• 여성건강간호학회지
• /
• 제6권2호
• /
• pp.234-257
• /
• 2000

At present in the medical care, the study and effort for producing health service to consider efficiency, effectiveness, and quality are urgently called for because of the difficulty in the keen competition according to the inter- nationalization and opening, the operation in the medical institution service testing system, the change in the medical policy of KDRGs, and the lack of the health care cost increasing rate. As an alternative, the case management for the new management system is introduced in the U.S., and the Critical Pathway that is the method designing the contents of activity and its result has been developed and applied in order to anticipate and manage the patient-outcome for the realization of the cost-effective case-management. Thus, this study intended to analyze the effectiveness to obtain by developing the Critical Pathway presented as the method to improve the quality-betterment and cost effectiveness through the continuous and consistent patient management for the hysterectomy patient and applying it to the real practice. As a study method, this author formed a conceptual framework through considering five Critical Pathway used in the current U.S. and three Critical Pathway presented in the literature to develop the Critical Pathway for the hysterectomy patient, and made out the preliminary Critical Pathway through reviewing the old chart. This author made the verified the validity of the expert group about the developed Critical Pathway, and to confirm the possibility of practice application, completed and settled the final Critical Pathway after using the Critical Pathway to the hysterectomy patient from March 1st to 15th, 1997. Finally, to analyze the application-effect of the developed Critical Pathway, this author offered health care service applying the Critical Pathway to the hysterectomy patient from April 15th to August 31th, 1997. The guide for the Critical Pathway was carried out in advance by outpatient setting nurse for outpatient setting visit before the operation, and after hospitalization the primary nurse monitored the execution degree on the every duty. After discharge this author surveyed the complication through phone visiting, and one month after discharge surveyed the patient's reaction about the offered service when outpatient setting visit and analyzed the result. The source for health care cost was obtained by the statistics about the hospital charge which was offered by the General Business Department. The results were as follows. 1. It was decided that the vertical line of the Critical Pathway was made up of eight items such as monitoring/assessment, treatment, line/drains, activity, medication, lab test, diet, patient teaching, and the horizontal line of the Critical Pathway was made up of from hospitalization to discharge. 2. After the analysis of service contents through reviewing the old chart, it was decided that the horizontal line of the preliminary Critical Pathway was made up of from hopitalization to fourth postoperative day, and the vertical line of it was divided into eight items which were the contents to occur with the time frame of the horizontal line. 3. After the verifying the validity of the expert group about the preliminary Critical Pathway, the horizontal line was amended from hopitalization to third postoperative day, and taking their consensus, some contents of the horizontal line was amended and deleted. 4. From March 1st to 15th, 1997, to confirm the clinical suitability, this author offered eight hysterectomy patients the medical service through the Critical Pathway. The result was that three of them could be discharged at the expected discharge day, and the others later than that day. Supplementing the preliminary Critical Pathway through analyzing the cause of that delay- case, this author developed the final Critical Pathway. 5. There were no significant differences between the experimental and the control group in the incidence of complication(P > 0.05). 6. The 92.4% of experimental group was satisfied with the Critical Pathway service. 7. The length of hospital stay of the experimental group offered with the Critical Pathway service was 4.6 days and there was a significant difference that it was 1.3 days shorter than that of the control group(t=-29.514, P=0.000). 8. There wsa a significant difference that the mean medical charge per one patient of the experimental group offered the Critical Pathway service was cheaper \124,150 than that of the control group(t=-9.826, P=0.000). 9. The result that the author assumed and analyzed hospital income with the rate of turning bed was assumed that the increase of hospital income was \63,245,072 for that study, and the income increase was expected with \68,704,864 for a year. The result that this author applied the Critical Pathway to the hysterectomy patient have no differences in the incidence of complication, high satisfaction with that service, and the length of hospital stay decreased in the experimental group, and the mean hospital charge per one patient decreased, but hospital income increased. Suggestions for further study and nursing practice are as follows. 1. The study to apply the Critical Pathway for a year, verify the validity, and measure the effect repeatedly is needed. 2. To apply and manage the Critical Pathway effectively, the study to computerize it is needed. 3. The study to develop hospital-based Critical Pathway about other diseases or procedure, and measure the effect is needed.

