• Journal of the Korean Wood Science and Technology
• /
• 제14권1호
• /
• pp.3-44
• /
• 1986

목재(木材)파아티클과 성질(性質)이 전혀 다른 철선(鐵線)을 물리적(物理的)으로 결합(結合)시킴으로써 목재(木材)와 철재(鐵材)의 재료적(材料的) 특성(特性)을 서로 보완(補完)하여 목재(木材)파아티클과 철선(鐵線)의 새로운 복합체(複合體)인 목질(木質)-철선(鐵線)보오드를 제조(製造)하고 그 특성(特性)을 구명(究明)하여 기초자료(基礎資料)를 얻고자 하였다. 메란티 합판제조폐재(合板製造廢材)을 이용(利用)한 팔만칩을 12mesh를 통과하고 20mesh체에 남는 큰 파아티클과 20mesh을 통과하고 60mesh체에 남는 작은 파아티클로 구분하여 요소수지를 분무한 다음, 굵기 1mm인 철선(鐵線)을 나비방향과 길이방향으로 1, 2 및 3층(層)으로 배열하여 성형(成型)하고 시험용(試驗用) 복합(複合) 파아티클 보오드를 제조하였다. 1층(層) 철선구성(鐵線構成)보오드의 경우에는 철선간(鐵線間)의 배치간격(配置間隔)을 나비방향과 길이방향(方向)으로 각기 0.5cm, 1cm, 1.5cm, 2cm 및 2.5cm 등(等) 5가지로 하여 24가지의 철선구성방법(鐵線構成方法)으로 하였으며, 2층(層) 철선구성(鐵線構成 )보오드는 철선구성간격(鐵線構成間隔)을 1cm로 하였고 철선구성방법(鐵線構成方法)을 3가지로 하였으며, 3층(層) 철선구성(鐵線構成)보오드는 철선구성간격(鐵線構成間隔)을 1cm로 하고 철선구성방법(鐵線構成方法)을 11가지로 하여 제조(製造)한 보오드는 대조(對照)보오드를 포함(包含)하여 312개였다. 보오드를 성형(成型)한 열압온도(熱壓溫度) 160$^{\circ}C$, 악력(壓力) 35kgf/$cm^2$, 열압시간(熱壓時間) 9분(分)으로 하여 보오드를 제조(製造)하고 이 목질(木質) 철선복합(鐵線複合)보도드의 물리적(物理的) 및 기계적(機械的) 성질(性質)을 측정(測定)분석(分析)한 바 다음과 같은 결과(結果)를 얻었다. 1. 큰 파아티클과 작은 파아티클로 제조(製造)한 보오드에서 철선구성층수(鐵線構成層數) 및 구성철선(構成鐵線)의 수(數)가 많은 보오드일수록 그 비중(比重)은 컸었다. 2. 큰 파아티클로 제조(製造)한 보오드는 철선구성(鐵線構成)으로 인하여 두께팽창율(膨脹率)의 감소(減少)가 뚜렷하였으며 특히 철선구성층수(鐵線構成層數)가 많을수록 이 팽창율(膨脹率)은 더 개선되었다. 3. 큰 파아티클 및 작은 파아티클로 제조(製造)한 보오드 공(共)히 철선구성층수(鐵線構成層數)가 증가(增加)함에 따라 철선(鐵線)의 강도적(强度的) 특성(特性)이 파아티클 휨강도(强度) 성질(性質)을 보강(補强)하여 파괴계수(破壞係數), 탄성계수(彈性係數), 휨 극한하중(極限荷重) 일량(量) 등(等)이 개선(改善)되었으며, 2층(層) 및 3층(層) 철선구성(鐵線構成)보오드의 경우 보오드의 하층(下層)의 철선구성방향(鐵線構成方向)이 보오드의 길이방향(方向)과 일치(一致)하는 보오드가 특(特)히 큰 휨강도(强度) 향상(向上)을 보여 인장라미네이션을 얻었다. 4. 