• 생물환경조절학회지
• /
• 제29권4호
• /
• pp.406-413
• /
• 2020

멜론(Cucumis melo L.)의 코이어 배지 수경재배 시 고품질 과실을 생산하기 위한 적정 착과 절위, 적심 절위 및 수확 시기를 구명하고자 하였다. 코이어 배지 슬라브(100 × 20 × 10cm)에 3주를 정식하였다. 양액은 야마자키 멜론 표준액을 이용하였고, 급액 농도는 '초기-중기(과실 비대기)-후기'의 생육 단계별로 1.8-2.0-2.3dS·m^-1 공급하였다. 착과 및 적심 절위 실험은 '피엠알달고나'와 '얼스아이비' 2품종을 이용하였다. 착과 절위 실험은 8-10, 11-13 및 14-15 마디에 각각 3처리하였다. 적심 절위 실험은 18, 21 및 24 마디에 각각 3처리하였다. 과실 수확시기 실험은 '피엠알달고나'와 '얼스크라운' 2품종을 이용하여 착과 45일, 50일, 55일 및 60일 후로 4처리하였다. '피엠알달고나' 품종에서 11-13마디 이상 착과 시, 엽폭28.2cm, 엽면적은 10,845㎠로 가장 컸다. 줄기 길이는 '얼스아이비' 품종에서 11-13마디 착과 시 147.6cm로 가장 길었다. 과중은 '얼스아이비' 품종에서 11-13마디 착과시 2.0kg으로 가장 컸다. 과실의 가용성 고형물 함량(SSC)은 '피엠알달고나' 품종에서 8-10 마디 착과시 14.5°Brix, 24 마디 적심시 14.0°Brix로 각각 유의성 있게 가장 높았다. 착과 절위가 낮아질수록 SSC값이 증가하는 경향이 두 품종에서 동일하게 나타났다. '피엠알달고나'와 '얼스크라운' 2품종 모두 착과 55-60일 후 수확된 과실의 SSC 값과 과중이 가장 우수하였다. 종합적으로 검토하면 대부분 SSC값은 착과 절위가 낮아지고 적심 절위가 높아질수록 증가하고, 과중은 착과 절위가 높아질수록 증가하는 경향을 보였다. 착과 후 일수가 증가할수록 과실의 SSC값이 증가하였으며 다양한 품종에 대한 추가 연구가 더 필요하다고 생각되었다. 따라서 코이어 배지를 이용한 수경재배 시 멜론 품종 별로 특성을 잘 파악하여 착과 절위, 적심 절위 및 과실 수확시기를 설정하여야 한다.

• Structural Engineering and Mechanics
• /
• 제59권6호
• /
• pp.1139-1153
• /
• 2016

Elastic constraints are usually simplified as "spring forces" exerted on beam ends without considering the "spring deformation". The partial differential equation governing the free vibrations of a cantilever Bernoulli-Euler beam considering the deformation of elastic constraints is firstly established, and is nondimensionalized to obtain two dimensionless factors, $k_v$ and $k_r$, describing the effects of elastically vertical and rotational end constraints, respectively. Then the frequency equation for the above Bernoulli-Euler beam model is derived using the method of separation of variables. A numerical analysis method is proposed to solve the transcendental frequency equation for the continuous change of the frequency with $k_v$ and $k_r$. Then the mode shape functions are given. Finally, effects of $k_v$ and $k_r$ on free vibration characteristics of the beam with different slenderness ratios are calculated and analyzed. The results indicate that the effects of $k_v$ are larger on higher-order free vibration characteristics than on lower-order ones, and the impact strength decreases with slenderness ratio. Under a relatively larger slenderness ratio, the effects of $k_v$ can be neglected for the fundamental frequency characteristics, while cannot for higher-order ones. However, the effects of $k_r$ are large on both higher- and lower-order free vibration characteristics, and cannot be neglected no matter the slenderness ratio is large or small.

• 한국건설관리학회논문집
• /
• 제25권5호
• /
• pp.41-54
• /
• 2024

본 연구에서는 프리캐스트 콘크리트(Precast Concrete; PC) 제작공장의 원자재 재고관리를 위한 세 가지 재고관리 정책, 정량 발주 방식, 정기 발주 방식, (s, S) 발주 방식의 성능을 비교·분석한다. 보다 현실적인 결론의 도출을 위해, 복수 원자재를 사용하는 PC 제작공장의 전체 공정을 대상으로 원자재 수요 및 공급 측면의 변동성을 고려하여 개발된 성능평가 도구인 ARENA 시뮬레이션 모델을 활용하였다, 성능 비교를 위해, 먼저 세 가지 재고관리 정책에 대해 경제적주문량(Economic Order Quantity; EOQ)을 초깃값으로 하여 OptQuest를 통해 재주문점, 주문량, 목표수준 및 주문주기 모수를 최적화하였다. 최적화 결과, 수요 및 공급 측면의 변동성을 고려하지 않는 EOQ 방식에 비해 재고관리 비용을 평균 97.28% 감소시킬 수 있었다. 이후, 프로젝트 발생 주기, 원자재 조달기간, 단위 품절비용 등 세 가지 영향 요인을 설정한 후 세 가지 재고관리 정책에 대한 성능 비교 실험을 수행하였다. 실험 결과, 실시간 또는 매일 재고수준을 파악하여 주문 시점을 결정하는 정량 발주 방식과 (s, S) 발주 방식의 재고관리 비용이 고정 주문주기를 갖는 정기 발주 방식보다 각각 30.6%와 27.9% 낮게 나타났다. 또한, 재고관리 비용은 프로젝트 발생 주기를 제외한 원자재 조달기간과 단위 품절 비용 요인에 의해 영향을 받는 것으로 나타났지만, 그 차이는 2.17%와 2.09%로 수요 및 공급의 변동성 대응을 위한 모수 최적화 과정으로 인해 크지 않았다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권3호
• /
• pp.109-114
• /
• 2018

