• Title/Summary/Keyword: organic content

Search Result 3,965, Processing Time 0.03 seconds

Biology and Health Aspects of Molds in Foods and the Environment

  • Bullerman, Lloyd-B.
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.22 no.3
    • /
    • pp.359-366
    • /
    • 1993
  • Molds are eucaryotic, multicellular, multinucleate, filamentous organisms that reproduce by forming asexual and sexual spores. The spores are readily spread through the air and because they are very light-weight and tend to behave like dust particles, they are easily disseminated on air currents. Molds therefore are ubiquitous organisms that are found everywhere, throughout the environment. The natural habitat of most molds is the soil where they grow on and break down decaying vegetable matter. Thus, where there is decaying organic matter in an area, there are often high numbers of mold spores in the atmosphere of the environment. Molds are common contaminants of plant materials, including grains and seeds, and therefore readily contaminate human foods and animal feeds. Molds can tolerate relatively harsh environments and adapt to more severe stresses than most microorganisms. They require less available moisture for growth than bacteria and yeasts and can grow on substrates containing concentrations of sugar or salt that bacteria can not tolerate. Most molds are highly aerobic, requiring oxygen for growth. Molds grow over a wide temperature range, but few can grow at extremely high temperatures. Molds have simple nutritional requirements, requiring primarily a source of carbon and simple organic nitrogen. Because of this, molds can grow on many foods and feed materials and cause spoilage and deterioration. Some molds ran produce toxic substances known as mycotoxins, which are toxic to humans and animals. Mold growth in foods can be controlled by manipulating factors such as atmosphere, moisture content, water activity, relative humidity and temperature. The presence of other microorganisms tends to restrict mold growth, especially if conditions are favorable for growth of bacteria or yeasts. Certain chemicals in the substrate may also inhibit mold growth. These may be naturally occurring or added for the purpose of preservation. Only a relatively few of the approximately 100,000 different species of fungi are involved in the deterioration of food and agricultural commodities and production of mycotoxins. Deteriorative and toxic mold species are found primarily in the genera Aspergillus, Penicillium, Fusarium, Alternaria, Trichothecium, Trichoderma, Rhizopus, Mucor and Cladosporium. While many molds can be observed as surface growth on foods, they also often occur as internal contaminants of nuts, seeds and grains. Mold deterioration of foods and agricultural commodities is a serious problem world-wide. However, molds also pose hazards to human and animal health in the form of mycotoxins, as infectious agents and as respiratory irritants and allergens. Thus, molds are involved in a number of human and animal diseases with serious implication for health.

  • PDF

Stability of Anthocyanin Pigment from Juice of Raspberries (나무딸기(복분자(覆盆子)) 과즙색소(果汁色素) Anthocyanin의 안정성(安定性)에 관한 연구(硏究))

  • Park, Jung-Mi;Joo, Kwang-Jee
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.11 no.3
    • /
    • pp.67-74
    • /
    • 1982
  • The effect of various pH levels, temperatures. organic acids, inorganic salts, metal ions on the stability of the anthocyanins pigment (pH 3.7) from the juice of raspberries were investigated. Initial absorption of total anthocyanin was decreased as pH increased from 1.0 to 7.0. Total amount of anthocyanin reached the highest at pH 3.7 and least at pH 7.0. The total anthocyanin content decreased rapidly with the increasing temperature. Many organic acids were found to enrich and stabilize the color density at 520nm in anthocyanin solution (pH 3.7). The hyperchromic effect of saturated n-carboxylic acid increased in the following order; formic acid> acetic acid>n-butyric acid>propionic acid. On the polycarboxylic acid, especially, malic acid showed 550$\sim$930% higher than control group. On the inorganic salts (0.5M), sodium perchlorate had the most hyperchromic effect and followed by sodium sulfate>sodium chloride>sodium phosphate, monobasic. Among the metal ions, both aluminium ion and cupric ion much more accelerated the anthocyanins degradation as compared with other metal ions.

