• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.417-423
• /
• 2011

A series of new quinoxaline-based thiophene copolymers (PQx2T, PQx4T, and PQx6T) was synthesized via Yamamoto and Stille coupling reactions. The $M_ws$ of PQx2T, PQx4T, and PQx6T were found to be 20,000, 12,000, and 29,000, with polydispersity indices of 2.0, 1.2, and 1.1, respectively. The UV-visible absorption spectra of the polymers showed two distinct absorption peaks in the ranges 350 - 460 nm and 560 - 600 nm, which arose from the ${\pi}-{\pi}^*$ transition of oligothiophene units and intramolecular charge transfer (ICT) between a quinoxaline acceptor and thiophene donor. The HOMO levels of the polymer ranged from -5.37 to -5.17 eV and the LUMO levels ranged from -3.67 to -3.45 eV. The electrochemical bandgaps of PQx2T, PQx4T, and PQx6T were 1.70, 1.71, and 1.72 eV, respectively, thus yielding low bandgap behavior. PQx2T, PQx4T, and PQx6T had open circuit voltages of 0.58, 0.42, and 0.47 V, and short circuit current densities of 2.9, 5.29 and 9.05 mA/$cm^2$, respectively, when $PC_{71}BM$ was used as an acceptor. For the solar cells with PQx2T-PQx6T:$PC_{71}BM$ (1:3) blends, an increase in performance was observed in going from PQx2T to PQx6T. The power conversion efficiencies of PQx2T, PQx4T, and PQx6T devices were found to be 0.69%, 0.73%, and 1.80% under AM 1.5 G (100 mW/$cm^2$) illumination.

• 공업화학
• /
• 제18권1호
• /
• pp.77-83
• /
• 2007

2차 비선형 광학 소재는 광 도파로 응용을 위해 조화파 파장영역에서 낮은 광 진행 손실을 가져야 한다. 이를 위하여 분자에 전자 당김 작용기로 니트로기, 시안기 및 알킬슬폰기가 각각 도입된 세 가지의 쌍극자형 발색단 물질이 합성되었다. 시안기 및 슬폰기를 갖는 발색단의 자외-가시 흡수 스펙트럼은 니트로기를 갖는 발색단에 비해 단파장으로 이동하였다. 또한, 크로모포 분자에 옥사디아졸 연결기를 도입한 결과 광흡수 스펙트럼이 단파장으로 이동하는 유사한 특성을 관찰하였다. 이러한 단파장으로 이동하는 특성은 2차 조화파의 낮은 광손실을 유도할 것이다. 합성된 크로모포는 이미드 고분자에 곁사슬기 형태로 도입하였다. 합성된 고분자의 비선형 광학 성질은 $1.55{\mu}m$ 파장 영역에서 전기광학계수를 측정하고 변환을 통하여 결정하였다. 시차열량 분석계와 열중량 분석계를 이용하여 이들 고분자의 물성 측정을 진행한 결과 $185^{\circ}C$ 이상의 높은 유리전이 온도와 $300^{\circ}C$까지 열적으로 안정함을 보였다.

• 폴리머
• /
• 제32권1호
• /
• pp.13-18
• /
• 2008

전기 전자재료 중 고분자에 포함된 브롬계 난연제의 분석에 있어 용출이 어려운 4가지 재질 PC(polycar-bonate) PP(polypropylene), PET(poly(ethylene terephthalate)), PBT(poly(butylene terephthalate))에 대하여 추출방법 및 헥산/에세톤, THF, 톨루엔, THF/톨루엔에 대한 용매 특이성과 그 특성을 고찰하였다. 각 고분자에서의 deca-BDE(decabromo diphenyl ether)의 함량을 속슬렛, 초음파. 가속용매, 마이크로파, 초임계 유체 추출법을 사용하여 이들 방법의 효율을 정량분석 하였다. 초음파 추출은 낮은 고분자의 용해도 때문에 낮은 추출효율을 보여 사용한 고분자의 경우에 있어서 추출방법으로는 적합하지 않았으며, 나머지 3가지 방법에서는 톨루엔 사용시 약 80% 이상의 높은 추출효율을 보였다. 초임계 유체 추출은 고분자의 난연제 추출에 시도되지 않았던 방법이었으나, 본 실험에서 PP와 PC의 추출에서는 100%에 가까운 매우 높은 추출효율을 보였다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.40-40
• /
• 2010