In order to improve performance for the size of the BLPD, the CCL is used for the realization as the delay line. As realizing lower coupling coefficient and lower characteristic impedance, the CCL has good performance of the phase delay. The CCL is applied as the compact BLPD with optimized coupling factor and matched impedance because the lower coupling coefficient and lower characteristic impedance are increased the size and the loss, respectively. Designed BLPD using the CCL has the size of $0.13{\lambda}_g{\times}0.13{\lambda}_g$ and the size-reduction ratio of fabricated BLPD using the CCL has 58.5% ($21.08{\times}21.40mm^2$). Also, fabricated BLPD is measured the insertion loss of 3.16dB at the center frequency of 1.78GHz and the 20dB bandwidth is 9.58%. Differenced magnitude and phase between threw port and coupled port are measured 0.1dB and $89.9^{\circ}$, respectively. These performances are almost same compared with the conventional BLPD. Suggested application of the CCL can be used various devices and circuits for the size-reduction.

• 한국초지조사료학회지
• /
• 제16권4호
• /
• pp.307-314
• /
• 1996

An experiment was carried out to determine effect of cultivar and preservative on the characteristics and quality of baled oat(Avena sativa L.) hay after 60 days of storage. Ihe main plots consisted of the cultivars such as 'Foothill' and 'Swan', and the subplots consisted of preservatives such as commercial propionic acid(CA), lactic bacteria inoculant(LB) and control(C0). Bale temperature of 'Foothill' oat hay maintained higher than that of 'Swan' oat hay during storage. Bale temperature of oat hay treated with CA remained lowest during the earlier storage period and no significant difference was found among preservatives during the latter storage period. Visual assessment of bale of 'Swan' oat hay was better in the evaluation of mold, odor and color than that of 'Foothill' oat hay after storage. DM content of Foothill oat hay increased markedly than that of 'Swan' oat hay through the storage period. CFU(Colony fodng unit) of total viable micmrganism of oat hay bales was not quite different between preservatives, but that of lactic bacteria of 'Swan' oat hay and 'Foothill' was different by over 16 and lo4, respectively. Total nitrogen content of 'Swan' and 'Foothill' oat hay was 1.45 and 2.22%, respectively(P<0.05) and effect of preservatives on total N content was higher in the order of LB, CA, and CO. ADIN content of 'Swan' was lower than that of 'Foothill'(P

• 건축역사연구
• /
• 제17권2호
• /
• pp.83-102
• /
• 2008

In the book of , it is recorded that the names of ingressive stone stairs to the main shrine were Cheongwoongyo(blue cloud bridge) and Baekwoongyo(white cloud bridge) and the names of stairs to the paradise hall were Yeonwhagyo(lotus bridge) and Chilbogyo(seven treasure bridge). But, the ingressive stone stairs to the main shrine and the paradise hall are single consecutive stairs with 2 levels respectively. Because of this, it is rather hard to clearly designate the names to the upper level and the lower level stairs. But, of the stairs to the Paradise hall, the lower stairs have a carving of lotus, and the upper stairs have seven stairs. In this aspect of artifacts, we can safely assume that the upper stairs are Chilbogyo and the lower are Yeonwhagyo. But, for the ingressive stairs to the main shrine, there is no such artificial hint. So, it is difficult to designate the upper and the lower stairs for the two bridges. Especially, it is not clear whether the descriptive order of "lower stairs upper stairs" in the names of Yeonwhagyo and Chilbogyo can be applied to the names of stairs to the main shrine. It is because the general descriptive order is "upper lower" rather than "lower upper." Even though there have been many studies on the Bulguksa temple, the study on the ingressive stone stairs to the main shrine has not made till now. Therefore, the study on the position of Cheongwoongyo and Baekwoongyo stairs can have its validity. In this paper, the positional approach to Cheongwoongyo and Baekwoongyo has been made in following aspects: First, the temple structure of Bulguksa; Second, the five element theory of oriental philosophy and the Book of Changes; Third, the directional consciousness of Buddhism. Through the aspects, the validity of up-down position of Cheongwoongyo and Baekwoongyo has been sought. In this research, it can be concluded that the upper level of ingressive stone stairs to the main shrine of Bulguksa is Cheongwoongyo and the lower level is Baekwoongyo. When considered in the Buddhist directional consciousness, it forms the total structure of "East-Cheongwoongyo South- Baekwoongyo West-Yeonwhagyo North-Chilbogyo."