• Pediatric Infection and Vaccine
• /
• 제13권2호
• /
• pp.137-146
• /
• 2006

목 적 : BCG 접종 후 가장 흔하게 발생하는 이상 반응인 국소 림프절염이 동반된 소아들을 대상으로 이들이 접종받은 BCG 균주의 비율, 림프절 크기에 따른 화농화 빈도, 약물치료 여부에 따른 임상 경과를 조사하여 이에 대한 발생 요인을 찾고, 치료방향을 설정하는데 도움이 되고자 본 연구를 시도하였다. 방 법 : 1997년부터 6년의 기간동안 가톨릭대학교 성빈센트병원 소아과 외래에 내원한 환아 중 BCG 접종 후에 발생한 국소 림프절염으로 진단된 생후 24개월 미만의 영유아 52명을 대상으로 하였다. BCG 균주의 종류, 접종 장소, 림프절염의 위치와 크기를 의무기록을 통하여 후향적으로 확인하였고, BCG 균주, 림프절염의 크기, 자연 치유율 및 화농화간의 상관관계를 조사하였다. 결 과 : BCG 접종 후 국소 림프절염의 첫 발견시기의 연령은 평균 5.5개월이었으며, 내원시의 림프절 크기가 클수록 첫 발견시기의 연령이 어렸고, 발생부위는 BCG를 접종한 같은 쪽의 겨드랑 부위가 가장 흔하였다. 대상군 52례 중 Pasteur 균주를 피내 접종한 군이 46례(88.5%)로 대부분을 차지하였고, Tokyo 균주를 경피 다천자법으로 접종한 군은 5례(9.6%)이었다. 이 중 28례(53.8%)는 자연 치유되었고 24례(46.2%)는 화농되었는데 림프절의 크기가 클수록 화농 빈도는 의미있게 높았으나, 균주에 따른 차이는 없었다. 약물치료는 화농 예방에 효과가 없었으며 치유기간을 단축시키지도 못했다. 결 론 : BCG 후의 림프절염의 발생은 균주와 접종방법에 따른 차이가 있는 것으로 예측된다. 약물치료는 효과가 없었으므로 권장되지 않으며 특히 비화농성인 경우는 자연히 소실될 수도 있기에 치료없이 관찰만이 요구된다. 이상적인 BCG는 접종 후 반흔을 남기고, 결핵 피부반응검사에 영향을 덜미치면서 이상반응이 적게 나타나며 저렴한 것이다. 이러한 조건을 가장 많이 충족시키는 BCG 균주를 선택하여 사용하는 노력이 필요하다 하겠다.

