increase in the apparent crystallite size was attributed to the development of larger crystallites and more ordered crystalline structures in the annealed TPCFs. Molecular orientation was an important factor to determine mechanical property of TPCFs.

• 한국염색가공학회지
• /
• 제4권1호
• /
• pp.26-29
• /
• 1992

Ternary solutions that cellulose triacetate (CTA) and polyethylene terephthate (PET) were mixed in a solvent trifiuoroacetic acid (TFA)/methylene chloride (MC) (6/4 : v/v) showed phase separation and mesophase formation. The ternary systems which were mesomorphic were spun into a methanol both and relatively strong cellulosic fillaments were successfully produced. Analysis showed that CTA/PET fibers have fibrillar structure and high orientation parallel to the fiber axis. These fibers proved to be molecular composite and have relatively high strength and modulus as spun.