• Korean journal of food and cookery science
• /
• v.28 no.2
• /
• pp.97-110
• /
• 2012

The purposes of this study were to examine the levels of job stress and job burnout perceived by nutrition teachers and dietitians in school foodservice in Gyeongsangnam province and to analyze job stress factors affecting job burnout. A total of 270 questionnaires were distributed from December 10 to 29, 2010 and 252 were returned (response rate : 93.3%). A total of 245 were used in the final analysis (usage rate : 90.7%), excluding seven improper questionnaires. The results of this study were as follows : 100% of the respondents were women, and their mean age was 38. 60% were nutrition teachers and 40% were dietitians. The level of job stress and job burnout of the respondents were 2.89 points (on a 5-point Likert scale) and 3.70 (on a 7-point Likert scale), respectively. In regard to job stress factors, job demand (3.97) recorded the highest scores, followed by organizational system (2.99), lack of reward (2.85), interpersonal conflict (2.69), job insecurity (2.63), organizational climate (2.63), and insufficient job control (2.45) in that order. Exhaustion burnout (4.60) recorded the highest points among job burnout factors, followed by cynicism (3.46), and professional efficacy (3.04) in that order. Job stress factors affecting job burnout were organizational system (p<.001), job insecurity (p<.001), lack of reward (p<.001), and organizational climate (p<.01). In conclusion, it is necessary to provide human resources management strategies to lower job demand and workload in order to reduce job stress and job burnout for dietitians and nutrition teachers in school foodservice.

• Korean Journal of Radiology
• /
• v.22 no.11
• /
• pp.1797-1808
• /
• 2021

Objective: To determine whether volumetric CT texture analysis (CTTA) using fully automatic tumor segmentation can help predict recurrence-free survival (RFS) in patients with intrahepatic mass-forming cholangiocarcinomas (IMCCs) after surgical resection. Materials and Methods: This retrospective study analyzed the preoperative CT scans of 89 patients with IMCCs (64 male; 25 female; mean age, 62.1 years; range, 38-78 years) who underwent surgical resection between January 2005 and December 2016. Volumetric CTTA of IMCCs was performed in late arterial phase images using both fully automatic and semi-automatic liver tumor segmentation techniques. The time spent on segmentation and texture analysis was compared, and the first-order and second-order texture parameters and shape features were extracted. The reliability of CTTA parameters between the techniques was evaluated using intraclass correlation coefficients (ICCs). Intra- and interobserver reproducibility of volumetric CTTAs were also obtained using ICCs. Cox proportional hazard regression were used to predict RFS using CTTA parameters and clinicopathological parameters. Results: The time spent on fully automatic tumor segmentation and CTTA was significantly shorter than that for semi-automatic segmentation: mean ± standard deviation of 1 minutes 37 seconds ± 50 seconds vs. 10 minutes 48 seconds ± 13 minutes 44 seconds (p < 0.001). ICCs of the texture features between the two techniques ranged from 0.215 to 0.980. ICCs for the intraobserver and interobserver reproducibility using fully automatic segmentation were 0.601-0.997 and 0.177-0.984, respectively. Multivariable analysis identified lower first-order mean (hazard ratio [HR], 0.982; p = 0.010), larger pathologic tumor size (HR, 1.171; p < 0.001), and positive lymph node involvement (HR, 2.193; p = 0.014) as significant parameters for shorter RFS using fully automatic segmentation. Conclusion: Volumetric CTTA parameters obtained using fully automatic segmentation could be utilized as prognostic markers in patients with IMCC, with comparable reproducibility in significantly less time compared with semi-automatic segmentation.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.227-234
• /
• 1977

The reaction of phenylhydrazine with bromine in sulfuric acid solution has been studied kinetically. The pseudo-second-order rate constant is approximately inversely proportional to hydrogen-ion concentration when the concentration of sulfuric acid is lower than 1M. arom the study of the effect of potassium bromide concentration on the rate constant, it is concluded that both neutral bromine and tribromide ion participate in the reaction, the rate constants in 0.01M $H_2SO_4$ being $5{\times}10^5M^{-1},sec^{-1}\;and\;0. 7{\times}10^5M^{-1},sec^{-1}$, respectively at $20^{\circ}C$. The pseudo-second-order rate constant of 2.4-dinitrophenylhydrazine-bromine reaction is independent of hydrogen ion concentration. From the KBr addition experiment, the rate constants for $Br_2\;and\;Br_3^-$ were obtained as $1.2{\times}10^5M^{-1},sec^{-1}\;and\;2.0{\times}10^4M^{-1},sec^{-1}$, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.9
• /
• pp.1289-1294
• /
• 2013

