• Environmental Engineering Research
• /
• v.17 no.4
• /
• pp.191-196
• /
• 2012

Analysis of hydrological safety as well as the determination of many substance concentrations are necessary when bioreactor systems are introduced to landfill operations. Therefore, hydrological and substance balance model was developed since it can be applied to various bioreactor landfill operation systems. For the final evaluation of the model's effectiveness, four different methods of injections (leachate alone, leachate and organic waste water, leachate and reverse osmosis concentrate, and all the above three combination) was applied to 1st landfill site of Sudokwon landfill. As a result, the water content of the hypothetical cases for four different systematic bioreactors is projected to be increased up to 35.5% in next 10 years, and this indicated that there will be no problems in meeting the hydrological safety. Also, the final $Cl^-$ concentration after 10-yr time period was projected to be between from minimum 126 to maximum 3,238 mg/L, which could be still a decrease from the original value of 3,278 mg/L. According to the proposed model, whether the substance concentration becomes increased or decreased largely depends on the ratio of initial quantity of inner landfill leachate and the rate of injection.

• Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.112-118
• /
• 2008

Residual solid in excess sludge treated by hydrothermal reaction was investigated as raw material for its recycling. Treated excess sludge and residual solid were also focused on their content change during hydrothermal reaction. Two kinds of excess sludge, obtained from a local food factory and a municipal wastewater treatment process, were tested under various conditions. Following hydrothermal reaction, depending on the reaction conditions, biodegradable substrates in treated excess sludge appeared to increase. The separated residual solid was a composite composed of organic and inorganic materials. The proportion of carbon varied from 34.0 to 41.6% depending on reaction conditions. Although 1.89% of hazardous materials were detected, SiO2 (Quartz) was a predominant constituent of the residual solid. X-ray diffraction (XRD) experiments revealed that the residual solid was of a partially amorphous state, suggesting that the residual solids could be easily converted to stable and non harmful substances through a stabilization process. Thus, this technology could be successfully used to control excess sludge and its reuse.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.655-655
• /
• 2002

Spatial distribution of phytoplankton pigment concentration (PPC) and sea surface temperature (SST) around the East Korean Warm Current (EKWC) was described, using both ocean color images and advanced very high resolution radiometer (AVHRR) images. Water mass in this region can be classified into five categories in the horizontal profile of PPC and SST, nLw(normalized water-leaving radiance) images: (1) coastal cold water region associated with concentrations of dissolved organic material or yellow colored substances and suspended sediments, (2) cold water region of thermal frontal occurred by a combination of phytoplankton absorption and suspended materials, (3) warm water overlay region by the phytoplankton absorption than the suspended materials; (4) warm water region occurred by the low phytoplankton absorption, and (5) offshore region occurred by the high phytoplankton absorption. In particular, the highest PPC area appeared in the ocean color and SST images with a band shaped distribution of the thermal front and ocean color front region, which is located the coastal cold waters along western thermal front of the warm streamer of the EKWC.

• The Korean Journal of Mycology
• /
• v.23 no.4 s.75
• /
• pp.354-358
• /
• 1995

A yeast loading biochemical oxygen demand (BOD) sensor was designed and constructed to quickly measure the concentration of biologically assimilable organic substances dissolved in water as BOD values to feed back to the waste water treating processes. The sensitivity of the BOD sensor reached maximum at around pH 7.0 and $30^{\circ}C$ where yeast showed the highest assimilation activity. Biomass also affected the sensor output, and biomass of $ 0.14\;mg/cm^2$ on the dialysis membrane appeared to be the optimum cell mass level. The sensitivity of the sensor depended on the kinds of pollutants and increased considerably when the yeast was preincubated in the solution of respective pollutants before loading on the sensor.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.1
• /
• pp.52-59
• /
• 2012

Objectives: The purpose of this study was to evaluate the exposure possibility of by-products during the semiconductor manufacturing processes. Methods: The authors investigated types of chemicals generated during semiconductor manufacturing processes by the qualitative experiment on generation of by-products at the laboratory and a literature survey. Results: By-products due to decomposition of photoresist by UV-light during the photo-lithography process, ionization of arsine during the ion implant process, and inter-reactions of chemicals used at diffusion and deposition processes can be generated in wafer fabrication line. Volatile organic compounds (VOCs) such as benzene and formaldehyde can be generated during the mold process due to decomposition of epoxy molding compound and mold cleaner in semiconductor chip assembly line. Conclusions: Various types of by-products can be generated during the semiconductor manufacturing processes. Therefore, by-products carcinogen such as benzene, formaldehyde, and arsenic as well as chemical substances used during the semiconductor manufacturing processes should be controlled carefully.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.120-129
• /
• 1997

The fire protective coating can reduce certain damages in case of fire, also conserve energy by thermal insulation and prevent corrosion and errosion in normal daily life by means of blocking thermal transfer, that were generally made of organic, inorganic and metallic materials as adiabatic coating. In case of inorganic material such as soluble silicate, it produces less toxic substances which are exposed to Ore, and have a plenty of raw material. Also inorganic thermal insulator is good in heat resistance. To develope such a excellent inorganic thermal insulator, the study of fire protective coating using the alkali silicate is necessary The principle of intumescence for alkali silicate is from rapid evolution of water in the coating material, the quantity of water in it is of course influenced on the degree of intumescence. The phenomenon of intumescence in ternary silicate is increased as the radius of ion is bigger, and this is caused by evolution of so many kinds of water. The individual degree of intumescence is ordered like this ; $K^+$ > $Na^+$ > $Li^+$ . The best protection effect is similarity found to intumescence of ternary silicate. The result of X-ray diffraction analysis indicates that $KHSi_2O_5$ is an important ingredient in K-silicate.