1층(層) 철선구성(鐵線構成)보오드는 철선구성간격(鐵線構成間隔)에 따른 개구면적(開口面積)과 파아티클의 크기에 따라 파괴계수(破壞係數), 탄성계수(彈性係數), 휨 극한하중(極限荷重) 일량(量) 등(等)이 다르게 나타났으나, 큰 파아티클로 제조(製造)한 보오드의 파괴계수(破壞係數)는 개구면적(開口面積)이 1.5~3$cm^2$이고, 나비 방향(方向)의 철선구성간격(鐵線構成間隔)이 1~2cm이면서 길이방향(方向)의 철선구성간격(鐵線構成間隔)이 1.5~2.5cm인 보오드가 높은 값을 나타냈고 작은 파아티클로 제조(製造)한 보오드의 파괴계수(破壞係數)는 개구면적(開口面積)이 0.5~1.5$cm^2$ 및 3.75~6.25$cm^2$이고 나비 방향(方向)의 철선간격(鐵線間隔)이 0.5cm이거나 2.5cm인 보오드가 높은 값을 나타냈다. 5. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 탄성계수(彈性係數)는 개구면적(開口面積)이 1.5~3$cm^2$이고 나비방향(方向) 및 길이방향(方向)의 철선구성간격(鐵線構成間隔)이 1~2.5cm에서 큰 값을 나타냈으며, 한편 작은 파아티클로 제조(製造)한 보오드의 탄성계수(彈性係數)는 개구면적(開口面積)이 0.75~1.25$cm^2$ 민 3~6.25$cm^2$이고, 나비방향(方向)의 철선구성간격(鐵線構成間隔)이 0.5 또는 2.5cm에서 큰 값을 나타내었다. 6. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 휨 극한하중(極限荷重) 일량(量)은 개구면적(開口面積)이 1~3$cm^2$인 보오드가 큰 값을 보였고, 작은 파아티클로 제조(製造)한 보오드의 경우의 그것은 철선(鐵線)의 개구면적(開口面積)이 좁은 것이 크게 나타났다. 7. 박리저항(剝離抵抗) 및 나사못보지력(保持力)은 큰 파아티클로 제조(製造)한 3층(層) 및 2층(層) 철선구성(鐵線構成)보오드에서 대부분(大部分) 대조(對照)보오드보다 큰 값을 보였으나 작은 파아티클로 제조(製造)한 보오드에서는 뚜렷한 경향이 없었다. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 박리저항(剝離抵抗) 및 나사못보지력(保持力)은 전체적으로 비슷한 수준(水準)을 보였고 작은 파아티클로 제조한 보오드에서는 개구면적(開口面積)이 증가(增加)함에 따라 박리저항(剝離抵抗)은 증가(增加)하고 나사못보지력(保持力)은 감소(減少)하는 현상(現象)을 보였다.

• Advances in pediatric surgery
• /
• 제8권2호
• /
• pp.143-155
• /
• 2002

설문 문항에 따라 심도 있는 토의가 진행된 내용을 요약 하면 다음과 같다. 문항 1의 영아 황달 환자의 감별진단을 위한 검사에 대한 토론에서 복부초음파검사가 과거에는 담즙정체 환자에서 선별검사 목적으로 시행되었으나 1992년 부터 일부에서는 좀 더 확실한 진단 방법으로 이용하려는 견해가 있음이 소개되었다. 또한 Triangular cord sign (TC sign)은 문맥 앞쪽에 있는 삼각형이나 띠 모양의 반사성 (echogenecity)을 나타낸다는 것과 이 반사성은 간문맥섬유화 종괴를 조영하는 것으로 이 반사성 두께가 2.5mm면 담도폐색증으로 진단할 수 있다고 하는 TC sign에 근거한 진단방침에 대한 논의가 있었으나, 아직은 충분히 검증된 방법으로 보기는 어렵다는 견해도 함께 제시되었다. 문항 8의 간문맥 부위의 시야를 좋게 하기 위한 토론에서는 소아의 복부는 좌우 옆으로 발달이 되어 간의 현수인대와 간의 좌우 삼각인대 (triangular ligament)와 낫인대 (falciform ligamnet)를 잘라내면 간이 쉽게 배 밖으로 나오게 돼며, 수술 시야가 양호해 진다는 의견이 제시되었다. 피부 절개선을 간의 가장자리 보다도 한 횡지 위 쪽으로 넣는 것과 간을 너무 당기면 하대정맥에 각이 져서 순환허탈이 올 수 있다는 점이 주의사항이라고 하였다. 