Studies on attractive color changing property of dye chromophore and fluorophore have been greatly enjoyed in the related industrial and research fields such as optoelectronics, chemosensor, biosensor and so on. The optical property based on D-$\Pi$-A intramolecular charge transfer (ICT) system of chromophore molecules can be utilized as suitable sensing probes for checking media polarity and determining colorimetric chemosensing effect, especially heavy metal detection. These finding are obtained by absorption and emission properties. In this work, donor-acceptor D-$\Pi$-A type fluorescent dyes were designed and synthesized with the corresponding donor and acceptor groups. The selected donor moieties might be provided prominent amorphous properties which are very useful in designing and synthesizing functional polymers and in fabricating devices. Another reasons to choose are commercial availabilities in high purity and low price. Donor-bridge-acceptor (D-A) type dyes can produce impressive optical-physical properties, yielding them potentially suitable for applications in the synthesis of small functional organic molecules. Small organic functional molecules have unique advantages, such as better solubility, amorphous character, and represent an area of research which needs to be explored and developed. Currently, their applications in metalorganic compounds is rapidly expanding and becoming widespread in self-assembly processes, photoluminescence applications, chiral organocatalysts, and ingrafts with nanomaterials. Colloidal nanoparticles have received great attentions in recent years. The photophysical properties of nanoparticles, particularly in terms of brightness, photostability, emission color purity and broad adsorption range, are very attractive functions in many applications. To our knowledge background, colloidal nanoparticles have been enjoyed their applications in bio-probe research fields. This research interest can be raised by the advantages of the materials such as high photoluminescence quantum yields, sharp emission band, long-term photostability and broad excitation spectra. In recent, the uses of nanoparticles being embedded in a polymer matrix and binded on polymer surface have been explored and their properties such as photo-activation and strong photoluminescence have been proposed. The prepared chromophores and nanoparticles were investigated with absorption and emission properties, solvatochromic behaviors, pH induced color switching effects, chemosensing effects and HOMO/LUMO energy potentials with computer simulation. In addition, synthesized fluorophore dyes and particles were applied onto PE/Aramid fiber fluorescing colorations. And the related details were then discussed.

• Macromolecular Research
• /
• 제8권1호
• /
• pp.44-52
• /
• 2000

Styrenic macromonomers with/without a silyloxy-functional group were synthesizedvia chain-end functionalization using 4-vinylbenzyl chloride as a terminating agent insec-butyllithium-initiated polymerization of styrene. The yields were 92 mol% for the silyloxy group and 88 mol% for the styrenic unit. Crystalline polystyrene-g-amorphous polystyrenes were synthesized by (η$^{5}$ -indenyl)-trichlorotitanium ((Ind)TiCl$_3$)-catalyzed copolymerizations of the macromonomers with styrene in the presence of methyl-aluminoxane (MAO) in toluene at 4$0^{\circ}C$. The macromonomer having $\alpha$, $\alpha$'-bis (4-[tert-butyldimethylsilyl-oxy]phenyl) group was also utilized for the preparation of a precursor of hydroxyl-functionalized syndio-tactic polystyrene. The obtained polymers were characterized by a combination of$^1$H, $^{13}$ C NMR spectroscopic, size exclusion chromatographic, and differential scanning calorimetric analysis. The (Ind)TiCl$_3$-catalyzed copolymerization of styrene with the macromonomer carrying the silyloxy functional group was found to be an efficient method to modify syndiotactic polystyrene without a great loss of physica] property by controlling the feud ratio of the macromonomer.

• 폴리머
• /
• 제39권3호
• /
• pp.394-402
• /
• 2015

폴리아크릴로니트릴(PAN) 필름에 히드록실아민(HA)을 반응시켜 히드록시기와 아민기를 생성시키고, 히드라진으로 처리하여 가교결합을 도입시키는 방법을 검토하였다. HA와 히드라진을 각각 처리하거나 2단계 또는 동시 처리하여 개질시킨 PAN 시료들의 반응도, 물 및 N,N'-디메틸포름아미드(DMF) 팽윤도, FTIR 스펙트럼, 원소함량, 열분석 결과들을 분석하여 효율적으로 기능기와 가교결합을 도입시키는 방법을 제시하였다. PAN 필름은 HA와의 반응에 의해 기능기가 도입되고 친수성이 향상되지만 형태안정성이 감소하며, 히드라진 처리에 의해 DMF 팽윤도가 감소한다. 히드라진 및 HA를 2단계로 처리하면 형태안정성은 향상되지만 기능기 도입이 어려워지고, 히드라진과 HA를 동시에 처리하면 형태안정성과 친수성을 효율적으로 향상시킬 수 있다.