  • PDF

Survey on distribution and vegetation environment of Tricholoma matsutake in Kyonggi province, Korea (경기도지역 송이버섯 분포 및 식생환경조사)

  • Ha, Tai-Moon;Kim, Young-Ho;Chi, Jeong-Hyun;Ju, Young-Cheuol;Kim, Hee-Dong;Sung, Jae-Mo
    • Journal of Mushroom
    • /
    • v.2 no.4
    • /
    • pp.175-183
    • /
    • 2004
  • We carried out survey of a pine mushroom picking district and its vegetation environment for increase and maintainment of its production in Kyonggi province. The district which we could pick up pine mushroom among the nineteen surveyed district were sixteen such as Geoleun ri Gangcheon myeon Yeoju gun Kyonggi do, etc. and total yields were 470~600 kg in Kyonggi province. The temperature of atmosphere and earth in Yeoju and Bonghwa were droped to $19^{\circ}C$ at 5~7th september and maintained from $12^{\circ}C{\sim}18^{\circ}C$ during the a pine mushroom picking period. The density of a pine tree per $100m^2$ was 5.1~27.1 trees, the years of it was 15~50years old and height was 4~11 meter. The pine tree in a pine mushroom picking district was competed with oak trees, azaleas, lacquers, etc. The depth of organic materials accumulated on the pine mushroom mycelium layer was 4.5 cm in Yeoju. The soil texture of a pine mushroom picking district was almost sandy, soil pH was 4.3~5.1 and organic material content was 3.91~8.28%.

  • PDF

Geochemical and Geophysical Characteristics of Shallow Gases in the Deep Sea Sediments, Southwestern Ulleung Basin (울릉분지 남서부 심해저 퇴적층에 분포하는 천부 가스의 지화학 및 지구물리 특성)

  • 김일수;이영주;유동근;류병재
    • Economic and Environmental Geology
    • /
    • v.36 no.3
    • /
    • pp.149-157
    • /
    • 2003
  • Deep sea core samples were taken in the southwestern part of the Ulleung Basin in order to characterize the properties of shallow gases in the sediment. Amount of shallow gases in the sediments were calculated by head space techniques, and chemical and isotopic compositions of hydrocarbon gases were analyzed. Geochemical analyses were carried out on the gas bearing sediments to find out relationship between natural gas contents and organic characteristics of the sediments. Seismic characteristics of shallow gases in the sediments were also examined in this study. The amount of the hydrocarbon gases in the sediments range from 0.01% to 11.25%. Calculation of volume of gas per volume of wet sediment varies from 0.1 to 82.0 ml HC/L wet sediment. Methane consists 98% of the total hydrocarbon gases except for two samples. Based on the methane content and isotopic composition$(\delta^{13}c)$: -94.31$\textperthousand$~-55.5$\textperthousand$), the hydrocarbon gases from the sediments are generated from bacterial activities of methanogenic microbes. Contents of hydrocarbon gases are variable from site to site. Volume of shallow gases in the sediments shows no apparent trends vs. either characteristics of organic matter or particle sizes of the sediments. Gas concentration is high in the area of seismic anomalies such as blanking zone or chimney structures in the section. Physicochemically the pore water and the formation water systems are saturated with gases in these areas. Concentration of hydrocarbon gases in the sediments in these area shows favorable condition for generation of gas hydrate, as far as the other conditions are satisfied.

Determination of Trace Mo(VI) in Seawater Samples by Ion Pair Formation and Solvent Extraction (이온쌍 형성-용매추출에 의한 해수 중 극미량 Mo(VI)의 정량)

