• 제목/요약/키워드: organic membrane

검색결과 856건 처리시간 0.027초

플라즈마 중합박막을 이용한 유기용매의 투과증발 (Pervaporation of Organic Solvents using Plasma Polymerized Thin Film)

  • 김성오;박복기;김두석;박진교;류성렬;이진;나동근;이덕출
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 D
    • /
    • pp.1702-1703
    • /
    • 1999
  • We have prepared the plasma-polymerized membrane for pervaporation of organic-liquid mixtures by the plasma polymerization technique. Plasma polymerization techniques were utilized in the development of hydrophilic composite membranes having high hydrogen ion permeability and excellent dimensional stability. To develop an organic liquid permselective membrane. suppressing membrane swelling as well as enhancing the solubility difference is important, the objectives of the present study are to design a suitable membrane for an organic-mixture system by the control of the plasma-polymer solubility.

  • PDF

Application of Membranes for Organic Liquid or Vapor Separation and Design of Plasma-Graft Filling-Polymerized Membranes

  • Yamaguchi, Takeo;Nakao, Shin-ichi
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1996년도 추계 총회 및 학술발표회
    • /
    • pp.34-39
    • /
    • 1996
  • There is much recent interests in applying membrane separation technologies, especially for organic liquid and vapor separation or removing dissolved organics from water. Pervaporation separation can separate azeotropic mixtures and mixtures close to boiling point, and it has a potential for energy saving process instead of distillation. Removal of chlorinated oraganics from water is other measure application for pervaporation separation. Contaminated pollutant must be removed from water, and a pervaporation can effectively remove the pollutant. Air pollution by organic vapor recently became serious enviromncntal problem, and removing organic vapor from air is important application of the membrane technology.

  • PDF

Preparation and Characterization of Crosslinked Sodium Alginate Membranes for the Dehydration of Organic Solvents

  • Goo, Hyung Seo;Kim, In Ho;Rhim, Ji Won;Golemme, Giovanni;Muzzalupo, Rita;Drioli, Enrico;Nam, SangYong
    • Korean Membrane Journal
    • /
    • 제6권1호
    • /
    • pp.55-60
    • /
    • 2004
  • In recent years, an increasing interest in membrane technology has been observed in chemical and environmental industry. Membrane technology has advantages of low cost, energy saving and environmental clean technology comparing to conventional separation processes. Pervaporation is one of new advanced membrane technology applied for separation of azeotropic mixtures, aqueous organic mixtures, organic solvent and petrochemical mixtures. Sodium alginate composite membranes were prepared for the enhancement of long-term stability of pervaporation performance of water-ethanol mixture using pervaporation. Sodium alginate membranes were crosslinked with CaCl$_2$ and coated with polyelectrolyte chitosan to protect washing out of calcium ions from the polymer. The surface structures of PAN and hydrolysed PAN membrane were confirmed by ATR Fourier transform infrared (FT-IR). A field emission scanning electron microscopy (FE-SEM; Jeol 6340F) operated at 15 kV. Concentration profiles for Ca in the membrane surface and membrane cross-section were taken by an energy dispersive X-ray (EDX) analyser (Jeol) attached to the field emission scanning electron microscopy (Jeol 6340F). Pervaporation experiments were done with several operation run times to investigate long-term stability of the membranes.

MEMBRANE PROCESSES IN ENVIRONMENTAL TECHNOLOGY

  • Blume, I.;Smolders, C.A.
    • 멤브레인
    • /
    • 제2권1호
    • /
    • pp.1-20
    • /
    • 1992
  • Classical membrane processes like microfiltration (MF), ultrafiltration (UF) and reverse osmosis (RO) are being applied in the last years more frequently in environmental and effluent process problems. Newer technologies and developments like pervaporation (PV) and gas sepaxation (GS) recently found commercial applications in the treatment of waste waters and gas streams. The incentive here is either the clean-up from organic components to comply with federal emission regulations or the recovery of the organics for economical reasons. Processes still in their development stage are combinations of chemical reactions with membrane processes to separate and treat $SO_x$ and $NO_x$ laden waste gas streams in the clean-up of stack-gases. In this paper we will first give a short overview of the more recent developments in MF, UF and RO. This is followed by a closer look on newer technologies applied in environmental problems. The applications looked at are the recovery of organic components from solvent laden gas streams and the separation of organic volatiles from aqueous waste waters via pervaporation. Technical solutions, the advantages and disadvantages of the processes and. where possible, cost estimations will be presented.

