• Journal of Soil and Groundwater Environment
• /
• v.24 no.4
• /
• pp.11-19
• /
• 2019

This paper examines an assessment method for terminating the post-closure maintenance of a landfill using a simplified landfill gas model. The case study site is the Sudokwon Landfill in Incheon city, which was closed in 2000. The deviations of the results obtained by the regular model and the simplified model were both slightly over 10% from the measured data. Also, the deviation of the simplified model from the regular model has been less than 5% since 2005. Thus, the simplified model could be applied to other landfills that have been closed for at least 5 years. Additionally, the results of the mass balance analysis using the simplified landfill gas model indicated that 39% of the organic carbon was discharged, leading to organic carbon and organic matter content of 7.2 and 17.6%, respectively, in the landfill by the end of 2018.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.

• Journal of Korean Society on Water Environment
• /
• v.30 no.5
• /
• pp.512-516
• /
• 2014

Two different methods for TOC (Total Organic Carbon) analysis of livestock manure including high strength solid organics were evaluated. Firstly, an analyzing method by dilution after pre-treated by Ultrasonicator and 100 mesh sieve for homogenization was defined as TOC 1; and secondly method divided by particulate organic carbon (POC) and dissolved organic carbon (DOC) was defined as TOC 2. 116 samples collected from 56 farms were analyzed in TOC1, TOC2, BOD and VSS. TOC1 method showed higher accuracy at less than 30,000 mg/L of TOC while TOC2 method presented significant reliability at over that concentration. Regarding to the sample with the same VSS concentration, the correlation between TOC 2 and VSS (${\rho}$: 0.806) was slightly higher than that between TOC 1 and VSS (${\rho}$: 0.784), resulted from a relatively low loss of solids and a low error probability (dilution and homogenization effects) in the analyzing procedures. In addition, the reliability between POC and VSS in TOC2 was high and the POC was about 4.4 fold that of the VSS. Consequently, TOC 2 without dilution effect was assessed as a proper method to increase the analyzing accuracy of swine manure including high solid organics.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.855-863
• /
• 2021

The purpose of this study is to suggest an improvement plan for the National Technical Qualification Practical Evaluation focusing on National Competency Standards. First, in order to strengthen practical techniques such as field abilities and expertise, practical evaluation methods were applied to the National Competency Standards, referring to a learning module focused on field performance. Second, an expert advisory committee in the field of organic agriculture was utilized to compare, analyze, and match the competency unit and competency unit elements of the National Competency Standards with the national technical qualification examination standards in field of organic agriculture. In addition, in order to identify work in progress in the industrial field, share professional practice skills, and analyze facilities and equipment, we visited an organic agriculture industry site. Through this, a practical evaluation exam was developed. Subsequently, in order to confirm the adequacy of the developed exam, the pilot test assessment was conducted for those majoring in organic agriculture. Finally, as a feasibility study, a survey was conducted. Based on the results, greater technical job competency in the field of organic agriculture will contribute to strengthening knowledge in this field by suggesting an improvement plan for the national technical qualifications practical evaluation method in the field of organic agriculture.

• Electrical & Electronic Materials
• /
• v.10 no.1
• /
• pp.8-14
• /
• 1997

The UV/O$_{3}$ dry cleaning has been well known in removing organic molecules. The UV/O$_{3}$ dry cleaning method was performed to clean the Si wafer surfaces and contact holes contaminated by organic molecules such as residual PR. During the cleaning process, the Si surfaces were analyzed with X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and ellipsometer. When the UV/O$_{3}$ dry cleaning at 200'C was performed for 3 minutes, the residual photoresist was almost removed on Si wafer surfaces, but Si surfaces were oxidized. For UV/O$_{3}$ application of contact hole cleaning, the contact string were formed using the equipment of ISRC (Inter-university Semiconductor Research Center). Before Al deposition, UV/O$_{3}$ (at 200.deg. C) dry cleaning was performed for 3 minutes. After metal annealing, the specific contact resistivity was measured. Because UV/O$_{3}$ dry cleaning removed organic contaminants in contact holes, the specific contact resistivity decreased. Each contact hole size was different, but the specific contact resistivities were all much the same. Thus, it is expected that the UV/O$_{3}$ dry cleaning method will be useful method of removal of the organic contaminants at smaller contact hole cleaning.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.261-269
• /
• 2005

