• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.79-87
• /
• 2014

The enrichment with nutrients in rivers and lakes becomes serious problems in Korea. As the environmental friendly solution, the phytoremediation are getting more attention and the water hyacinth could be a strong candidate plant for this. Water hyacinth is a free floating freshwater plant proven to be a effective plant used for a purification of a polluted lakes, sewage wastewater, and livestock wastewater. The biggest obstacles for application of water hyacinth in Korea could be the disposal of the water hyacinth before winter, because there is no feasible use for the water hyacinth until now. In this study, the characteristics of water hyacinth were deeply investigated for providing background data to develop appropriate application of the water hyacinth. The water hyacinth was fractioned three parts, leaf, air blader, root of which morphological properties were evaluated with microscope and field emission scanning electron microscope (FE-SEM). The water contents of each parts of the water hyacinth were 87% for leaf, 96.5% for air bladder, 94.6% for root. The chemical compositions of each parts were also measured and showed around 29% of hot water extract in leaf and air bladder, 42% holocellulose for leaf, 47% holocellulose for air bladder. The application of water hyacinth biomass without root parts to papermaking provided bulkier structure, but the tensile strength was decreased.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.1
• /
• pp.1-6
• /
• 1996

This environment of native area and growth characteristics by different age of dendropanax morbifera was grown wild widly at Wando area, particularly, distribution frequency was high at 50 to, 150 meters above the sea level, and configuration of the ground of native area descended slowly toward the southeast. The Soil characteristics of native area was $pH\;5.3{\sim}5.4,\;8.4{\sim}9.8%$ in organic matter content and $18.2{\sim}21.3%$ in soil moisture. The flowering of dendropax morbifera was began at 6 years old tree, and flowering time was at middle of July. The growth characteristics of 6 years old tree was 129cm in stem height, 34mm in stem diameter, 15.4 in number of leaf, and 12.9 cm in petiole length.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.2
• /
• pp.125-131
• /
• 2015

In this study, we determined the ingredient analysis of harvested garlic bulb and soil analysis of four garlic-cultivated regions in Jeju, being one of the major areas of Namdo garlic production. Soil pH and electric conductivity were 7.02 and 1.03 dS/m, respectively. Soil organic matter was 4.31%. The mineral elements (potassium, calcium, magnesium, sodium, iron, manganese, copper and zinc) of Namdo garlic cultivated soil were analyzed by ICP, and calcium was the most highly contained mineral with $14.67cmol_+/kg$ and in the decreasing order of magnesium ($2.25cmol_+/kg$), potassium ($1.51cmol_+/kg$). Soluble solid and total acidity were 7.60 oBrix and 0.49%, respectively. The mineral contents of garlic bulb were in order of potassium (12,728 ppm) > sulfur (7,778 ppm) > phosphorus (4,916 ppm) > magnesium (691 ppm) > calcium (359 ppm). The content of total phenolic, total flavonoid and reducing sugar were 71.14 mg GAE/100 g, 17.64 mg QE/100 g and 26.53 mg GE/g, respectively. Alliin and allicin were 8.78 mg/g and 2.10 mg/g, respectively. The Pearson's correlation coefficients between mineral contents of soil and garlic bulb are analyzed. Macronutrients of soil is correlated with macronutrients of garlic (positive) and micronutrients of garlic (negative) contents.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.1
• /
• pp.20-26
• /
• 2012