  • Kim, Young-Sang;Nho, Seung-Gu;Choi, Jong-Moon
    • Analytical Science and Technology
    • /
    • v.6 no.3
    • /
    • pp.329-334
    • /
    • 1993
  • The formation of Mo(VI)-alizarin red S chelate ion its extraction into an organic solvent by ion-pairing for the separarive determination of trace Mo(VI) in natural water was applied in seawater samples. Removed Fe(III) and Zn(II), and Cu(II) by precipitating with anthranilic acid at pH 4.0 and 2.0, seawater 100mL was sampled in 250mL separatory funnel. After Mo(VI)-ARS chelate ion was formed by adding 0.01M alizarin red S solution 1.0mL to the water sample of pH 4.6, 0.6% aliquat-336 chloroform solution 10mL was added and the solution was vigorously shaked for about 30 seconds to form the ion-pair between Mo(VI)-ARS and aliquat-336 perfectly. The solution was stood for about 30 minutes. And the organic phase was taken for the absorbance measurement of the ion-pair at 520nm. The content of Mo(VI) was obtained from the standard calibration curve. Several extraction conditions such as pH, adding amounts of alizarin red S and aliquat-336, and shaking and standing times were optimized and the interferences and release of concomitant ions was also studied. This procedure was applied to the analysis of Eastern and Yellow seawaters. It could be confirmed from the recoveries of over 85% in samples spiked with a given amount of Mo(VI) that this method was also quantitative in the determination of trace Mo(VI) in a seawater.

  • PDF

Solvent Extraction of Trace Mo(VI) in Natural Water Samples by Chelation and Ion-pairing (킬레이트 및 이온쌍 형성을 이용한 자연수 중 극미량 Mo(VI)의 용매추출)

  • Kim, Young-Sang;Nho, Seung-Gu;Choi, Jong-Moon;Choi, Hee-Seon
    • Analytical Science and Technology
    • /
    • v.6 no.3
    • /
    • pp.289-296
    • /
    • 1993
  • The formation of Mo(VI)-alizarin red S chelate ion and its extraction into an organic solvent by ion-pairing were studied for the separative determination of trace Mo(VI) in natural water samples. Natural water 100mL was sampled in 250mL separatory funnel. After Mo(VI)-ARS chelate ion was formed by adding 0.01M alizarin red S solution 0.5mL to the water sample of pH 4.0, 0.2% aliquat-336 chloroform solution 10mL was added and the solution was vigorously shaked for about 30 seconds to from the ion-pair between Mo(VI)-ARS and aliquat-336, completely. The solution was stood for about 90 minutes. And the organic phase was taken for the absorbance measurement of the ion-pair at 520 nm. The content of Mo(VI) in sample was obtained from the standard calibration curve. Several extraction conditions such as pH, adding amounts of alizarin red S and aliquat-336, and shaking and standing times were optimized. This procedure was applied to the analysis of river and tap waters. It could be confirmed from the recoveries of over 99% in samples spiked with a given amount of Mo(VI) that this method was quantitiative in the determination of trace Mo(VI) in a natural water.

  • PDF

Development of Organic Fertilizer based on the Cow Dung -II. Studies on Rapid Fermentation (우분(牛糞)의 유기질비료화(有機質肥料化) 연구(硏究) -II. 속성부숙방법(速成腐熟方法))

  • Lim, Dong-Kyu;Moon, Yoon-Ho;Shin, Jae-Sung;Woo, Ki-Dae
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.24 no.3
    • /
    • pp.192-199
    • /
    • 1991
  • To manufacture a good organic fertilizer through rapid composting process, cow dung was mixed with bulking materials such as rice straws, shredded bark, wood chips, and saw dust. The mixing ratio of the cow dung and bulking material was two to one on volume basis and moisture content was adjusted to 60 to 70 percent, C/N ratio 25 to 30 and aeration forced with suction during the aerated pile fermentation. Aerated pile was established outdoors and curing pile was in vinylhouse and the experiment was conducted for 3 years from '88 to '90. After pilling, temperature in aerated pile was reached to the maximum level at 7 to 9 days and the temperatures of cow dung + shredded bark, cow dung + wood chips, and cow dung + rice straws were higher than that of cow dung, and cow dung + saw dust. Total carbon, and C/N ratio in aerated pile fermentation period were increased in the middle stage and then they were decreased with the process of days, and nutrient contents in curing pile period had the same tendency as in the aerated pile.