• 복식
• /
• 제39권
• /
• pp.113-123
• /
• 1998

This study focuses on the effects of the clothes worn by kisaeng; courtesans trained in singing and dancing, on changes in female psychology as reflected in general women's fashions during the later years of the Chosun dynasty. During this period, the social order had broken down considerable, due in part to the introduction of Roman Catholicism, and in part to the actions of Sil-hak, who emphasized open-ness and practicality in the organization of social affairs. This freer social environment disrup-ted the established social hierarchies. The kisaeng were among the first to respond to the new social mores by adopting more colorful, sensual, and individualized fashions. Their social position allowed them to reflect the new aesthetics of the time right away. Those aesthetics seemed to lay great emphasis on the artistic effects of contrast. The kisaeng would adorn their heads with large Kache (an elaborate wig or hairdo typically reserved for use by women in full formal dress). In contrast to this conspicuous hairstyle, they typically wore very tight-fitting Jogori (short-cropped Korean traditional jackets for women) around their upper torsos. The long skirts emerging from beneath these short jackets would typically flare out dramatically, with the aid of petticoats. However, these skirts would be bound at the waist with a sash, increasing the sexual suggestiveness of the clothing by drawing at-tention to the hips, and by exposing the bottom frills of the petticoats, or the wide pantal-oons and other undergarments the kisaeng wore to add volume to their skirts. The relative freedom enjoyed by the kisaeng to experiment with new fashions was not widely shared by most women. This generated envy from women of the noble classes, who were more bound by convention, and restrained from adopting such a mode of dress. It also generated envy from women of the humble classes, who saw the kisaeng as working little for their wealth, and yet dressing every day in finery that the average women would only ever be able to afford on her wedding day. This envy directed at the relative freedom/wealth of the kisaeng by women who faced greater socioeconomic constraints was given cultural expression through the adoption of elements of the kisaeng's fashion in the fashions of both noblewomen and humble women in old korea. The luxurious Kache sported by the kisaeng had in fact been borrowed from the habitual attire of upper-class women. So to distinguish themeselves from the kisaeng, they began to abandon these elaborate hairstyles in favor of traditional ceremonial hoods (Nel-ul-a thin black women's hood) and coronets (Suegaechima). This supposed reaction to the abuse of the Kache by the kisaeng still remained influenced by the kisaeng still remained influence by the kisaeng, however, as these headdresses became adorned with many more jewels and decorations, in imitation of the kisaeng's adaptations of the coronet. At the same time, noblewomen began sporting the Jangwue ; a headdress previously worn only by kisaeng and lower class women, and lower class women were then permitted to wear the Kache at weddings. All women behan to wear shorter, tighter Jogori jackets, and to add volume to their skirts. They also attached frills to their under-garments in imitation of the kisaeng's exposed petticoats and pantaloons. The impact of kisaeng fashions was thus deep and widespread, and can be understood as an expression of women's longing for freedom from socioeconomic constraints in the late Chosun dynasty. This study adopts an interdisciplinary ap-proach to the understanding of historical changes in women's fashions. Such interdisciplinary work can greatly enrich the study of fashion, often narrowly focused on clothing morphology and broad generalizations about society. For this reason, specific dynamics of feminine psychology in the late Chosun dynasty were elaborated in this study, to provide a deeper under-standing of the changes in fashion underpinned by them. If more such detailed analyses are undertaken, a whole new understanding of changes in fashion can be generated, and perhaps a transformation of the field of fashion history can be ultimately achieved.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제30권1호
• /
• pp.1-19
• /
• 1991

This study intends to provide some desirable suggestions for the development of application oriented mathematics curriculum. More specific objects of this study is: 1. To identify the meaning of application and modelling in mathematics curriculm. 2. To illuminate the historical background of and trends in application and modelling in the mathematics curricula. 3. To consider the reasons for including application and modelling in the mathematics curriculum. 4. To find out some implication for developing application oriented mathematics curriculum. The meaning of application and modelling is clarified as follows: If an arbitrary area of extra-mathematical reality is submitted to any kind of treatment which invovles mathematical concepts, methods, results, topics, we shall speak of the process of applying mathemtaics to that area. For the result of the process we shall use the term an application of mathematics. Certain objects, relations between them, and structures belonging to the area under consideration are selected and translated into mathemtaical objects, relation and structures, which are said to represent the original ones. Now, the concept of mathematical model is defined as the collection of mathematical objcets, . relations, structures, and so on, irrespective of what area is being represented by the model and how. And the full process of constructing a mathematical model of a given area is called as modelling, or model-building. During the last few decades an enormous extension of the use of mathemtaics in other disciplines has occurred. Nowadays the concept of a mathematical model is often used and interest has turned to the dynamic interaction between the real world and mathematics, to the process translating a real situation into a mathematical model and vice versa. The continued growing importance of mathematics in everyday practice has not been reflected to the same extent in the teaching and learning of mathematics in school. In particular the world-wide 'New Maths Movement' of the 19608 actually caused a reduction of the importance of application and modelling in mathematics teaching. Eventually, in the 1970s, there was a reaction to the excessive formallism of 'New Maths', and a return in many countries to the importance of application and connections to the reality in mathematics teaching. However, the main emphasis was put on mathematical models. Applicaton and modelling should be part of the mathematics curriculum in order to: 1. Convince students, who lacks visible relevance to their present and future lives, that mathematical activities are worthwhile, and motivate their studies. 2. Assist the acqusition and understanding of mathematical ideas, concepts, methods, theories and provide illustrations and interpretations of them. 3. Prepare students for being able to practice application and modelling as private individuals or as citizens, at present or in the future. 4. Foster in students the ability to utilise mathematics in complex situations. Of these four reasons the first is rather defensive, serving to protect or strengthen the position of mathematics, whereas the last three imply a positive interest in application and modelling for their own sake or for their capacity to improve mathematics teaching. Suggestions, recomendations and implications for developing application oriented mathematics curriculum were made as follows: 1. Many applications and modelling case studies suitable for various levels should be investigated and published for the teacher. 2. Mathematics education both for general and vocational students should encompass application and modelling activities, of a constructive as well as analytical and critical nature. 3. Application and modelling activities should. be introduced in mathematics curriculum through the interdisciplinary integrated approach. 4. What are the central ideas of, and what are less-important topics of application-oriented curriculum should be studied and selected. 5. For any mathematics teacher, application and modelling should form part of pre- and in-service education.

