• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.105-110
• /
• 2006

The highly integrated nature of polymer based organic light emitting diode (POLED) microdisplay technology, coupled with low voltage and low power electroluminescent light generation, combine to offer a very promising technology for use in portable and personal electronics products. We briefly describe the technology before discussing how to engineer the color gamut using whiteemitting polymer materials, microcavity device structure and color filter absorbance.

• 센서학회지
• /
• 제30권5호
• /
• pp.309-313
• /
• 2021

Organic semiconductors have received tremendous attention for their research because of their tunable electrical and optical properties that can be achieved by changing their molecular structure. However, organic materials are inherently unstable in the presence of oxygen and moisture. Therefore, it is necessary to develop moisture and air stable semiconducting materials that can replace conventional organic semiconductors. In this study, we developed a NiO_x thin film through a solution process. The electrical characteristics of the NiO_x thin film, depending on the thermal annealing temperature and UV-ozone treatment, were determined by applying them to the hole injection layer of an organic light-emitting diode. A high annealing temperature of 500 ℃ and UV-ozone treatment enhanced the conductivity of the NiO_x thin films. The optimized NiO_x exhibited beneficial hole injection properties comparable those of 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN), a conventional organic hole injection layer. As a result, both devices exhibited similar power efficiencies and the comparable electroluminescent spectra. We believe that NiO_x could be a potential solution which can provide robustness to conventional organic semiconductors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.282-283
• /
• 2009

In the research, we have proposed a novel encapsulation with simple process and steady film for external environment in comparison with conventional encapsulation method. This was designed to cover the emitting organic material from air. Silicon 야oxide was used for thin film of encapsulation and the deposition thickness of the organic film was 220 nm. Operating voltage of green OLED with encapsulation was 5.5 V and luminance was 7.370 cd/$m^2$ at the applied voltage of 14.5 V. Luminance was measured in 10 hour intervals at the air-exposed condition. After 110 hours and 300 hours, luminances of green OLED were 7,368 and 7,367 cd/$m^2$, respectively. Luminance of green JLED doesn't decrease until 300 hours. As a results, proposed encapsulation can increase the life time of green OLED.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.827-834
• /
• 2010

발광층에 도펀트가 도핑된 다층 유기발광다이오드 소자 구조에서의 발광 메카니즘을 검증하기 위해 전기적인 특성요인들을 수치해석 하였다. 본 논문에 적용한 유기발광다이오드 소자는 ITO/NPB/$Alq_3$:C545T(%)/$Alq_3$/LiF/Al으로 이루어져 있으며 도펀트인 C545T의 도핑 농도를 변화시킨 4종류의 소자 구조에 대해 특성 변화를 검토하였다. 그 결과 도펀트의 도핑 농도 변화에 따라서 전압-전류 특성이 변화되어짐을 확인하였고, 이는 참고 문헌에 제시되어 있는 전압-전류밀도 실험 데이터와 매우 잘 일치되었다. 또한 도펀트를 도핑시킨 소자 구조들에서 전압-휘도 특성이 대폭 향상되어 발광효율이 3배정도 향상되었다. 이와 같은 guest-host system이 적용된 유기발광다이오드 소자의 동작 메카니즘을 분석하기 위하여 소자 내부에서의 전계분포, 전하분포, 재결합율 등의 전기적인 항목들에 대한 특성의 변화를 관찰하였다.

• Journal of Information Display
• /
• 제13권2호
• /
• pp.67-71
• /
• 2012

In today's mobile world, small and lightweight information systems are becoming increasingly important. Microdisplays are the base for several near-to-eye display devices. The addition of an integrated image sensor significantly boosts the range of applications. This paper describes the base-building block for these systems: the bidirectional organic light-emitting diode microdisplay. A small and lightweight optic design, an eye-tracking algorithm, and interaction concepts are also presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.742-745
• /
• 2004

A profitable mass production of Organic Light Emitting Diode (OLED) displays needs a new type of manufacturing equipment. We have developed a vertical In-Line machine (VES400) equipped with linear etch sources (e.g. to activate an ITO layer), standard magnetron sputter sources for ITO and metal and linear evaporation sources for the organic and metal materials. We present new results concerning the linear evaporation sources for organic materials. We have optimized the vertical thickness non uniformity for the evaporation of different organic materials and achieved deviations of less than ${\pm}$ 5 % for the vertical thickness over a substrate height of 400 mm. We will further report first results about the long term stability of the deposition rate for different organic materials using rate control..

• Journal of Information Display
• /
• 제7권1호
• /
• pp.35-40
• /
• 2006

Organic light-emitting diode (OLED) display panel using the charge-pump (CP) pixel addressing scheme was fabricated, and the results show that it is applicable for information display. A CP-OLED panel with 64 ${\times}$ 64 pixels consisting of thin-film capacitors and amorphous silicon Schottky diodes was fabricated using conventional thin-film processes. The pixel drive circuit passes electrical current into the OLED cell during most of the frame period as in the thin-film transistor (TFT)-based active-matrix (AM) OLED displays. In this study, the panel was operated at a voltage level of below 4 V, and this operation voltage can be reduced by eliminating the overlap capacitance between the column bus line and the common electrode.

• ETRI Journal
• /
• 제36권5호
• /
• pp.847-855
• /
• 2014

We developed a highly refractive index planarization layer showing a very smooth surface for organic light-emitting diode (OLED) light extraction, and we successfully prepared a highly efficient white OLED device with an embossed nano-structure and highly refractive index planarization layers. White OLEDs act as an internal out-coupling layer. We used a spin-coating method and two types of $TiO_2$ solutions for a planarization of the embossed nano-structure on a glass substrate. The first $TiO_2$ solution was $TiO_2$ sol, which consists of $TiO_2$ colloidal particles in an acidic aqueous solution and several organic additives. The second solution was an organic and inorganic hybrid solution of $TiO_2$. The surface roughness ($R_a$) and refractive index of the $TiO_2$ planarization films on a flat glass were 0.4 nm and 2.0 at 550 nm, respectively. The J-V characteristics of the OLED including the embossed nano-structure and the $TiO_2$ planarization film were almost the same as those of an OLED with a flat glass, and the luminous efficacy of the aforementioned OLED was enhanced by 34% compared to that of an OLED with a flat glass.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.60-64
• /
• 2003

In this study, the inorganic thin-film passivation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam evaporation system, the various kinds of inorganic thin-films were deposited onto the organic layer and their interface properties between organic and inorganic layer were investigated. In this investigation, the MgO layer showed the most suitable properties, and based on this result, the time dependent emission properties were estimated for the OLED with and without passivation layer. In this experiment, we can see that the time-dependent emission properties of MgO passivated OLED had longer life-time compared to non-passivated OLED. Therefore, we can consider that the MgO thin film is one of the most suitable candidates for the thin-film passivation layer of OLED.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.515-518
• /
• 2008

Organic light emitting diode(OLED) is one of the most promising type of future flat panel display. A linear source is used to deposite organic vapor to a large size OLED substrate. An electric heater which is attached on the side of linear source heats the organic powder for the sublimation. The nozzle of heater, which is attached at the top of the linear source has an optimal temperature. An numerical analysis has been performed to find optimal heater position for the optimal nozzle temperature. A commercial CFD program, FLUENT, is used on the analysis. Two-dimensional and three-dimensional analysis have been performed. The analysis showed that the heater should be attached at the outer side of crucible wall rather than inner side of housing, which was original design. Eighteen milimeter from the top of the linear source was suggested as the optimal position of heater. Improving thermal performance of linear source not only helps the uniformity of organic vapor deposition on the substrate but also increase productibity of vapor deposition process.