문항 9 portal fibrous mass 의 절제범위에 대한 토론에서는 양쪽 외측에서 담즙 배출이 많이 되므로 가능하면 양쪽 외측으로 많이 나가야 되며 좌우 간동맥 안쪽으로 절제하고 뒤쪽은 문맥 분기 뒤쪽의 정상 간 표면이 나올 때까지 절제한다는 의견이 있었고, 외측으로 가는 범위는 혈관 밖에까지 가는 것이 좋으며 혈관 위에는 문합이 불가능하므로 장이 혈관을 overriding하도록 장을 그냥 씌우면 된다는 의견이 있었으나 반면 좌우 간동맥 사이의 간표면에서 절제하는 정도만 해도 최선이며 무리하다 오히려 간동맥에 손상을 주변 담도의 혈류가 차단되어 세담관 증식에 장애가 된다는 의견도 있었다. 확장절제를 위해 좌.우 간문맥 두번째 분지까지 절제하면 절제면이 약 3 cm 크기가 되고 그 부위에다 넓게 장문합을 하며, 절제 깊이는 간실질까지 들어가는 것을 피하기 위하여 fibrous mass 기저부를 일부 남기면서 간표면을 따라 조심스럽게 절제한다는 의견이 있었다. 이를 위해 retractor를 효과적으로 사용하면 간문맥 제2분지까지 접근 가능하므로 가능한 한 깊이 절제하는 것이 좋다고 하였으나 한편 담도폐색증에서는 혈관기형이 많이 동반되어 혈관손상 위험이 있으므로 몇 번째 분지까지 절제하여야하는가 보다는 위험하지 않을 정도로 외측으로 갈수 있는 데까지 가는 것이 좋다는 의견도 있었다. 일반적으로 Kasai 수술의 목적 'cure' 내지는 'improvement' 되는 것이라고 본다면, Kasai술식에서 fibrous mass를 공격적으로 절제해서 효과적인 담즙배액을 성취할 수 있는지, 또는 장기간 추적조사에서 정말 훨씬 좋은 결과를 얻을 수 있는지를 비교하여야 하므로 아직은 충분히 검정되지 않은 의견으로 보아야 한다는 견해도 제시되었다. 문항 13의 담도폐색증 수술 후 통상적으로 처방하는 약제의 복용기간은 회원마다 상당한 차이가 있었다. 즉, Ursodeoxycholic acid (우루사)는 한달에서 부터 2년까지 또는 더 오랜 동안 처방한다는 의견도 있었고, systemic antibiotics도 2주에서 2년까지 처방 기간이 다양하였으며, 스테로이드는 대부분 2 - 3주 사용하고 있다고 하였다. 본 조사 결과는 18개 병원에서 21년 동안 대한소아외과학회 회원들이 경험한 환자들의 병록지를 후향적으로 조사한 것을 분석한 것으로서 80년대 초반의 환자 증례는 매우 제한적 일 뿐만 아니라 많은 수의 기록지가 불충분하거나 일치되지 않은 기술로 인해 자료로서 한계가 있었다. 그럼에도 불구하고 본 조사에서 얻은 결과의 분석은 회원들의 수련 배경이나 진료 환경이 다를지라도 담도폐색증의 진단 및 치료에 있어서 기본 원칙에는 매우 일치된 시술이 진행되고 있음을 알 수 있다. 다만 수술 소견에 따른 담도폐색증의 분류나 조직학적 기술에서는 보완을 요한다고 하겠다. 따라서 이 결과를 외국의 통계분석과 비교하는 것보다는 회원들의 향후 진료와 전향적 연구에 참고가 될 수 있다는 것에 의미를 두고자 한다. 또한 담도폐색증이 매우 드문 질환임은 분명하나 전국적인 조사에서는 적지 않은 예가 모아질 수 있으므로 회원들이 동일한 등록지를 작성하여 시행되는 전향적 연구에서는 우리나라 담도폐색증에 대한 분류, 치료 성적, 예후 인자들도 더 정확한 결과를 얻을 수 있을 것이다. 이를 위해 본 조사에서 사용하였던 등록지를 약간 수정보완한 ‘담도폐색증 등록지’를 학회에서 향 후 전향적 연구를 위해 인정해주기를 제안하는 바이다 (Biliary Atresia Entry Forrn).