This study compared the differences between the Dendranthema boreale and Dendranthema indicum in their habitat, soil adaptability, species composition and community structure in Korea. More D. boreale distributed than D. indicum to in the place where high elevation and on the surface of low degree slope. Both D. boreale and D. indicum growed well in south-east direction of the slope. The soil pH of D. boreale and D. indicum was 6.1 and 7.1, respectively. Ca, Mg, Na and organic matter content of the soil of D. boreale habitat was significantly lower than that of the D. indicum habitat. There were 102 and 88 taxa, in D. boreale and D. indicum habitat, respectively. Both species generally distributed along with herbs than along with trees. The important species found in D. boreale habitat were Artemisia princeps (57.1%) and Humulus japonicus (33.3%), and the D. indicum habitat were Miscanthus sinensis (42.9%) and Lonicera japonica (38.1%). The D. boreale group was classified into Artemisia princeps, Crepidiastrum denticulatum, Miscanthus sinensis, Humulus japonicus, Pueraria lobata, Lespedeza bicolor, Lonicera japonica and Rubus crataegifolius community. The D. indicum group was classified into Artemisia capillaris, Peucedanum japonicum, Boehmeria pannosa, Pinus thunbergii, Lonicera japonica, Quercus acutissima and Robinia pseudoacacia community. There is a large difference bewteen D. boreale and D. indicum in their habitat, soil adaptability, species composition and community structure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.2
• /
• pp.93-97
• /
• 1977

A pot experiment was conducted to find out suitable method in determining the rate of phosphorus application. Soybean was planted under optimum moisture condition. The soils used in this experiment were cultivated and non-cultivated mineral soils, and volcanic ash soils. The results were summarized as follows: 1. Phosphorus adsorption maximum(PAM) was the good parameters to determine phosphorus adsorption capacity of all tested soils. 2. Phosporus adsorption maximum was increased with the content of ammonium acetate extractable aluminum, and the organic matter effects on PAM was considerably high in volcanic ash soils. 3. Requirement of phosphorus for maximum yields were in the range of 30~35% of PAM for tested soils. 4. PAM was considered as a suitable criteria to determine the rate of the phosphorus application and it was also considered to be more attractive than phosphorus absorption coefficient.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.2
• /
• pp.117-121
• /
• 2013

Single or co-inoculation of phosphate solubilizing bacterial and fungal strains (Burkholderia anthina and Aspergillus awamori respectively) was performed separately to assess their synergistic and antagonistic interactions and the potential to be used as bio-inoculants. Co-inoculation was found to release the highest content of soluble phosphorus (1253 ${\mu}g\;ml^{-1}$) into the medium, followed by single inoculation of fungal strain (1214 ${\mu}g\;ml^{-1}$) and bacterial strain (997 ${\mu}g\;ml^{-1}$). However, there was no significant difference between single inoculation of fungal strain and co-inoculation of fungal and bacterial strain in terms of the phosphorous release. The highest pH reduction, organic acid production and glucose consumption were observed in the sole A. awamori inoculated culture medium. According to the plant growth promotion bioassays, co-inoculation of the microbial strains resulted in 21% and 43% higher shoot and root growth of the mung bean seedlings respectively as compared to the respective controls. Therefore, co-inoculation of B. anthina and A. awamori showed better performance in stimulating plant growth than that in inoculation of each strain alone. However, assessment period of the present study being short, we recommend in engaging further experimentation under field conditions in order to test the suitability of the strains to be used as bio-inoculants.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.256-262
• /
• 2005

The purpose of this study is to investigate the performances of organic removal and methane recovery by using a full scale two-phase anaerobic system. The full scale two-phase anaerobic process was consists of an acidogenic anaerobic baffled reactor (ABR) and a methanognic upflow anaerobic sludge blanket (UASB) reactor. The volumes of acidogenic and methanogenic reactors were designed to $28.3m^3$ and $75.3m^3$. The two-phase anaerobic system represented 60-82% of COD removal efficiency when the influent COD concentration was in the range of 7,150 to 16,270 mg/L after screening (average concentration is 10,280 mg/L). After steady-state, the effluent COD concentration in the methanogenic reactor showed $2,740{\pm}330 mg/L$ by representing average COD removal efficiency was $71.4{\pm}8.1%$ when the operating temperature was in the range of $19-32^{\circ}C$. The effluent SCOD concentration was in the range of 2,000-3,000 mg/L at the steady state while the volatile fatty acid concentration was not detected in the effluent. Meanwhile, the COD removal efficiency in the acidogenic reactor showed less than 5%. The acidogenic reactor played key roles to reduce a shock-loading when periodic shock loading was applied and to acidify influent organics. Due to the high concentration of alkalinity and high pH in the effluent of the methanogenic reactor, over 80% of methane in the biogas was produced consistently. More than 70% of methane was recovered from theoretical methane production of TCOD removed in this research. The produced gas can be directly used as a heat source to increase the reactor temperature.

