• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.100-103
• /
• 2003

본 논문에서는 2.4GHz 대역의 근거리 무선 통신에 사용되는 역-F형 내부 안테나의 설계 값에 따른 안테나 특성을 분석하였다. PCB 기판에 인쇄된 형태로 설계하여 안테나의 길이, 단락 스터브의 두께, 피드선과 단락 스터브 사이의 간격, 안테나와 그라운드 사이의 간격, 안테나의 두께 및 기판의 두께와 기판의 유전율에 따른 특성 변화를 연구하였다. 설계값에 따른 특성변화 그래프로부터 설계값을 튜닝하여 최적의 안테나를 설계하는 방법을 보였다. 설계된 안테나는 VSWR이 1.5이하인 주파수 대역폭이 6.3%, 이득 3dB 정도를 얻었다.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.55-60
• /
• 2003

We designed and constructed integrated 3-channel flux-locked-loop (FLL) electronic system for the control and readout of high-T$_{c}$ SQUIDs. This system consists of low noise preamplifiers, integrators, interface circuits, and software. FLL operation was carried out with biased signals of 19 KHz modulated current and 150 KHz modulated flux, which are reconstructed as detected signals by preamplifier and demodulator. Computer controlled interface circuits regulate FLL circuit and adjust SQUID parameters to the optimum operating condition. The software regulates interface circuits to make an auto-tuning for the control of SQUIDs, and displays readout data from FLL circuit. 3-channel SQUID electronic system was assembled with 3 FLL-interface circuit boards and a power supply board in the aluminum case of 56 mm ${\times}$ 53 mm${\times}$ 150 mm. Overall noise of the system was around 150 fT/(equation omitted)Hz when measured in the shielded room, 200 fT/(equation omitted)Hz in a weakly shielded room, respectively.y.

• Wind and Structures
• /
• 제7권4호
• /
• pp.235-250
• /
• 2004

The current study reports the results of an experimental program conducted on a structure fitted with a liquid damper (TLD) and subjected to harmonic excitation. Screens were placed inside the TLD to achieve the required inherent damping. In the first part of the study, reduced scale models of the building-TLD systems were tested under two levels of excitation. The efficiency of the damper was assessed by evaluating the effective damping provided to the structure and comparing it to the optimum effective damping value, provided by a linear tuned mass damper (TMD). An extensive parametric study was then conducted for one of the three models by varying both the excitation amplitude and the tuning ratio, defined as the ratio of the TLD sloshing frequency to the natural frequency of the structure. The effectiveness and robustness of a TLD with screens were assessed. Results indicate that the TLD can be tuned to achieve a robust performance and that its efficiency is not significantly affected by the level of excitation. Finally, the equivalent amplitude dependent TMD model, developed in the companion paper is validated using the system test results.

• Wind and Structures
• /
• 제20권3호
• /
• pp.363-388
• /
• 2015

For controlling the vibration of specific building structure with large span, a practical method for the design of MTMD was developed according to the characteristics of structures subjected to wind loads. Based on the model of analyzing wind-induced response of large-span structure with MTMD, the optimization method of multiple tuned mass dampers for large-span roof structures subjected to wind loads was established, in which the applicable requirements for strength and fatigue life of TMD spring were considered. According to the method, the controlled modes and placements of TMDs in MTMD were determined through the quantitative analysis on modal contribution to the wind-induced dynamic response of structure. To explore the characteristics of MTMD, the parametric analysis on the effects of mass ratio, damping ratio, central tuning frequency ratio and frequency range of MTMD, was performed in the study. Then the parameters of MTMD were optimized through genetic algorithm and the optimized MTMD showed good dynamic characteristics. The robustness of the optimized MTMD was also investigated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1283-1286
• /
• 2005

Multimodal optimization is one of the most interesting topics in evolutionary computational discipline. Simple genetic algorithm, a basic and good-performance genetic algorithm, shows bad performance on multimodal problems, taking long generation time to obtain the optimum, converging on the local extrema in early generation. In this paper, we propose a new genetic algorithm with two new genetic mutational operators, i.e. global and local mutation operators, and no genetic crossover. The proposed algorithm is similar to Simple GA and the two genetic operators are as simple as the conventional mutation. They just mutate the genes from left or right end of a chromosome till the randomly selected gene is replaced. In fact, two operators are identical with each other except for the direction where they are applied. Their roles of shaking the population (global searching) and fine tuning (local searching) make the diversity of the individuals being maintained through the entire generation. The proposed algorithm is, therefore, robust and powerful.