• Applied Microscopy
• /
• 제39권2호
• /
• pp.167-173
• /
• 2009

간모세선충(Capillaria hepatica)은 설치류와 인간을 포함한 포유류의 간에 모세선충증(capillariasis)을 일으키는 기생선충이다. 성충은 모세관과 같이 대단히 가늘고 길며, 충체의 앞부분에는 stichosome (염주체) 및 bacillary band 등의 구조가 있다. 간모세선충은 설치류를 주숙주로 하며, 여러 지역에서 채집된 야생 설치류에 거의 100% 감염률이 보고되었다. 자연계에 존재하는 감염형 자충포장란은 물과 음식에 포함되어 포유류에 감염된다. 감염된 성충은 충란을 배출한 뒤 간 조직 내에서 사멸하고, 죽은 충체와 충란은 간 조직에서 숙주 면역반응을 유발시킨다. 본 연구에서는 집쥐로부터 충란을 수집하여 마우스에 감염형 자충포장란을 감염시키고. 감염 7주 후에 간 조직에 포함되어 있는 성충을 손상되지 않게 분리하였다. 분리된 간모세선충은 주사전자현미경과 투과전자현미경을 이용하여 충체 표피의 미세구조를 관찰하였다. 분리된 간모세선충은 길이가 약 99mm로 확인되었으며, 충체의 표피에는 cuticle, bacillary band 등의 구조물이 관찰되었다. Bacillary band에는 여러 형태의 pore가 분포하였고, pore는 cuticle을 가로질러 존재하며, cap material의 존재 유무에 따라 bacillary pore의 형태적 차이가 나타났다. 간모세선충은 간 조직내에서 성장하는 특성을 가지고 있으므로 손상되지 않도록 성충을 분리해 내기 어렵고, 이에 따라 충체 외부형태에 대한 연구가 용이하지 않았던 것으로 생각한다. 이러한 간모세선충의 성충을 손상없이 분리하고, 표피의 미세구조를 확인함으로써 아직까지 연구가 이루어지지 않은 간모세선충을 포함한 선충류의 형태에 관한 연구에 중요한 기초자료가 될 것으로 생각한다.