• Korean Journal of Materials Research
• /
• v.20 no.3
• /
• pp.142-147
• /
• 2010

Nano-sized $BaNd_2Ti_5O_{14}$ powders were prepared by the spray pyrolysis process. Sucrose used as the organic additive enabled the formation of nano-sized $BaNd_2Ti_5O_{14}$ powders. The powders prepared from the spray solution without sucrose had a spherical shape, dense structure and micron size before and after calcination. However, the precursor powders prepared from the spray solution with sucrose had a large size, and hollow and porous morphology. The precursor powders had an amorphous crystal structure because of the short residence time of the powders inside the hot wall reactor. The complete decomposition of sucrose did not occur inside the hot wall reactor. Therefore, the precursor powders obtained from the spray solution with sucrose of 0.5M had a carbon content of 39.2wt.%. The powders obtained from the spray solution with sucrose of 0.5M had a slightly aggregated structure of nano-sized primary powders of $BaNd_2Ti_5O_{14}$ crystalline phase after calcination at $1000^{\circ}C$. The calcined powders turned into nano-sized $BaNd_2Ti_5O_{14}$ powders after milling. The mean size of the $BaNd_2Ti_5O_{14}$ powders was 125 nm.

• Toxicological Research
• /
• v.26 no.2
• /
• pp.101-108
• /
• 2010

Halogenated organic compounds, such as 1-bromobutane (1-BB), have been used as cleaning agents, agents for chemical syntheses or extraction solvents in workplace. In the present study, immunotoxic effects of 1-BB and its conjugation with glutathione (GSH) were investigated in female BALB/c mice. Animals were treated orally with 1-BB at 375, 750 and 1500 mg/kg in corn oil once for dose response or treated orally with 1-BB at 1500 mg/kg for 6, 12, 24 and 48 hr for time course. S-Butyl GSH was identified in spleen by liquid chromatography-electrospray ionization tandem mass spectrometry. Splenic GSH levels were significantly reduced by single treatment with 1-BB. S-Butyl GSH conjugates were detected in spleen from 6 hr after treatment. Oral 1-BB significantly suppressed the antibody response to a T-dependent antigen and the production of splenic intracellular interlukin-2 in response to Con A. Our present results suggest that 1-BB could cause immunotoxicity as well as reduction of splenic GSH content, due to the formation of GSH conjugates in mice. The present results would be useful to understand molecular toxic mechanism of low molecular weight haloalkanes and to develop biological markers for exposure to haloalkanes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.110-112
• /
• 2006

Membrane electrode assembly (MEA) for polymer electrolyte fuel cell (PEFC) are commonly prepared in the research laboratory by spraying, screen-printing and brushing catalyst slurry onto membrane or other support material like carbon paper or polyimide film in a batch style. These hand applications of the catalyst slurry are painstaking process with respect to precision of catalyst loading and reproducibility. It has been generally mentioned that the adoption of continuous process is very helpful to develop the reliable product. In the present work, we report the results of using continuous type coater with doctor-blade to coat catalyst slurry for preparing the MEA catalyst layers In a faster and highly reproducible fashion. We show that while expectedly faster than batch style, the machine coater requires the use of slurry of appropriate composition and a properly selected transfer decal material in order to achieve superior MEA plat lnw loading reproducibility. To make highly viscous catalyst slurry that is imperative for using coater, we use 40wt.% Nafion solution and minimize the content of organic solvent. And the choice of proper high surface area catalyst is important in the viewpoint of making well-dispersed slurry. After catalyst coating onto the support material, we transferred the catalyst layer to both sides of Nafion membrane by hot-pressing In this case, the degree of transfer was Influenced by hot-pressing condition including temperature, pressure, and time. To compare the transferring ability, we compared so many films and detaching papers. And among the support, polyethylene terephthalate(PET) film shows the prominent result.