• 기록학연구
• /
• 제16호
• /
• pp.303-339
• /
• 2007

'일제강점하 강제동원 피해'라 함은 만주사변 이후 태평양전쟁에 이르는 시기에 일제에 의하여 강제동원 되어 군인 군속 노무자 위안부 등의 생활을 강요당한 자가 입은 생명 신체 재산 등의 피해를 말한다. 강제동원 피해 역사를 복원하기 위한 노력이 피해당사자, 유족, 시민단체, 학계 등에서 이루어져왔고, 그 결과 2004년 3일 5일 ${\ll}$일제강점하 강제동원피해 진상규명등에 관한 특별법${\gg}$ (2007년 5월 17일 일부 개정)이 제정 공포되었다. 이를 근거로 2004년 11월 10일 국무총리 소속으로 일제강점하 강제동원피해진상규명위원회(이하 강제동원위원회)가 발족하였고, 2005년 2월 1일부터 일제강점하 강제동원 피해의 진상을 규명하여 역사적 진실을 밝히는 것을 목적으로 업무를 수행하고 있다. 주요 업무는 강제동원 피해신고접수 및 피해신고조사(피해자 및 유족 심사 결정), 진상조사신청접수 및 진상조사, 진상조사 및 피해판정 불능에 관한 사항, 피해판정에 따른 호적정정, 강제동원 관련 국내외 자료수집 분석 및 보고서 작성, 유해발굴 및 수습 봉환, 사료관 및 추도공간 조성사업 등이다. 강제동원위원회는 피해조사 및 진상조사 업무를 위해 다양한 기록을 발굴 수집해 오고 있다. 여타 피해의 역사가 그러하듯이 이미 공개되었거나 새롭게 발굴되는 기록은 강제동원의 다양한 역사상을 확인하기 어려울 만큼 그 양이나 질에 면에서 부족하다. 피해의 역사에서 피해당사자의 이야기는 기록의 부재를 메우기도 하고, 기록 이상의 근거적 가치를 갖기도 한다. 강제동원위원회는 피해생존자와의 구술면담을 통해 다수의 구술자료를 생산하였고 조사업무에 활용하며 체계적인 관리방법을 토대로 관리하고 대중적인 활용까지 꾀하고 있다. 강제동원위원회의 구술자료는 생산 당시부터 철저한 기획에 의해 이루어졌고, 생산단계부터 관리와 활용의 편의성을 염두에 두고 디지털매체의 생산을 유도했다. 또한 조사업무 과정에서 생산되는 구술자료의 한계를 극복하기 위해 수차례 면담자 교육을 실시하고, 면담자로 하여금 구술당시의 상황을 면담일지로 남기도록 했다. 강제동원위원회는 소장 기록을 관리하는 별도의 기록관리시스템을 갖고 있지 않다. 디지털 아카이브는 피해 진상 관리시스템과 전자결재시스템을 통해 생산되어 관리되지 않는 생산 수집 기증 기록을 등록 검색하는 역할을 한다. 구술자료는 디지털 아카이브에 등록이 되어, 실물과 중복 보존되고 있다. 구술자료는 등록과 동시에 분류, 기술행위가 이루어지고 구술자료의 관리 아이디인 등록번호, 분류번호, 비치번호 등을 부여받게 된다. 강제동원위원회는 구술자료의 적극적인 활용을 위하여 구술기록집의 발간을 지속적으로 해오고 있고, 영상물 등의 제작을 계획하고 있다. 강제동원위원회의 구술자료는 정부차원의 조사 업무 과정에서 생산된 것이라는 한계, 예산부족이나 기록관리시스템 등의 부재 등을 넘어서 한시조직으로서 가능한 적극적인 방법으로 생산 관리 활용되고 있다. 축적된 구술자료는 향후 특별법에 규정되어 있는 대로 사료관 등이 건립된다면 대중 이용자들을 위해 더 체계적으로 관리 활용될 것이다.