  • PDF

Effect of Beer Sewage Sludge Application on Red Pepper (고추에 대한 맥주오니(麥酒汚泥) 시용효과시험(施用效果試驗)(제(第)I보(報)))

  • Yuk, Chang-Soo;Cho, Seong-Jin
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.18 no.2
    • /
    • pp.113-120
    • /
    • 1985
  • A filed experiment was carried out to investigate the effects for growth, yield of red lopper (Saelona) and properties of soil by beer sewage sludge application to the sandy loam which fertility was common. The results obtained were summerized as follows. 1. Growth of red pepper in sludge plot was very poor by drought in early stage, but color of loaves was green and growth strength was better than nontreated plot after rainfall in last stage. There were no significant differencies between plant height, number of branch on main stem and stem height in sludge and standard plot. 2. Yield of matured red pepper per plant in NPK+, and PK+ sludge 1200kg, 2400kg and 4800kg/10a plot were less than those in standard plot respectively. 3. Ratio of dry weight of matured red pepper in NPK+, and PK+ sludge 1200kg, 2400kg and 4800kg/10a were high than those in standard plot appreciably. 4. Sewage sludge application (1200kg/10a. N=51kg) was available as nitrogen source of organic fertilizer considerably, but there were some growth inhibition by excess of amount applied. 5. Sewage sludge application decreased the pH of the soil and increased the content of organic matter and exchangeable babe in the soil appreciably.

  • PDF

Studies on Some Physiological and Morphological Characteristics of Actinomycetes in Paddy Soil applied Organic Materials (유기물(有機物) 시용시(施用時) 논 토양(土壤)에서 방선균(放線菌)의 형태(形態) 및 생리학적(生理學的) 특성(特性))

  • Park, Kyung-Soo;Park, Youl;Ryu, Jin-Chang
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.20 no.1
    • /
    • pp.77-84
    • /
    • 1987
  • The population of actinomycetes in paddy soils, with hay compost and inorganic fertilizer had been applied respectively was investigated. Actinomycetes were isolated by using selective medium and the population densities of actinomycetes in paddy soil was examined. The population of actinomycetes were reached at a range from $2.1{\times}10^6$ to $7.4{\times}10^7$ per gram of the soil. The composition of actinomycetes flora changed considerably after hay compost applied. The significant positive correlations between the organic matter content in paddy soil and the actinomycetes populations were given at 1.38 to 2.69 level. According to the result of several morphological observation, similar strains isolated were classified into 21 groups. More detailed taxonomic characterization were carried out on the isolated strains. Therefore, 15 groups of Streptomyces and 6 groups of non-Streptomyces were classified into actinomycetes isolates, percentage of streptomyces and non-Streptomyces strains were 87.2% and 12.8% in the isolated 250 actinomycetes strains respectively. Streptomyces with sporophore of the spiral chain form accounted for 80% of all the Streptomyces isolates. Surface morphology of spores were determined with the electron microscope, three species have a spiny surface, and 13 strains have a smooth spore surface.

  • PDF

Preparation of Poly(vinylpyrrolidone) Coated Iron Oxide Nanoparticles for Contrast Agent (조영제로 활용하기 위한 폴리(비닐피롤리돈)이 코팅된 산화철 나노 입자의 제조)

  • Lee Ha Young;Lim Nak Hyun;Seo Jin A;Khang Gilson;Kim Jungahn;Lee Hai Bang;Cho Sun Hang
    • Polymer(Korea)
    • /
    • v.29 no.3
    • /
    • pp.266-270
    • /
    • 2005
  • Iron oxide nanoparticles were prepared by the thermal decomposition of iron pentacarbonyl (Fe(CO)$_5$) Poly(vinylpyrrolidone) (PVP) was used as surface-modifying agent to control the size of the iron oxide nanoparticles. The crystalline structure of PVP coated iron oxide nanoparticles was determined by XRD. The size of PVP coated iron oxide nanoparticles was determined by TEM and ELS. The particle sizes of PVP coated iron oxide nanoparticles were controlled by adjusting the molar ratio of PVP/Fe (CO)$_5$, solvent and molecular weight of PVP Particle sizes increased with increasing PVP content. Spherical $50\~100$ nm sized iron oxide nanoclusters were produced when dimethylformamide was used as a solvent. And well-defined 10 nm iron oxide nanoparticles were produced in Carbitol. The prepared PVP coated iron oxide nanoparticles exhibited a well-dispersed property in water. The results obtained in this study confirmed the feasibility of the PVP-coated iron oxide nanoparticles as a biomaterial for MRI contrast agent.