• 지능정보연구
• /
• 제25권2호
• /
• pp.99-122
• /
• 2019

IDC(International Data Corporation) 사(社)의 최근 보고서에 따르면, 2025년에는 2016년에 생성된 데이터의 10배에 달하는 163제타바이트의 데이터가 생성될 것이고 그 주체의 비중은 소비자에서 기업으로 이동하고 있다고 한다. 이러한 소위 '빅데이터의 물결'은 도래하고 있고 그 파장은 산업 전반적으로 영향을 미칠 것이다. 따라서, 방대한 데이터를 효과적으로 관리하는 것은 기업의 관점에서 그 어느 때보다 더 중요하다. 하지만, IT 투자에 대한 효과를 측정한 선행 연구는 다수 존재함에도 불구하고 빅데이터 투자 효과를 측정한 선행 연구는 거의 전무한 실정이다. 따라서, 해당 투자 효과를 정량적으로 분석한다면 기업의 의사 결정을 도울 수 있을 것이다. 본 연구는 효율적 시장 가설을 이론적 바탕으로 둔 사건연구방법론(Event Study Methodology)을 적용하여, 기업의 빅데이터 투자가 시장 투자자들의 반응에 미치는 영향을 측정하였다. 또한, 보다 심층적으로 이 효과를 분석하기 위해서 5가지 하위 변수를 설정했고 그 내용은 기업 크기 구분, 산업 구분(Finance와 ICT), 투자 구축 완료 구분, 벤더 유무 구분이다. 분석 결과, 91개 기업은 빅데이터 투자 공시 이후 시장 가치가 평균 0.92% 상승한다는 사실을 확인하였다. 특히 Finance 기업, non-ICT 기업, 시가 총액이 작은 기업, 빅데이터 전문 벤더 기업을 통해 투자한 기업, 그리고 빅데이터 시스템이 구축 완료됐다는 공시에 해당하는 기업의 시장 가치가 두드러지게 상승한다는 사실을 알 수 있었다. 본 연구는 빅데이터 투자 효과를 측정한 선행 연구가 거의 전무하다는 점에서 학문적인 의의를 지니고, 빅데이터 투자를 고려 중인 기업 의사 결정자들에게 실질적인 참고 자료가 될 수 있다는 점에서 실무적인 시사점을 갖는다.

• 대한수의학회지
• /
• 제5권1호
• /
• pp.1-16
• /
• 1965

I. A Comparison of Sodium Sulfate Precipitation and Zone(Paper, Agar) Electrophoresis; Many kinds of techniques have been used for fractionating serum proteins. In the present study, using bovine serum, the fractions obtained with sodium sulfate were compared with those determined by zone electrophoresis. 1. Fibrinogen was precipitated with 4 to 10 percent of sodium sulfate. 2. ${\gamma}$-globulin required 10 to 16 percent of the salt for precipitation. 3. ${\beta}$-globulin began to precipitate at 12 percent sodium sulfate, and completed precipitation at approximately 26 percent in paper electrophoresis, while at 22 percent in agar electrophoresis. 4. ${\alpha}$-globulin completed precipitation at 13 to 28 percent sodium sulfate in paper electrophoresis and at 22 percent in agar electrophoresis. 5. Albumin began to precipitate at 14 percent of the salt, and was free from the mixture of globulins approximately at 28 percent in paper electrophoresis, while at 22 percent in agar electrophoresis. The results of comparing fractions by the two methods were as follows: 1. Euglobulin (15%) was equal to the sum of the most ${\gamma}$-globulin and a small quantity of the ${\alpha}$-, and ${\beta}$-globulins. 2. Pseudoglobulin I (15-17.5%) corresponded to the most ${\alpha}$-, ${\beta}$-globulins and a small quantity of albumin. 3. Pseudoglobulin II(18-22%) was a mixture of the ${\alpha}$-, ${\beta}$-globulins and albumin fraction. 4. Albumin (above 22%) contained the most albumin fraction separated by zone electrophoresis and a small quantity of the ${\alpha}$-, and ${\beta}$-globulins. As mentioned above the fractions obtained with sodium sulfate were a mixture of the various proportion of the fractions determined by zone electrophoresis. The solubility of serum fractions to sodium sulfate coincided with the mobility of those by zone electrophoresis. (By percent of sodium sulfate we mean gram of sodium sulfate contained in $100m{\ell}$ of solution). II. Immunological Studies on Serum Protein Fractions with Sodium Sulfate; In the previous report the fractions of bovine serum protein with sodium sulfate compared with those obtained by zone electrophoresis, and the findings were that the former contained various proportion components of the latter. In this study the author studied whether or not the fractions with sodium sulfate are simple component antigenically by immunoelectrophoresis and micro double diffusion test (Immuno-precipitation), using rabbit antiserum to bovine serum. In immunoelectrophoresis, normal bovine serum developed with rabbit antibovine serum showed about ten distinct precipitin arcs. The distribution of these arcs was as follows: 1 albumin, 2 ${\alpha}_1$-, 3 ${\alpha}_2$-, 2 ${\beta}_1$-, ${\beta}_2$-, and 1 ${\gamma}$-globulin (Fig. 7, 9). In micro double diffusion test, five to six precipitation bands could be seen between antigens and antibody, the order of the precipitation bands location is albumin, ${\alpha}$-, ${\beta}$-, and ${\gamma}$-globulin from the side of antiserum well (Fig.19). Frequently the ${\alpha}$-, and ${\beta}$-precipitation bands were separated into two or three precipitation bands, which indicated that these globuline are not a pure component antigenically as shown in immuno-electrophoresis. In both Immunological methods, the two ${\alpha}$-, ${\beta}$-precipitin arcs and bands appeared clear and strong, indicating that the two globulins reacted as strong antigens. The precipitate reaction of ${\gamma}$-globulin was shown at 12 to 16 percent sodium sulfate; ${\beta}$-globulin at 12 to 20 percent; ${\alpha}$-globulin at 12 to 22 percent (immuno-electrophoresis), at 12 to 26 percent (Diffusion); and albumin at above 22 percent. Antigenically euglobulin contained ${\gamma}$-, ${\beta}$-, and ${\alpha}$-globulins, Pseudoglobulin I and Pseudoglobulin II were composed of ${\alpha}$-, and ${\beta}$-globulins, and albumin was a mixture of ${\alpha}$-globulin and albumin determined by zone electrophoresis. The results indicated that the fractions of serum protein obtained by either method were constituents of various proteins antigenically except ${\gamma}$-globulin and albumin by Zone electrophoresis.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권3호
• /
• pp.186-196
• /
• 2010