• Asia Marketing Journal
• /
• 제14권2호
• /
• pp.177-207
• /
• 2012

문화예술상품은 일반 소비재와 달리 소비자의 가치인식에 따라 중요한 소비의 대상이 되기도 하고 그렇지 못할 수도 있는 특별한 상품이다. 물질적 소비재나 서비스 상품은 상품속성이 주는 물질적 및 비물질적 혜택을 상정하여 상품을 개발하고 그에 따른 마케팅전략을 수립하는 것이 효과적일 수 있다. 그러나 문화예술상품 소비는 소비자의 경험과 교육 등에 의해 형성된 문화예술에 대한 가치인식에 따라 소비추구혜택이 달라질 수 있고, 가치인식과 추구혜택은 문화예술상품의 속성을 선택하는 기준에 영향을 미칠 수 있을 것이다. 본 연구는 '문화예술상품에 대한 가치인식과 추구혜택에 관한 질적 연구'의 후속연구로서 질적 연구에서 나타난 개념구조를 바탕으로 문화예술상품에 대한 소비자의 가치인식 및 추구혜택과 상품속성의 하위차원을 규명하고, 수단-목적 사슬이론을 역으로 적용하여 문화예술상품에 대한 소비자의 가치인식이 추구혜택과 상품속성에 미치는 영향을 규명하고자 하였다. 그리하여 문화예술상품 생산 및 문화예술 정책기관과 문화예술을 활용하는 기업의 문화마케팅의 효율성을 제고하기 위한 실무적 시사점을 제시하고자 실시되었다. 10대 이상 50대 남녀 662명을 대상으로 자료를 수집하고 요인분석과 경로분석을 실시하였다. 예술상품에 대한 소비자의 가치인식과 추구혜택의 하위차원은 질적 연구 결과와 유사하게 나타났으며, 가치인식은 대부분 추구혜택을 매개로 하여 상품속성에 영향을 미치는 것으로 나타나 질적 연구결과와 마찬가지로 수단-목적사슬을 역방향으로 적용하는 것이 타당함을 입증하였다. 즉, 문화예술상품에 대한 소비자의 가치인식이 실제적 편익으로 구체화되고, 소비자는 이러한 추구혜택에 따라 상품속성의 중요도를 고려하여 구매의사를 결정하는 것으로 볼 수 있다. 본 연구는 문화예술상품에 대한 소비자의 가치인식을 긍정적으로 형성·강화시키는 것이 가장 중요한 소비 촉진 요인임을 입증하였으며, 문화예술상품 생산기관에서 소비자 중심의 상품개발과 기업의 효율적인 문화예술마케팅 전략을 개발하기 위한 소비자 정보와 실무적 시사점을 제시하였다. 또한 본 연구 결과는 국민의 삶의 질을 향상시키고자 하는 국가기관의 정책 수립을 위한 유용한 정보로 활용될 수 있을 것이다.

• 한국산림과학회지
• /
• 제52권1호
• /
• pp.58-71
• /
• 1981

충남(忠南) 전북지방(全北地方) 적송림(赤松林)의 천이과정(遷移過程)을 연구(研究)하기 위하여 솔잎혹파리의 피해지속기간(被害持續期間)에 따라 피해극기지(被害極基地) (5년전(年前)에 피해발생(被害発生))인 공주(公州)(A), 피해지속지(被害持續地)(10년전(年前)에 피해발생(被害発生))인 부여(扶餘)(B), 피해회복지(被害回復地)(20년전(年前)에 피해발생(被害発生))로서 고창지역(高敞地域)(C)을 조사지역(調査地域)으로 설정(設定)하고, 각(各) 조사지역별(調査地域別)로 환경요인(環境要因)과 식생상태(植生狀態)를 調査하여, 환경요인(環境要因)과 식생상태(植生狀態), 삼림군집(森林群集)의 비교(比較), 식물상(植物相)의 변화(変化) 등(等)을 분석(分析)한 결과(結果)를 요약(要約)하면 다음과 같다 1. 임분(林分)이 솔잎혹파리피해(被害)로 부터 회복(回復)되어 감에 따라 식생구성(植生構成)에 변화(変化)가 오고 대상수종(代償樹種)으로 발달(発達)된 참나무류(類)의 상대우점치(相対優点値)가 감소(減小)되었다. 