This study evaluated the in vitro effect of medicinal plant extracts on ruminal methanogenesis, four different groups of methanogens and ruminal fermentation characteristics. A fistulated Holstein cow was used as a donor of rumen fluid. Licorice and mugwort extracts (Glycyrrhiza uralensis and Artemisia capillaris, 0.5% and 1% of total substrate DM, respectively), previously used as folk remedies, were added to an in vitro fermentation incubated with buffered-rumen fluid. Total gas production in Glycyrrhiza uralensis extract treatment was not significantly different between treatments (p<0.05) while total gas production in the Artemisia capillaris extract treatment was lower than that of the control. Artemisia capillaris extract and Glycyrrhiza uralensis extract reduced $CH_4$ emission by 14% (p<0.05) and 8% (p<0.05), respectively. Ciliate-associated methanogens population decreased by 18% in the medicinal plant extracts treatments. Medicinal plant extracts also affected the order Methanobacteriales community. Methanobacteriales diversity decreased by 35% in the Glycyrrhiza uralensis extract treatment and 30% in the Artemisia capillaris extract treatment. The order Methanomicrobiales population decreased by 50% in the 0.5% of Glycyrrhiza uralensis extract treatment. These findings demonstrate that medicinal plant extracts have the potential to inhibit in vitro ruminal methanogenesis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.793-799
• /
• 2002

Four feeds, three concentrates (rice bran, soybean meal and flaked corn) and one forage (corn silage) were incubated in four ruminally fistulated Holstein steers over three one week periods in a 3${\times}$4 incomplete latin square design where steers served as blocks and feeds as treatment. The objectives of the study were to investigate in situ DM, N and P degradability characteristics of feeds in order to assess availability of these nutrients by ruminants. In each period, all feeds were incubated in quadruplets (corn silage in triplicates) in the rumen of each steer in a reverse order for 3, 6, 9, 12, 18, 24 and 48 h. The DM 'a' fraction was higher and lower (p<0.001) in corn silage and rice bran respectively. Although corn silage contained the lowest (p<0.01) DM 'b' fraction, flaked corn contained the highest. Rate of DM degradation of flaked corn and corn silage were half (p<0.05) of the rate of DM degradation of either rice bran or soybean meal. Potential or effective DM degradability (p<0.05 to 0.001) at various passage rates were the lowest for rice bran and the highest for soybean meal. Corn silage N 'a' and 'b' was the highest and lowest, respectively (p<0.01). N 'c' of corn silage and rice bran was higher (p<0.001) than other feeds. Potential N degradability was the lowest in flaked corn (p<0.05). P 'a' was high (p<0.01) for corn silage and rice bran. P 'b' fraction was very high (p<0.001) in soybean meal but was absent in corn silage. Availability of DM (p<0.01 or 0.001), N (p<0.001) and P (p<0.05) differed between feeds at various passage rates except P availability at k=0.02 per h (p>0.05). The results demonstrate that the availability of DM, N and P by ruminants depends on feed as well as categories of animal.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.96-101
• /
• 2005

Magnesium alloys have been widely used for many structural components of automobiles and aircraft because of high specific strength and good cast ability in spite of hexagonal closed-packed crystal structure of pure magnesium. In this study, uniaxial tension tests at high temperature and creep tests are done in order to investigate the characteristics of high temperature and mechanisms for creep deformation of AZ31 Mg alloy. Yield stress and ultimate tensile stress decreased with increasing temperature, but elongation increased from results of uniaxial tension test at high temperature. The apparent activation energy Qc, the applied stress exponent n and rupture life have been determined during creep of AZ31 Mg alloy over the temperature range of 473K to 573K and stress range of 23.42 MPa to 93.59 MPa, respectively, in order to investigate the creep behavior. Constant load creep tests were carried out in the equipment including automatic temperature controller, whose data are sent to computer. At around the temperature of $473K{\sim}493K$ and under the stress level of $62.43{\sim}93.59%MPa$, and again at around the temperature of $553K{\sim}573K$ and under the stress level of $23.42{\sim}39.00MPa$, the creep behavior obeyed a simple power-law relating steady state creep rate to applied stress and the activation energy for the creep deformation was nearly equal, respectively, and a little low to that of the self diffusion of Mg alloy including aluminum. Also rupture surfaces at high temperature have had bigger dimples than those at lower temperature by SEM.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.43-53
• /
• 1984

The purpose of this study was to suggest the use of laser energy in the the field of operative dentistry without considerable pulpal damage and significant effects on the dental hard tissue, additionally to find out the methods which could control the temperature rise. The laser beam (CW $CO_2$ laser, output: 6W, beam diameter: 1.5mm) was focused on the center of the occlusal surface of extracted lower molars. A Ge lens (focal length 200mm) was used to focus the primary laser beam. In order to vary the total amount of the same irradiated energy, experimental subjects were devided into three groups: continuously irradiated group, intermittently irradiated group, and water-cooled group after continuous laser irradiation. Temperature changes in the pulp chamber after laser irradiation were measured and recorded by the digital thermometer and recorder. The following results were obtained: 1. Temperatures in the pulp chamber were raised up in the order of the continuously irradiated group, intermittently irradiated group, water-cooled group after continuous laser irradiation. 2. In the continuously irradiated group, the temperature was raised up $1.7^{\circ}C$, $3.8^{\circ}C$, $7.3^{\circ}C$, $17.2^{\circ}C$ after 2, 4, 8, 16 seconds of the irradiation of laser. In the intermittently irradiated group, the changes were $1.2^{\circ}C$, $3.4^{\circ}C$, $6.3^{\circ}C$, $11.1^{\circ}C$, respectively. In the water-cooled group after continuous laser irradiation, the changes were $0.0^{\circ}C$, $0.8^{\circ}C$, $1.6^{\circ}C$, $6.9^{\circ}C$, respectively. 3. The starting time of temperature rise in the pulp chamber had no connection with laser irradiation time.

