• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.49-50
• /
• 2010

The near-infrared absorbing donor-acceptor chromophores have been investigated by varying the electron donating and accepting molecular moiety. A series of near-infrared absorbing chromophores were offered narrow and intense absorption band in a various organic solvents. The dyes synthesised were, however, strongly bathochromic shift which extended well into the near-infrared region. The functional uses of dyes are vast in number, and it is convenient to classify them in some way. In all cases, it is the $\Pi$-chromophore that plays a major role in the functional application. "Light absorption" is of course the most commonly used property of a dye chromophore, and it can be employed directly, e.g. in light filters and optical data recording, or it can be used to drive further functional processes, e.g. fluorescence, photochromism, photosensitization.

• 한국전기전자재료학회논문지
• /
• 제26권7호
• /
• pp.528-533
• /
• 2013

We focused on the development of red azo colorants with high thermal stability and good solubility for LCD color filter in this research. For the synthesis of hybrid azo colorants, we used the couplers of aniline, naphthol and benzoimidazol functional group. The synthesized hybrid azo colorants were charaterized by using NMR, UV/visible spectroscopy, FT-IR, EA and TGA. They represented the maximum absorption wavelengths which are longer than 500 nm in UV/visible spectrum. So they were confirmed to be suitable for red colorants of LCD color filter. Azo compound (1a, 1b) with aniline functional group had good solubility in organic solvents such as acetone, methanol, chloroform and PGMEA. Moreover azo compounds (1c, 1d and 1e) with naphthol and benzoimidazolone functional group gave excellent thermal stability higher than $250^{\circ}C$ in TGA thermograms.

• 멤브레인
• /
• 제7권4호
• /
• pp.175-182
• /
• 1997

혐기-호기의 생물반응조 공정과 막분리 공정을 조합한 막-생물반응조 공정을 이용하여 염색폐수 중의 난분해성 물질들을 제거하였다. 염색폐수 원수를 직접 막분리공정에 적용한 결과 심각한 fouling을 초래하였다. 반면 생물반응조로 1차 처리한 후 막분리공정에 적용한 경우 생물반응조가 막의 오염원을 상당부분 제거하여 fouling현상이 현저리 감소하였으며, 막의 수명도 연장시킬 수 있었다. 염색폐수의 처리효율 및 fouling현상은 막의 기공 크기나 구조보다는 막의 재질에 더욱 의존함을 확인하였다. 중공사막 module의 사용 방법 및 중공사막 내부의 유속에 따라서 제거효율 및 투과유량이 변화하였다. 생물반응조나 막분리 단독공정보다 두공정을 조합한 공정이 보다 효과적으로 염색폐수 처리능력을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.310-310
• /
• 2010

Electronic and photovoltaic characteristics of two sensitizers (TA-BTD-CA and TA-BTD-St-CA), composed of a different $\pi$-conjugation in the linker group, have been investigated by theoretical and experimental methods. The electronic structure, transition dipole moment and oscillator strengths of two sensitizers have been scrutinized by using density functional theory (DFT) and time-dependent DFT (TD-DFT) method. The LUMO level and the oscillator strength of TA-BTD-St-CA was higher than that of TA-BTD-CA, which may facilitate the electron injection process as well as increase the absorption coefficient. The relative efficiencies of the electron injection from the excited sensitizer to nanocrystalline TiO2 and SnO2 films have also been investigated by nanosecond transient absorption spectroscopy. The relative electron injection efficiency of TA-BTD-St-CA exhibited similar injection efficiency for two different semiconductors. However, in the case of TA-BTD-CA sensitizer, electron injection into SnO2 was approximately three times larger than that into TiO2. This enhancement of electron injection of TA-BTD-CA for the SnO2 is due to the increment of the driving force caused by positive shift of conduction band of semiconductor, which was also confirmed from the investigation for the photovoltaic characteristics according to the electrolyte additive, such as LiI additive.

• 한국산업융합학회 논문집
• /
• 제9권2호
• /
• pp.111-116
• /
• 2006

This study provides the optimal conditions treating with the coagulation process and the other chemical treatment processes for dyeing wastewater, especially various dyeing complex wastewater. The results are shown as follows: 1. Optimum reaction condition of pH for ferrous sulfate was the range of 9 to 12. And when 3,000ppm(mg/l) of ferrous sulfate was dosed, the maximum $COD_{Mn}$ removal rate was approximately 40%. 2. In case of ferrous chloride and Bittern as coagulants, optimum pH range was 10 to 11. And maximum $COD_{Mn}$ removal rate was approximately 46% to 50% for dose of 2,000ppm(mg/l) to 6,000 ppm. 3. It is confirmed that the activated sludge process following coagulation precipitation method provides better treatment efficiency than the coagulation precipitation method following the activated sludge process. 4. The purpose of this study was to produce CGF (Cyanoguanidineformaldehyde resin) by organic compounds. 5. The complex coagulation agent by this study is the most economical coagulant with Alum(aluminum sulfate) and the removal efficiency is approximately 54% with 1,000ppm(mg/l) of pH range 6 to 7.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.406-415
• /
• 2018

Here, as-synthesized $Fe_3O_4$ nanoparticles were incorporated into the zeolitic imidazolate framework (ZIF-8) lattice to activate sodium percarbonate (SPC) for degradation of methylene blue (MB). The reaction rate constant of $Fe_3O_4@ZIF-8/SPC$ process ($0.0632min^{-1}$) at acidic conditions (pH = 3) was more than six times that of the $Fe_3O_4/SPC$ system ($0.009min^{-1}$). Decreasing the solute concentration, along with increasing SPC concentration and $Fe_3O_4@ZIF-8$ nanocomposite (NC) dosage, favored the catalytic degradation of MB. The $Fe_3O_4@ZIF-8$ NC after fifteen consecutive treatment processes showed the excellent stability with a negligible drop in the efficiency of the system (<10%). The reaction pathway was obtained via GC-MS analysis.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.373-379
• /
• 2019