그러나 본(本) 조사지역내(調査地域內)에서는 상수리나무의 상대우점치(相対優点値)가 다른 참나무류(類) 보다 높았다. 2. 솔잎혹파리피해(被害)가 지속(持續)됨에 따라 삼림군집(森林群集)의 종구성상태(種構成狀態)가 점차 다양(多樣)하여진다. 그후 피해(被害)가 회복(回復)됨에 따라 임분(林分)의 종구성상태(種構成狀態)는 단순화(单純化)되는 것으로 나타났다. 3. 상대밀도(相対密度) 및 상대우점치(相対優点値)의 상대치(相対値)에 의(依)한 식생천이(植生遷移)를 종합분석(綜合分析)한 결과(結果) 솔잎혹파리피해(被害)의 극심(極甚)에서 우점종(優点種)을 이루던 참나무류(類)가 피해(被害)로부터 회복(回復)되어감에 따라 그 값이 감소(減少)되고, 싸리류(類), 진달래류(類) 등(等)이 하층식생(下層植生)을 형성(形成)하는 삼림군집(森林群集)으로 변화(変化)하여 갔다. 4. 식생(植生)에 미친 토심(土深), 토양함수량(土壤含水量), 유기물함량(有機物含量), 그리고 유기물층(有機物層)의 두께는 본(本) 조사대상지(調査対象地)의 범위내에 있어서는 거의 같은 것으로 사료(思料)되었고 연평균강수량(年平均降水量)과 온도(温度)도 유사(類似)하였다고 본다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 미술자료
• /
• 제96권
• /
• pp.239-260
• /
• 2019

본 논고는 19세기 이후 형성된 서화(書畫)의 유통과 확산의 양상을 당시 활발히 제작된 장식병풍 중 하나인 <백선도(百扇圖)>의 예를 통해 살펴본 글이다. 백선도는 화면에 다양한 형태의 부채를 겹쳐서 배치하고 각각의 선면(扇面) 안에 여러 종류의 화제(畫題)를 그린 것을 말한다. 부채와 선면화(扇面畫)라는 소재는 이전부터 존재하였지만 장식용 회화의 소재로 등장한 것은 19세기 이후로, 호사취미 경향을 반영하여 주로 병풍(屛風)으로 활발히 제작되었다. 지난 2016년 국립중앙박물관 특별전 '미술 속 도시, 도시 속 미술'에서 독일로텐바움세계문화예술박물관 소장 <백선도>가 새로이 소개된 바 있다. 6폭으로 구성된 이 병풍에는 한 폭 당 5개 이상의 다양한 종류의 부채들이 등장하고 각 부채 면에는 단순히 채색한 것 뿐 아니라 다양한 화목(畫目)의 그림들이 남아있다. 무엇보다 이 작품을 주목해야 하는 것은 국립중앙박물관에 동일한 초본(草本)이 전하고 있기 때문이다. 19세기에 들어서면서 이전의 왕실이나 사대부들이 사적인 공간에서 향유하였던 서화(書畫)는 민간으로 확산되었고 시장을 통한 유통의 단계로 넓어졌다. 집안을 꾸미고 장식하는 풍조에 따라 화려한 장식그림들이 선호되었고, 한 폭에 다양한 형태의 화면과 다채로운 畫目(화목)의 그림을 그려 완성하는 백납도병풍 제작이 성행하였다. 로텐바움박물관 소장 한국 컬렉션의 상당수는 독일 주재 조선국 총영사이자 독일의 사업가였던 하인리히 콘스탄틴 에두아르 마이어(Heinrich Constantin Eduard Meyer, 1841~1926)의 수집품이다. 그는 1890년대 후반부터 1905년까지 조선과 독일을 오가며 다양한 유물들을 수집하여 독일에 돌아가 1909년까지 순차적으로 수집품을 로텐바움박물관에 전달하였으며, <백선도>도 그 중 하나이다. 새롭고 장식미가 돋보이는 <백선도>는 조선에 들어와 있던 외국인들의 이목을 집중시키기에 충분했을 것이다. 