• Journal of Environmental Science International
• /
• v.16 no.11
• /
• pp.1225-1230
• /
• 2007

The emissions characteristics of particulate matters(PM) according to the types of wastes from industrial waste incinerator of 800 kg/hr treatment capacity were investigated. For this study, the incinerate waste are as follows; waste resin, waste wood, waste urethane, waste gunny, and waste paper. The particulate samples were collected to be emitted in stack and air pollution control(both cyclone and bag filter). In stack, the concentrations of PM were in the range of 2.61 to $26.51 mg/Sm^3$ and the major chemical species were C, Si, Cl, K, Na, Ca in all the wastes. In cyclone fly ash, the mean content of heavy metal were in the order of Fe > Zn > Pb > Cu > Mn > Cr > Ni > Cd > As > Hg and the heavy metal content of waste resin were Zn 34,197.5 mg/kg, Fe 27,587.6 mg/kg, Pb 6,055.8 mg/kg, respectively. In bag filter fly ash, the mean content of heavy metal were in the order of Zn > Pb > Fe > Cu > Mn > Cd > Cr > Ni > As > Hg and the heavy metal content of waste wood were Pb 36,405.2 mg/kg, Fe 15,762.9 mg/kg, Cu 9,989.5 mg/kg, Cd 2,230.1 mg/kg, respectively. Comparing the heavy metal content of both cyclone and bag filter, in cyclone, the Cr, Fe, Ni content were higher than in bag filter and the Cd, Cu, Hg content were lower than in bag filter.

• Nutrition Research and Practice
• /
• v.12 no.2
• /
• pp.149-159
• /
• 2018

BACKGROUND/OBJECTIVES: College students are in transition from adolescence to adulthood, and it has been reported that they show poor dietary habits. This study was conducted to compare body image perception, nutrition knowledge, dietary attitudes, dietary habits, and health-related lifestyles between Korean college students (KCS) and Mongolian college students (MCS). SUBJECTS/METHODS: Subjects were 314 KCS and 280 MCS. The data includes results of self-administered questionnaires; statistical analysis was performed using the SPSS 23.0 program. RESULTS: With regards to body image perception, KCS perceived themselves to be fatter on current body image than ideal body image compared to MCS; 64.0% of KCS and 34.6% of MCS desired to be thinner. Total score of nutrition knowledge in KCS (17.0) was significantly higher compared to MCS (8.4) (P < 0.001), but total score of dietary attitudes in KCS (27.0) was significantly lower compared to MCS (31.2) (P < 0.001). Nutrition knowledge had a significantly positive correlation with dietary attitudes in MCS (P < 0.01). Meal consumption among male and female subjects was 2 and 3 times, respectively, in order in KCS, and 3 and 2 times, respectively, in order in MCS (P < 0.001). Rate of skipping breakfast in both genders was significantly higher in KCS than in MCS (male: P < 0.05, female: P < 0.001). In health-related lifestyles, KCS had a significantly higher rate in frequency of alcohol drinking (P < 0.001), exercise (P < 0.01), and mobile phone usage (P < 0.001), compared to MCS. CONCLUSIONS: This study suggests that development of nutrition education program which is effective and proper is required to improve healthy dietary habits among college students of both countries. Essential contents should include acquirement of nutrition knowledge and a motivation for its application to actual life for KCS, and improvement of healthy dietary habits for MCS.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.707-714
• /
• 2016

In order to prevent secondary pollution of tap water, corrosion characteristics are investigated, and corrosion index are calculated using LI and LR to manage corrosiveness. As targeted water treatment plants from 2014 (July, once) to 2015 (July and October, 2 times), 70 plants are selected by making a division for each area and water system. (treated water samples, n=240, raw water samples, n=72). In result of pH analysis, treated water was lower than raw water to 7.12, and 7.29, respectively. LI were investigated in the order of Seomjin river, Nakdong river, Han river, Geum river, to -2.08, -1.24, -1.11, -1.10 (at raw water), and -2.18, -1.59, -1.51, -1.35 (at treated water), respectively. In case of water quality goal value (LI = -1) in Japan as control of corrosiveness, management object was investigated about 83.3%.