• 한국정보통신학회논문지
• /
• 제7권6호
• /
• pp.1103-1108
• /
• 2003

본 논문에서는 2.4GHz 대역의 근거리 무선 통신에 사용되는 역-F형 내부 안테나의 설계 값에 따른 안테나 특성을 분석하였다. PCB 기판에 인쇄된 형태로 설계하여 안테나의 길이, 단락 스터브의 두께, 피드선과 단락 스터브 사이의 간격, 안테나와 접지면 사이의 간격, 안테나의 두께 및 기판의 두께와 기판의 유전율에 따른 특성 변화를 연구하였다. 설계값에 따른 특성변화 그래프로부터 설계값을 튜닝하여 최적의 안테나를 설계하였다. 설계된 안테나는 VSWR이 1.5이하인 주파수 대역폭이 6.3%, 이득 3dB 정도를 얻었다.

• 제어로봇시스템학회논문지
• /
• 제3권5호
• /
• pp.526-531
• /
• 1997

To control nonlinear chemical processes, a new neural linearizing control scheme is proposed. This is a hybrid of a radial basis function(RBF) network and a linear controller, thus the control action applied to the process is the sum of both control actions. Firstly, to train the RBF newtork a linear reference model is determined by analyzing the past operating data of the process. Then, the training of the RBF newtork is iteratively performed to minimize the difference between outputs of the process and the linear reference model. As a result, the apparent dynamics of the process added by the RBF newtork becomes similar to that of the linear reference model. After training, the original nonlinear control problem changes to a linear one, and the closed-loop control performance is improved by using the optimum tuning parameters of the linear controller for the linear dynamics. The proposed control scheme performs control and training simultaneously, and shows a good control performance for nonlinear chemical processes.

• 한국해양공학회지
• /
• 제18권5호
• /
• pp.29-35
• /
• 2004

A new approach, referred to as a successive zooming genetic algorithm (SZGA), is proposed for identifying a global solution, using continuous zooming factors for optimization problems. In order to improve the local fine-tuning of the GA, we introduced a new method whereby the search space is zoomed around the design variable with the best fitness per 100 generation, resulting in an improvement of the convergence. Furthermore, the reliability of the optimized solution is determined based on the theory of probability, and the parameter used for the successive zooming method is optimized. With parameter optimization, we can eliminate the time allocated for deciding parameters used in SZGA. To demonstrate the superiority of the proposed theory, we tested for the minimization of a multiple function, as well as simple functions. After testing, we applied the parameter optimization to a truss problem and wicket gate servomotor optimization. Then, the proposed algorithm identifies a more exact optimum value than the standard genetic algorithm.

• 전자공학회논문지SC
• /
• 제44권1호
• /
• pp.25-32
• /
• 2007

본 논문은 시간 응답을 과도응답과 정상상태 응답으로 분류하여 1차의 지연시간을 포함한 공정을 동정하는 새로운 모델링 방법을 제시했다. 먼저 공정의 입.출력 데이터를 분석하여 공정의 상태를 정상상태 응답과 과도상태 응답으로 분류한다. 그 다음 최소 자승법을 사용하여 정상상태 응답은 하나의 1차의 지연시간을 갖는 공정으로 추정하고, 과도상태 응답은 여러 개의 모델로 나누어 모델링 한다. 최적의 PID 동조법으로는 지연시간을 보상하는 Smith- Predictor 구조에 성능지수 ITAE값이 최소가 되도록 설계하였다. 시뮬레이션을 통하여 다양한 공정에 대하여 본 논문에서 제안한 방법을 적용하여, 모델축소 방법의 정확성 및 제어기 성능의 개선을 보였다.

• Structural Engineering and Mechanics
• /
• 제36권5호
• /
• pp.561-573
• /
• 2010

The potential of the liquid column vibration absorber (LCVA) as a seismic vibration control device for structures has been explored in this paper. In this work, the structure has been modeled as a linear, viscously damped single-degree-of-freedom (SDOF) system. The governing differential equations of motion for the damper liquid and for the coupled structure-LCVA system have been derived from dynamic equilibrium. The nonlinear orifice damping in the LCVA has been linearized by a stochastic equivalent linearization technique. A transfer function formulation for the structure-LCVA system has been presented. The design parameters of the LCVA have been identified and by applying the transfer function formulation the optimum combination of these parameters has been determined to obtain the most efficient control performance of the LCVA in terms of the reduction in the root-mean-square (r.m.s.) displacement response of the structure. The study has been carried out for an example structure subjected to base input characterized by a white noise power spectral density function (PSDF). The sensitivity of the performance of the LCVA to the coefficient of head loss and to the tuning ratio have also been examined and compared with that of the liquid column damper (LCD). Finally, a simulation study has been carried out with a recorded accelerogram, to demonstrate the effectiveness of the LCVA.