로텐바움박물관 소장 <백납도>는 제2폭의 뒷면에 "동현(銅峴)"이라는 지명이 적힌 종이조각이 거꾸로 붙어있어 흥미를 끈다. 동현은 지금의 서울 을지로 1가와 을지로2가 사이에 위치했던 곳이며, 조선시대에는 도화서(圖畫署)를 비롯한 혜민서(惠民署)·장악원(掌樂院) 등의 관청과 시전(市廛)이 있어 가내수공업이 성하던 지역이었다. 실제로 1900년대 초 이곳에는 서화를 유통하는 상점들이 자리잡고 있었기 때문에, 마이어가 수집했던 서화들의 구입처가 동현에 위치했었을 가능성은 매우 높다고 하겠다. 로텐바움박물관 소장 <백선도>는 총 6폭의 병풍으로, 1980년대에 한국 서화 소장품들을 수리하는 과정에서 현재의 모습을 갖춘 것으로 보인다. 국립중앙박물관 소장 <백선도 초본>은 1945년부터 1950년 사이 국립민족박물관에 입수된 작품이다. <백선도 초본>은 총 7점으로, 7점 중 6면 화면의 여백에 화면의 순서까지 정해져 있어 본래 총 8폭 병풍용 초본임을 알 수 있다. 한 화면에는 5개 이상의 다양한 접선(摺扇)과 단선(團扇)들이 배열해있는데, 작은 장식에서부터 부챗살의 문양까지 초본부터 사실적으로 묘사되었음을 볼 수 있다. 여기에 '석간주(石間朱)', '홍(紅)', '묵(墨)', '청(靑)' 등과 같이 부채에 들어갈 색 대부분을 지정하고, 빈 부채에는 '유(油)'라고 적거나 비워두었으며 이 중 10개의 부채에는 화훼초충도(花卉草蟲圖)나 고사인물도의 밑그림이 남아있다. 이를 실제 로텐바움박물관 소장 <백선도>와 비교하면 화면의 크기와 비례까지 정확하게 일치하고 있어, 초본의 매뉴얼을 그대로 따르고 있음을 보여준다. 이 작품의 펼쳐진 부채 면에는 산수, 고사인물, 화조, 영모, 초충, 어해 등 다양한 장르의 그림이 그려져 있는데 화접도(花蝶圖)나 어해도(魚蟹圖) 등은 19세기 유행하였던 소재로 당시 화단의 경향을 잘 보여준다. 이 작품에서 주목할 것은 김홍도(金弘道)의 전형적인 화풍을 연상시키는 장면들이 다수 포함되어 있다는 점이다. 이는 지금까지 알려진 백선도나 백납도에서는 찾아보기 어려운 특징이다. 서원아집도(西園雅集圖)는 상대적으로 제한된 작은 화면에 그려야 하는 백납도나 백선도의 특성상 잘 다루지 않는 소재로, 국립중앙박물관 소장 김홍도의 <서원아집도>병풍과 화면의 구성이나 화풍 모두 매우 흡사하다. 더구나 <백선도>병풍의 몇몇 장면은 김홍도의 작품 중에서도 1796년작 《병진년화첩(丙辰年畫帖)》과 유사한 화면들을 다수 발견할 수 있어 흥미롭다. <사인암(舍人巖)>과 흡사한 산수도(山水圖)를 비롯하여 <서원아집도>, <쌍치도(雙雉圖)> 등에서 김홍도 화풍을 연상시킨다. 따라서 부채 속 그림을 그린 인물은 김홍도 화풍의 영향을 받은 직업화가일 것으로 보이며, 작가는 《병진년화첩》을 직접 감상한 적이 있거나, 서화시장에 《병진년화첩》을 베껴 그린 부본(副本)이 유통되었을 가능성이 매우 높다. 현재까지 알려진 병풍으로 된 백선도는 10점 내외인 것으로 파악되며, 이 작품들을 비교해보면 화면의 구성이 부채 1개 정도 차이가 있거나 비례와 좌우가 바뀌었을 뿐 화면구성이 매우 유사함을 찾아볼 수 있다. 이처럼 일정한 패턴의 화면구성은 같은 시기 민간에서 성행한 책가도(冊架圖)에서도 찾아볼 수 있는 특징으로, 19세기 서화의 수요층이 넓어짐에 따라 세밀한 표현과 화려한 장식성이 요구되는 회화들의 대량 제작을 위한 초본이 존재했음을 보여준다. 