  • PDF

Effect of Cadmium on Organic Acid Transport System in Renal Basolateral Membrane

  • Kim, Ghi-Chan;Kim, Kyoung-Ryong;Kim, Jee-Yeun;Park, Yang-Saeng
    • The Korean Journal of Physiology
    • /
    • 제30권2호
    • /
    • pp.279-288
    • /
    • 1996
  • Chronic exposure to cadmium impairs various renal tubular functions, including organic acid (anion) secretion. To investigate the mechanism of cadmium-induced alterations in the organic anion transport system, kinetics of p-aminohippurate (PAH) uptake was studied in renal cortical basolateral membrane vesicles (BLMV) isolated from cadmium-intoxicated rats (adult male Sprague-Dawley). Cadmium intoxication was induced by subcutaneous injections of $CdCl_{2}$ (2 mg Cd/kg per day) for 3 weeks. The renal plasma membrane vesicles were prepared by Percoll gradient centrifugation. The vesicular uptake of $^{14}C$-PAH was determined by rapid filtration technique using Millipore filter. Cadmium intoxication resulted in a marked attenuation of $Na^{+}$-dependent, ${\alpha}$-ketoglutarate (${\alpha}$KG)-driven PAH uptake with no changes in $Na^{+}$ and ${\alpha}$KG-independent transport component. Kinetic analysis indicated that Vmax, but not Km, of the $Na^{+}$-dependent, ${\alpha}$KG-driven component was reduced. A similar reduction of $Na^{+}$-dependent, ${\alpha}$KG-driven PAH uptake was observed in normal membrane vesicles directly exposed to inorganic cadmium in vitro, and this was accompanied by an inhibition of both $Na^{+}$-dependent ${\alpha}$KG uptake and ${\alpha}$KG-PAH exchange activity. These results indicate that during chronic exposure to cadmium, free cadmium ions liberated in the proximal tubular cytoplasm directly interact with the basolateral membrane and impair the active transport capacity for organic anions, most likely due to an inhibition of both $Na^{+}$-dicarboxylate cotransporter and dicarboxylate-organic anion antiporter activities.

  • PDF

소수성막을 이용한 금속추출 및 물질전달에 관한 연구 (A Study on the Mass Transfer and Metal Extraction by use of Hydrophobic Membrane)

  • 이용진;김영일;박동원
    • 공업화학
    • /
    • 제9권7호
    • /
    • pp.1036-1042
    • /
    • 1998
  • 소수성실관막을 이용하여 수용액 중의 Cr(VI)을 TDA로 추출하고, 이를 NaOH 수용액으로 회수하였다. 역추출공정에서의 물질전달속도는 추출공정에 비해 작았으며, 이러한 결과는 소수성막의 내부를 유기상이 흐르게 되면 추출과정에서는 무시할 수 있었던 막저항이 작용하기 때문이라 판단된다. 막수량을 달리한 4개의 막모듈(60, 100, 150, 300가닥)을 제작하였으며, 각 모듈에 대해 수용상 및 유기상의 유량이 물질전달속도에 미치는 영향에 대해서도 검토하였다. 이 실험으로부터 소수성막을 이용한 추출공정에서는, 막내부를 흐르는 수용상의 유량이 물질전달속도에 큰 영향을 주었으나 유기상 유량의 영향은 미약하다는 것을 알 수 있었다. 반면, 역추출공정에서의 물질전달속도는 수용상(회수액)유량에도 유기상(Cr-TDA 착화합물)의 유량에도 영향을 받지 않음을 알 수 있었다.

  • PDF

바이폴라막 전기투석에 의한 유기산 회수에 관한 모델링 (Modeling for the Recovery of Organic Acid by Bipolar Membrane Electrodialysis)

  • 김상헌;이병철
    • Korean Chemical Engineering Research
    • /
    • 제44권5호
    • /
    • pp.476-482
    • /
    • 2006
  • 본 연구에서는 유기산염으로부터 유기산으로의 변환을 2실 배열 공정의 바이폴라막 전기투석을 이용하여 행하였다. 유기산으로 아세트산과 젖산을 사용하였으며, 유기산의 농도, 가성소다의 농도 그리고 pH 값들을 전류밀도에 따라 측정하였다. 그 결과 유기산염은 효과적으로 유기산으로 전환되었을 뿐만 아니라, 잔여 $Na^+$ 이온을 수산화나트륨의 형태로 회수할 수 있었다. 실험 결과를 바탕으로 이온 평형을 고려하여 수학적인 모델을 확립하였다. 시간에 따른 유기산의 농도, 가성소다의 농도 그리고 pH 값의 모델식은 실험 데이터와 잘 일치하였다.