One of the real issues of the recent years is water contamination because of harmful synthetic dyes. Liquid Membranes (LM) resemble a promising alternative to the current separation processes, demonstrating various points of interest as far as effectiveness, selectivity, and operational expenses. The improvement of various Liquid Membranes designs has been a matter of examination by few researchers, particularly for the expulsion of dyes from aqueous solutions. The choice of organic surfactants plays an essential role in the efficiency of the dye removal. In LM design, the most significant step towards productivity is the decision of the surfactant type and its concentration. Liquid emulsion membrane (LEM) was used to remove safranin from aqueous solutions in which the emulsion was made with the help of D2EHPA as carrier, kerosene was used as a diluent and Span 80 (Sorbiton monooleate) was used as an emulsifying agent or surfactant. Various sorts of internal stages were utilized, to be specific sulphuric acid and sodium hydroxide. The impact of parameters influencing extraction efficiency such as pH of feed solution, concentrations of surfactant and emulsifying agent in membrane phase, volume ratio of internal phase to membrane phase, internal phase concentration, agitation speed and time of extraction were analyzed.

• 복식문화연구
• /
• 제31권2호
• /
• pp.248-261
• /
• 2023

The conditions for minimizing dyes and additives when dyeing cellulose fibers such as linen, ramie, and hemp fabrics were obtained using glucose, an organic reducing agent. Dyeability and colorfastness were measured through repeated dyeing. The overall surface dyeing concentration followed the linen>hemp>ramie order, and most of the colors were in the range of PB (PurpleBlue). As the glucose concentration increased, the blue series was strengthened, and the color was dark and clear. It was determined that glucose the concentration of 4g/L was appropriate for minimizing the amount of dye. When the dyeing temperature was 30℃, the surface dyeing concentration was the highest, and the color was dark and clear. Although the dyeing concentration increased as NaOH concentration increased, 3g/L (pH 12.37) was considered appropriate for the minimum NaOH concentration, which becomes gradual after the dyeing concentration increased rapidly. It was found that the surface dyeing concentration, when repeated six times for 5 min, was better than that of dyeing once for 30 min. Washing, rubbing, and perspiration colorfastness were all found to be excellent in grades 4-4-5, and colorfastness to light was excellent in grades 5 of linen and hemp and grade 4 of ramie.

• 접착 및 계면
• /
• 제13권3호
• /
• pp.131-136
• /
• 2012

본 연구에서는 LCD 편광필름 제조용으로 시판되고 있는 poly(vinyl alcohol) (PVA) 필름을 반응성 이색성 염료로 염착시키고 500%로 일축 연신시킨 후 그 편광효율 및 투과도를 측정하였다. 이때 3,5-dichloro-2,4,6-triazine 잔기를 갖는 반응성 이색성 염료를 합성한 후 강염기성 수용액이 아닌 중성 유기 용매를 사용하여 염착을 수행하였다. 먼저, 시판되고 있는 편광필름용 PVA 필름의 검화도를 조사하였다. 이를 위해 시약급 PVA 분말시료의 검화도를 NMR 분광분석법을 사용하여 검정한 후, 필름을 제막하여 FT-IR 분광분석법으로 C-H기와 C=O기의 신축진동에 대한 흡광도 비를 측정하여 NMR 분광분석법으로 결정된 검화도와 상관시켜 봄으로써 상용화된 PVA 필름의 검화도를 in situ로 가늠할 수 있었다. 다음으로, NMR 분광분석법으로 검화도가 약 100%로 결정된 시판 PVA 필름을 두 가지 반응성 이색성 염료를 사용하여 염착하였다. 결과로서, 반응성 콩고레드를 염착시켜 제조한 PVA 편광필름과 반응성 다이렉트블랙 22를 염착시켜 제조한 PVA 편광필름의 광학특성을 비교할 때, 전자의 경우 편광효율이 우수하며, 후자의 경우 투과도가 우수함을 알 수 있었다.

• 한국식품과학회지
• /
• 제43권2호
• /
• pp.206-212
• /
• 2011

막걸리는 고려시대 이후 제조된 우리나라 전통술이다. 본 연구는 막걸리의 유기산 분석과 생리 기능활성을 평가하고자 수행하였다. 막걸리의 유기산 분석 결과, 막걸리는 유기산 중에서 유산균에 의한 대사 산물인 lactic acid를 가장 많이 함유하고 있었으며 시판 막걸리에 따라 다양한 유기산 조성을 나타내고 있었다. 막걸리의 항비만 효과를 전지방세포인 3T3-L1 세포주를 사용하여 평가한 결과, 대조군 대비 막걸리는 전지방세포 분화를 저해하였으며, 특히 $100{\mu}g/mL$의 농도에서 40-70% 수준으로 분화를 억제하였다. 또한 혈관신생 억제 효과와 항염증 활성을 관찰하기 위하여, 각각 CAM assay와 LPS를 처리하여 염증반응을 유발한 murine macrophage RAW264.7 세포주에서 NO를 정량하였다. 그 결과, 대부분의 막걸리는 50% 이상의 혈관신생 억제 효과를 확인하였다. 또한 농도의존적으로 NO의 생성량을 유의적 수준으로 저해하였다. 이런 결과를 종합할 때, 막걸리는 항비만, 혈관신생 억제, 그리고 항염증 활성을 가지고 있으며, 이는 막걸리의 누룩미생물 균총의 2차 대사산물의 효과에 기인한다고 생각된다.