To investigate the field applicability of a diffusive sampler (3M OVM #3500, passive sampling method) authors conducted a simultaneous measurement of personal organic solvents exposure in the air of the workplaces by charcoal tube with low volume sampler (active sampling method) and diffusive sampler. Samples were collected and analyzed by NIOSH method ($NMAM^{(R)}$) from thirty-eight workers in 12 factories who work in 6 different processes. Geometric mean (GM) and geometric standard deviation (GSD) were used to describe the result. To compare the results of the two methods, paired t-test was used. According to the manual of the exposure assessment of the mixed organic solvents (Ministry of Labor, Korea), Em was calculated. Simple linear regression was used to evaluate the relationship between the two methods. Results were as follows; 1. Eight different solvents (ethyl acetate, n-hexane, toluene, xylene, acetone, isopropyl alcohol, methyl ethyl ketone (MEK), and methyl isobutyl ketone) were detected simultaneously in the two methods and the concentrations of the personal exposure were lower than 0.5 TLV level. The concentration of the charcoal tube method was higher than that of a diffusive sampler in n-hexane and MEK (p<0.05). 2. Em of the charcoal tube method was higher than that of diffusive sampler method but not significantly different and was lower than the OEL (Occupational Exposure Limit) in all 6 processes. 3. There was a significant correlation between the two methods in low concentrations of the 8 organic solvents (p<0.05). In conclusion, there was no difference in charcoal tube method and diffusive sampler method in low concentrations of some organic solvents, diffusive sampler can be applied to assess the personal monitoring in low level exposure.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.91-98
• /
• 2011

In this thesis, from the results of settlement measurement performed at the site where embankment earthwork was carried out on the ground consisting of highly plastic and silty soft soils interlayered with organic deposits, various methods of predicting the embankment settlement such as Hoshino's method, Asaoka's method, hyperbolic method, ${\sqrt{s}}$ method and Monden's method were used to investigate their applicability and the inverse method of finding the soil parameter related to consolidation was used to predict the consolidation behavior in the future. It was confirmed that reliable prediction of consolidation behavior under various conditions could be done to estimate soil parameter related to consolidation such as the consolidation index and consolidation coefficient by the inverse method of comparing the measured settlement with the predicted value by the settlement prediction methods.

• YAKHAK HOEJI
• /
• v.22 no.3
• /
• pp.157-162
• /
• 1978

Total organic carbon(TOC) can be determined by means of combustion and flame ionization detector. The principle of string method is that a sample acidified to pH2 and transferred into combustion tube by string is oxidized with air. Another combustion tube method is that organic compounds are oxidized in the combustion tube charged with CuO and cobalt asbestos after the acidified sample is injected directly by microsyringe. Carbon dioxide evolved was reduced under specially treated nickel catalyst and hydrogen, the methane produced was detected by flame ionization detector. Linear relationship was found between concentration and the peak height by the string method. The peak area in the case of combustion tube method is in the range of 1-200ppm. The coefficient of variation by string method was 2.3% and that by combustion tube method was 1.8%. The lower detectable limit was about 10mol. Advantages of the latter are simplicity, sensitivity and reproducibility. TOC in contineous stream can also be determined automatically by means of the string method.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.7-12
• /
• 2003

The heat of combustion is one of the major physical properties used to determine the fire and explosion hazards of the flammable substances. Empirical equations have been developed to pre-dict the net heats of combustion of organic halogenated compounds based on the atomic contribution method. The method developed in this study was compared with Cardozo's method and Hanley's method. As can be seen from the average absolute deviation(A.A.D.), the proposed equation was found to be best. The proposed equation may serve as an estimation scheme for the heats of combustion of the other organic halogenated compounds.

• Korean Journal of Organic Agriculture
• /
• v.4 no.2
• /
• pp.97-136
• /
• 1995

Recendtly an organic agricultured in Korea is getting a public attention not only for minimizing NO3- contamination of groundwater but also for producing of quility of agricultural products. But still there is not Basic Standards for Organic Agriculture in Korea and Japan since they just believe organic agriculture is one kind of the environmental friendly sustainable agriculture as written in western literature. In the paper it was discussed the core skills and doctrine of IFOAM Basic Standards compare to Korean Organic Farming Method in oder to point out thed disadvantages of overuse of organic fertilizer, 50-150MT/㏊ in each cultivation, intensive monocropping in glass-house without any rotation & legume, and without any green manure. Most korean or-ganic farmer believe that the more they apply organic fertilizer, the better they pro-duce high quility of crops and they practise organic agriculture completely. It was also suggested the overuse of organic fertilizer cause the accumulation of NO3- in rhizosphere and subsequently it might lead to drinkwater pollution by nitrate leaching. In conclusion it is suggested that for successful establishment of organic agriculture, The Association of Korean Organic Agriculture, The Society of Korean Organic Agri-culture and the certification body should be developed the Basic Standards which is acceptable by IFOAM Basic Standards.