오염물질 분해를 위한 광촉매 분리막: 총설 (Photocatalytic Membrane for Contaminants Degradation: A Review)

  • 라비아 카갛니;라즈쿠마 파텔;김종학
    • 멤브레인
    • /
    • 제32권1호
    • /
    • pp.33-42
    • /
    • 2022
  • 성장하는 산업화는 심각한 수질 오염으로 이어진다. 폐수로 배출되는 약품과 섬유산업에서 나오는 유기배출물은 환경과 생명에게 악영향을 미친다. 항균치료에 사용되는 항생제가 폐수에 존재하면 인체에 매우 해로운 약제 내성균의 성장을 야기하게 된다. 섬유산업에서 사용되는 유기염료 분자의 제조에는 다양한 유기 저분자가 사용된다. 이러한 분자들은 인쇄 및 염색 산업의 폐수 배출물에 존재하여 분해가 잘 이루지지 않는다. 이러한 문제들을 해결하기 위해 광분해성 촉매를 분리막에 도입하고 폐수를 처리한다. 이 과정을 통해 유기 분자는 광분해되며 동시에 분해된 화합물들은 분리막을 통과하여 분리된다. 이산화티타늄(TiO2)은 뛰어난 광촉매 역할을 하는 반도체이다. 다른 전이 금속 산화물과 화합물을 만들고 고분자 막에 도입하여 광촉매 능력을 증가시킨다. 본 총설에서는 광촉매성 분리막에 의한 염료 및 약물 분자의 분해에 대해 논의한다.

막의 재질에 따른 막오염 특성 및 물리·화학적 세척의 영향 (Effect of Membrane Materials on Membrane Fouling and Membrane Washing)

  • 심현술;정철우;손희종;손인식
    • Korean Chemical Engineering Research
    • /
    • 제45권5호
    • /
    • pp.500-505
    • /
    • 2007
  • 본 연구에서는 막의 재질에 따른 막오염 특성과 물리 화학적 세척에 대한 영향을 살펴보았다. 막의 재질에 대한 막오염 특성을 조사하기 위하여 정적흡착실험과 일정 압력하에서 흡착실험을 병행하여 실험을 수행하였다. UF 막의 재질특성에 따른 정적흡착 실험값을 회귀분석한 결과, 소수성과 친수성 유기물질의 시간에 따른 흡착 특성은 소수성 재질의 막이 친수성 재질의 막보다 빠른 흡착특성을 보였다. 막의 재질에 따른 유기물 성상별 흡착실험 결과, 막의 재질에 상관없이 소수성 유기물질의 흡착율이 친수성 유기물질보다 더 빠른 흡착율을 보였다. 또한 막의 표면과 공극속에서 발생하는 유기물의 흡착 특성을 살펴보기 위하여 일정한 압력하에서 시간에 따른 흡착 특성을 살펴본 결과 정적흡착실험 결과와 유사하게 친수성 재질의 막보다 소수성 재질의 막에서 더 빠른 흡착율을 보이고 있다. 막에 재질에 따른 흡착실험 후 투과 flux 변화와 flux 회복율에 대한 실험결과, 친수성 재질의 막의 경우 소수성 재질의 막에 비하여 투과 flux 감소율은 낮게 나타났으며 물리 화학적 세척의 영향에서도 물리적인 세척후 효과적인 회복율을 나타내었으며 화학적인 세척의 영향은 거의 없었다. 친수성 재질의 막의 경우 막자체의 고유저항(Rm)이 크게 나타나고 있으며 소수성 재질의 막의 경우 케이크에 의한 저항과 물리 화학적 세척에도 회복되지 않는 비가역적 저항이 크게 나타나고 있다. 따라서 친수성 재질의 막의 경우 막표면 오염이 주가 되며 소수성 재질의 막의 경우 막표면 오염과 공극 오염이 동시에 발생함을 알 수 있었다.

PET 나노섬유 강화 PEI 막의 제조 및 특성화 연구, 그에 따른 유기용매 나노여과막 가능성 검증 (Preparation and Characterization Study of PET Nanofiber-reinforced PEI Membrane, Investigation of the Application of Organic Solvent Nanofiltration Membrane)

  • 홍성배;임광섭;권동준;남상용
    • 접착 및 계면
    • /
    • 제24권1호
    • /
    • pp.17-25
    • /
    • 2023
  • 본 연구는 투명 폐 Polyethylene Terephthalate (PET)병을 재활용하여 지지체를 제조 후에 Polyetherimide (PEI)를 이용하여 친환경적인 유기용매나노여과막 (Organic Solvent Nanofiltration)에 이용하고자 하였다. 제조된 복합막은 먼저, PET 지지체는 전기방사를 통해 제조를 하였으며 이후 내용매성이 우수한 PEI를 이용하여 지지체 위에 캐스팅하였고 비용매 유도상분리(Non-solvent Induced Phase Separation, NIPS) 방법을 이용하여 유기용매나노여과막을 제조하였다. 먼저 막제조에 앞서 제조된 PET 지지체는 모폴로지 분석을 통해 섬유의 직경과 인장강도를 파악하였으며 유기용매나노여과막의 최적 지지체 조건을 확인하였다. 이후 제조된 PET/PEI 복합막은 PEI의 농도에 따른 유기용매나노여과막으로서의 성능을 파악하기 위하여 에탄올에 분자량 697 g/mol을 가지는 Congo red의 제거율을 확인하였으며 최종으로 Congo red의 제거율이 90%이상의 제거율을 가지는 최적의 PET/PEI 복합막을 확인하였다.