• Journal of Nutrition and Health
• /
• v.30 no.7
• /
• pp.803-812
• /
• 1997

The influences of dietary supplements of vitamin E on hepatocellular chemical carcinogenesis have been studied, Placental glutathione S-transferase(GST-P) positive foci area, antioxidant enzymes(superoxide dismutase(SOD), catalase, glutathione reductase, glutathione peroxidase, glutathione S-transferase(GST)), glucose 6-phosphatase(G6Pase) activities, and lipid peroxidation of mecrosomes(thiobarbituric acid reactive substances(TBARS) contents) were investigated. For is purpose , we used the murine chemical hepatocardinogenic procedure induced by modified Ito model, which consists of 200mg/kg body weight diethylinitrosamine (DEN) injection, 0.01% 2-acethlaminoflurene(2-AAF) feeding for 6 weeks, and partial hepatectomy on week 3. Weanling Sprague-Dawley male rats were fed pulverized Purina rat chow with 15, 000IU/kg diet vitamin E from initiation or promotion stages. We found that vitamin E supplement decreased the area of GST-P positive foci. Catalase, glutathione peroxidase, glutathione reductase. GST activities, and TBARS contents were decreased. On the other hand G6Pase activities were increased by vitamin E supplement. It seemed that vitamin E supplements helped endogenous defense systems against carcinogenesis by decreasing TBARS contents, $H_2O$$_2$ and organic peroxides. So, vitamin E seemed to protect cell from free radical damage in carcinogenesis. Anticarcinogenic effects of vitamin E were more effective at intiation that at promotion stage. These results suggest that vitamin E has suppressive effects on hepatocellular chemical carcinogenesis, probably through antioxidant effects against TBARS contents $H_2O$$_2$ and orgainc peroxides.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.1
• /
• pp.86-94
• /
• 2020

This study serves as basic research for the development of a new wood-based building finishing material that improved the weakness of inorganic materials such as gypsum board and magnesium board widely used as interior finishing materials and brought out the strength of the wood. The results of evaluating the physical and mechanical properties and the environmental effect related to hazardous substance discharge having manufactured a wood-magnesium laminated composite are as follows. The thermal conductivity and thermal resistance of WML board was improved by about 28~109 percent over magnesium board due to the low thermal conductivity of wood. The adhesive strength of WML board showed a similar result to that of plywood as it exceeds 0.7N/㎟, the adhesive standard of wood veneer which is presented by KS F 3101. Bending strength and screw holding strength were more improved by manufacturing WML board than magnesium board. The WML board manufactured in this study satisfied the criteria for emissions of hazardous substances prescribed in the Indoor Air Quality Control Act, and confirmed the possibility of development as a new wood-based composite material that can replace existing inorganic materials.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.237-243
• /
• 2019

This study analyzed satisfaction with and washing of newborn clothing (especially the innerwear washing behaviors) which are considered to be the most basic items among newborn clothing.The survey was conducted on mothers with children under 24 months old. Using an average of 6.7 innerwear items that were changed average 2.3 times a day with baby formula and breast milk representing the main contaminants. When washing clothes for a newborn, respondents were mainly concerned with: rinsing residual detergent, removing stains and contaminants, and sterilization and disinfection. Items were washed by a laundry label to prevent clothes damage. A baby-friendly or environmentally-friendly detergent was used to wash before being worn after purchase was separated and washed in various washing courses of the washing machine every day, boiled, rinsed an average 3.6 times, and dried mainly in the sun. Environmentally friendly cotton (59.5%) and organic cotton (41.6%) products were mainly used; however, items were washed separately from regular laundry. Respondents were satisfied with methods of washing. Consumers are concerned about washing because they think that washing affects a newborn's health. Therefore, it is necessary to provide consumers with appropriate information on washing and establish regulations for the use of harmful substances in newborn clothing and detergents.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.16 no.2
• /
• pp.161-164
• /
• 2018

The ingestion of corrosive substances often leads to severe morbidity and mortality. Acids produce coagulation necrosis with a lesser degree of penetration, whereas alkalis produce liquefactive necrosis with penetration. Acetic acid is a clear, colorless organic acid with a pungent, vinegar-like odor. The ingestion of highly concentrated acetic acid (glacial acetic acid) may cause a range of complications. On the other hand, perforation of the stomach is extremely rare but it has a high mortality rate. This paper reports a case of perforation of the stomach after the ingestion of glacial acetic acid with suicidal intent in an otherwise healthy 76-year-old woman.