특히 도안이 복잡하여 범본이 필요한 곽분양행락도나 요지연도, 백동자도, 해학반도도 등의 규모가 큰 장식병풍에서 적극 활용되었으며, 실제 남아있는 작품에서 몇 가지의 도상들이 반복하여 등장하고 있어 초본을 참고했던 흔적을 찾아볼 수 있다. 시장의 수요에 맞추어 대량 제작할 수 있는 초본 활용이 성행했던 당시의 경향은 화면을 다채로운 부채들로 채우고 그 부채 면에 각기 다른 그림을 그려야하는 백선도 제작에 있어서도, 초본을 요긴하게 사용했음을 보여준다. 더구나 테두리를 그은 후 다양한 화목의 그림을 담는 백납도에 비해 백선도는 다양한 형태의 부채들을 먼저 그려야하는 공정을 거쳐야 했기 때문에, 대량 제작이 어렵고 그만큼 남아있는 작품이 상대적으로 적은 원인으로 생각된다. 이처럼 로텐바움박물관 소장 <백선도> 병풍과 국립중앙박물관 <백선도 초본>은 새로운 화풍이 수용되어 시도되었던 조선 말기 화단의 경향을 잘 보여주는 예라 하겠다. 다수의 백선도들이 박기준의 작품과 유사한 화풍과 화면 구성 보이는 것에 비해, 김홍도의 영향이 분명히 드러나는 매우 이례적인 예라는 점에서 앞으로도 더욱 심층적인 분석이 요구되는 작품이다.

• 한국유통학회지:유통연구
• /
• 제15권3호
• /
• pp.71-110
• /
• 2010

본 연구에서는 항공권 예약 발권 웹사이트의 서비스 품질을 측정 뿐만 아니라 서비스 회복도 측정하고자 하였다. 또한 서비스 품질과 서비스 회복이 고객만족 및 충성의도에 미치는 영향관계를 실증하고자 하였다. 온라인 서비스 품질과 온라인 서비스 회복의 측정을 위해 Parasuraman, Zeithaml, & Malhotra(2005)가 개발한 E-S-QUAL과 E-RecS-QUAL을 사용했으며, 했다. E-S-QUAL은 온라인 서비스 품질을 측정하는 도구로써, 효율성, 시스템 이용가능성, 이행성, 프라이버시의 4개 차원 22개 항목으로 구성된다. E-RecS-QUAL은 온라인 서비스 회복을 측정하는 도구로써, 반응, 보상, 접촉의 3개 차원 11개 항목으로 구성된다. 실증분석을 위한 설문조사는 항공사나 여행사의 웹사이트를 통해 국내 외 항공권을 구입해 본 경험이 있는 소비자를 대상으로 실시하였는데, 총 400부가 회수되었고, 이 중 342부를 최종분석에 사용하였다. 실증분석을 위해 AMOS 7.0과 SPSS 15.0을 사용하였다. 먼저, SPSS 15.0을 사용하여, 요인점수를 이용한 회귀분석으로 가설검증을 한 결과, <가설 I-1, 2, 3, 4, II-1, 2, 3, III-1, IV-1>이 전부 채택되었다. 온라인 서비스 품질과 온라인 서비스 회복의 각 차원은 모두 전반적인 서비스 품질에 유의한 영향을 보였고, 전반적인 서비스 품질은 고객만족에 유의한 영향을 미쳤다. 마지막으로 고객만족 역시 충성의도에 유의한 영향을 미치는 것으로 확인되었다. 한편 AMOS 7.0을 사용하여 모형 분석을 하였는데, 모형의 적합도는 가설검증을 하기에 합당한 수치가 나왔다. 이를 토대로 가설검증을 한 결과, <가설 I-1, 3, II-1, 3, III-1, IV-1>은 채택되었고, <가설 I-2, 4, II-2>는 기각되었다. 이 결과는 Parasuraman et al.(2005)이 주장한 것처럼 E-S-QUAL을 나타내는 데는 요인점수를 이용한 회귀분석이 더 적합하다는 것을 보여주는 것이라고 판단된다. 이를 토대로 본 연구의 시사점을 정리하였다.