Introduction: The first aim of this study was to isolate the dental tissue-derived stem cells from the dental follicle (DF), dental pulp (DP), and root apical papilla (RAP) of the extracted wisdom teeth. Second was to evaluate their characterization with the expressions of transcription factors and cell surface markers. Finally, their ability of the in vitro multi-lineage differentiations into osteogenic and adipogenic cells were compared, respectively. Materials and Methods: Dental tissues, including dental follicle, dental pulp, and root apical papilla, were separated in the extracted wisdom teeth. These three dental tissues were cultured in Dulbecco’s modified Eagle’s medium (DMEM) with supplements, respectively. After passage 3, the homogeneous shaped dental tissue-derived cells were analyzed the expression of transcription factors (Oct-4, Nanog and Sox-2) and cell surface markers (CD44, CD90 and CD105) with reverse transcription polymerase chain reaction (RT-PCR) and fluorescence-activated cell sorting (FACS) analysis. In order to evaluate in vitro multi-lineage differentiations, the culture media were changed to the osteogenic and adipogenic induction mediums when the dental tissue-derived cells reached to passage 3. The characteristics of these three dental tissue-derived cells were compared with immunohistochemistry. Results: During primary culture, heterogenous and colony formatted dental tissue-derived cells were observed in the culture plates. After passage 2 or 3, homogenous spindle-like cells were observed in all culture plates. Transcription factors and mesenchymal stem cell markers were positively observed in all three types of dental tissue-derived cells. However, the quantity of expressed transcription factors was most large in RAP-derived cells. In all three types of dental tissue-derived cells, osteogenic and adipogenic differentiations were observed after treatment of specific induction media. In vitro adipogenic differentiation was similar among these three types of cells. In vitro osteogenic differentiation was most strongly and frequently observed in the RAP-derived cells, whereas rarely osteogenic differentiation was observed in the DP-derived cells. Conclusion: These findings suggest that three types of human dental tissue-derived cells from extracted wisdom teeth were multipotent mesenchymal stem cells, have the properties of multi-lineage differentiations. Especially, stem cells from root apical papilla (SCAP) have much advantage in osteogenic differentiation, whereas dental follicle cells (DFCs) have a characteristic of easy adipogenic differentiation.