• Journal of Preventive Medicine and Public Health
• /
• 제15권1호
• /
• pp.219-228
• /
• 1982

This study aimed at assessing the industrial workers' mental health status and identifing the relationship between mental health status and socio-demographic variables. We administered psychiatric self report rating scale (SCL-90)to 622 manual workers and 191 office workers in a textile .industry. The study began on 1 November, 1981 and lasted for 30 days The results were as follow: 1. Scores of symptom dimension were higher in female rather than male, younger than older, lower income group than higher one, lower educated group than higher one, manual workers than office workers and unmarried group than married one respectively. 2. The result of dimension scores of total samples showed that the score of Obsessive-compulsive scale was highest. The rest symptom dimension showed the order as follows: Interpersonal sensitivity, Depression, Hostility, Anxiety, Paranoid ideation, Somatization, Psychoticism and Phobic anxiety. 3. In order to identify the partial contribution of each socio-demographic variables on the mental health, multiple regression method was applied, and the result was as follows. 1) Sex was the most important one to explain the Somatization, Phobic-anxiety and Psychoticism scales among the 7 variables in the multiple regression equation. 2) Economic status was the most important variable to explein the Obsessive-compulsive, Depression and Hostility scales. 3) Marital status was the most important variable to explain the Interpersonal-sensitivity and Paranoid ideation scales.

• Journal of Biosystems Engineering
• /
• 제20권3호
• /
• pp.205-216
• /
• 1995

A fast and inexpensive approximate analysis method to predict power output characteristics of the Stilting engines in a preliminary design stage was investigated. In basic equations proposed by Walker, typical temperatures of working fluids in expansion and compression spaces were treated as those of working fluids in heater and cooler respectively. While the temperature of working fluid in the expansion space was actually lower than that of working fluid in the heater, the temperature of working fluid in the compression space was higher than that of working fluids in the cooler. In this paper, the working fluid temperature of expansion space was treated as lower than the heater temperature and that of compression space was treated as higher than the cooler temperature. Also, according to them, the power output characteristics of the Stirling engine were evaluated with respect to the GPU-3 and 4-215 Stilting engines. The following conclusions were drawn from the analysis. 1. Using the available experimental data from the GPU-3 Stirling engine, it was shown that the approximate analysis predicts the brake power with a maximum error of 19 percent at 1, 000rpm and with a minimum error of 3 percent at 2, 000rpm. 2. The approximate analysis data which for the GPU-3 Stirling engine were much closer to the experimental data than those of adiabatic 2nd order and 3rd order analysis within 1, 500rpm to 2, 500rpm. 3. The approximate analysis data which for the GPU-3 and 4-215 Stilting engines were much closer to the experimental data than those of the Beal number analysis.

• 생명과학회지
• /
• 제10권4호
• /
• pp.326-332
• /
• 2000

In order to investigate the possibility of functional property improvement of meat products, four kinds of pork patties were prepared with water 10% as control, mugwort extract 10%, pine needle extract 10% and fatsia leaf extract 10%, respectively. In case of control moisture content was higher, but crude fat was lower, compared to patties treated with plant extracts. Crude ash content of pine needle extract treatment showed higher level than that of other patties. pH range of patties revealed to 5.92∼5.978. In raw patties Hunter's L-and a-value of control were higher than those of plant extract treatment, and a-value of raw patties showed higher level than that of cooked. Yield, water holding capacity, salt soluble protein extractability and gel strength among patties did not show significant differences. In control patty, fat retention was lower compared to other plant extract treatments, but water soluble protein extractability was higher compared to pine needle. Values such as hardness, springiness, cohesiveness, gumminess and chewiness were not significantly different among the patties. In sensory scores such as aroma, juiciness and palatability, significant differences were not observed among cooked patties, but texture score was higher in the order pine needle, mugwort, fatsia leaf and control.

• International Journal of Computer Science & Network Security
• /
• 제21권9호
• /
• pp.179-184
• /
• 2021

In our study we performed a sentiments analysis from the images. For this purpose, we used 153 images that contain: people, animals, buildings, landscapes, cakes and objects that we divided into two categories: images that suggesting a positive or a negative emotion. In order to classify the images using the two categories, we created two models. The SAI-G model was created with Google's AutoML Vision service. The SAI-C model was created on the Clarifai platform. The data were labeled in a preprocessing stage, and for the SAI-C model we created the concepts POSITIVE (POZITIV) AND NEGATIVE (NEGATIV). In order to evaluate the performances of the two models, we used a series of evaluation metrics such as: Precision, Recall, ROC (Receiver Operating Characteristic) curve, Precision-Recall curve, Confusion Matrix, Accuracy Score and Average precision. Precision and Recall for the SAI-G model is 0.875, at a confidence threshold of 0.5, while for the SAI-C model we obtained much lower scores, respectively Precision = 0.727 and Recall = 0.571 for the same confidence threshold. The results indicate a lower classification performance of the SAI-C model compared to the SAI-G model. The exception is the value of Precision for the POSITIVE concept, which is 1,000.