• 한국재료학회지
• /
• 제11권7호
• /
• pp.599-602
• /
• 2001

전도성 고분자인 poupyrrole과 polyaniline을 이용하여 센서를 제조하고 휘발성 유기화합물에 대한감응특성 및 감지막의 물성을 조사하여 지금까지 알려지지 않은 감응 기구를 설명하고자 하였다. Polypyrrole과 polyaniline은 두께가 얇은 경우가 두꺼운 경우보다 감도가 높았으며, 1분간 도펀트를 제거한 센서가 가장 높은 감도를 나타내었다. 또한 두 가지 센서 모두 극성이 강한 분자가 흡착될수록 감도가 증가하였는데, 이는 극성을 갖는 분자가 감지막 내부로 침투하여 polaron 및 자유 carrier를 고착시키거나 추가의 자유 carrier를 형성하여 전도도에 변화를 주기 때문인 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.176-183
• /
• 2020

이 연구에서는 작은 유기 분자 말단의 하이드록실기와 전이 금속 사이의 배위 결합을 통해 고분자와 유사하게 연결된 복합체를 제작하고, 점착 부여제를 추가하여 해당 물질의 점착제로의 사용 가능성을 확인하였다. 점착제 합성에 사용한 타닌산(tannic acid, TA)은 하이드록실기를 풍부하게 보유하고 있어 전이 금속과는 배위 결합이 가능하고 친수성 고분자와는 수소 결합이 가능하다. 위의 성질을 이용하여 타닌산과 전이 금속, 고분자 세 가지 성분을 한 번에 간단히 섞어 기판에 잘 펴지며 점착 능력을 보유한 특별한 유변 물성을 가지는 물질을 제작하였다. 합성에 사용한 전이 금속의 종류(Fe³⁺, Ti⁴⁺), 고분자의 종류, 처리 조건 등에 따른 유변 물성의 변화를 확인하는 과정을 통해 점착제로 사용하기에 가장 적합한 성분의 조합을 발견하였으며, 인체에 무해하며 높은 응집력과 접착력을 보유한 다목적 점착제로의 사용 가능성을 확인하였다.

• 한국식품위생안전성학회지
• /
• 제32권5호
• /
• pp.443-446
• /
• 2017

This study investigated the physical properties of polymers and antimicrobial activities of organic acids on Listeria monocytogenes to develop hydrogels. ${\kappa}-carrageenan$ (1, 2, and 3%), carboxymethylcellulose (CMC; 1, 3, and 5%), and agar (1.5 and 3%) were mixed with cross-linkers ($Na^+$, $K^+$, $Ca^{2+}$, and $Al^{3+}$) or each other by stirring or heating to form cross-linkage, and their physical properties (hardness, elasticity, and swelling) were measured. The hydrogels formulated with organic acid (1, 3, and 5%) were analyzed by spot assay against L. monocytogenes. ${\kappa}-carrageenan$ formed hydrogels with high hardness without other cross-linkers, but they had low elasticity. The elasticity was improved by mixing with other cross-linkers such as $K^+$ or other polymer, especially in 3% ${\kappa}-carrageenan$. CMC hydrogel was formed by adding cross-linkers $Al^{3+}$, $Na^+$, or $Ca^{2+}$, especially in 5% CMC. Thus, stickiness and swelling for selected hydrogel formulations (two of ${\kappa}-carrageenan$ hydrogels and three of CMC hydrogels) were measured. Among the selected hydrogels, most of them showed appropriate hardness, but only 3% ${\kappa}-carrageenan-contained$ hydrogels maintained their shapes from swelling. Hence, 3% ${\kappa}-carrageenan+0.2%$ KCl and 3% ${\kappa}-carrageenan+1%$ alginate+0.2% KCl+0.2% $CaCl_2$ were selected to be formulated with lactic acid, and showed antilisterial activity. These results indicate that 3% ${\kappa}-carrageenan$ hydrogels formulated with lactic acid can be used to control L. monocytogenes on food surface.

• Applied Microscopy
• /
• 제42권1호
• /
• pp.49-52
• /
• 2012

For TEM study of biological samples or polymers that are contained in organic structure, it is often required that the sample is prepared by using ultramicrotome and stained with proper agents to increase the contrast of organic structure. In this study, we investigated an efficient TEM sample preparation method for ductile heterogeneity material by using ultramicrotomy. Cryo-ultramicrotomy is a suitable method that is capable of rendering sample hardness for various ductile materials. However, it has several factors to consider, such as experimental cost, working time and finding the optimal staining conditions. To satisfy these considerations, we prepared TEM sample by using ultramicrotome without cryofunction, and secured the sample hardness by applying the staining process prior to ultrathin sectioning. The cross-linked polyethylene structure in the sample was stained with the 2% $RuO_4$ solution in a sealed test tube for 24 hours at $4^{\circ}C$. After the sample staining, ultrathin sections of sample were prepared using ultramicrotome. As a result, it was revealed that the difficulties associated with staining of ultrathin sections prepared by low-temperature conditions were improved. In addition, appropriate staining depth of sample could be selected for sectioning process. The quality of TEM sample obtained by using this method was better than that of cryo-ultramicroscopy. Finally, it is expected that our method could be effectively applied in TEM sample preparation for a variety of nano-bio convergence materials.