• Mass Spectrometry Letters
• /
• 제6권3호
• /
• pp.59-64
• /
• 2015

Quadrupole ion trap mass analyzer with a simplified geometry, namely, the cylindrical ion trap (CIT), has been shown to be well-suited using in miniature mass spectrometry and even in mass spectrometer arrays. Computation of stability regions is of particular importance in designing and assembling an ion trap. However, solving CIT equations are rather more difficult and complex than QIT equations, so, analytical and matrix methods have been widely used to calculate the stability regions. In this article we present the results of numerical simulations of the physical properties and the fractional mass resolutions m/Δm of the confined ions in the first stability region was analyzed by the fifth order Runge-Kutta method (RKM5) at the optimum radius size for both ion traps. Because of similarity the both results, having determining the optimum radius, we can make much easier to design CIT. Also, the simulated results has been performed a high precision in the resolution of trapped ions at the optimum radius size.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.374-377
• /
• 2008

Magnesium alloy sheets are usually formed at temperatures between $150^{\circ}C$and $300^{\circ}C$ because of their poor formability at room temperature. In the present study, the formability of AZ31B magnesium alloy sheets was investigated by the analytical and experimental approaches. First, tensile tests and the limit dome height test were carried out at elevated temperatures to get the mechanical properties and forming limit diagram, respectively. And then deep drawing of cross shaped die was tried to get the minimum corner radius and forming limit at specific temperature. Blank shape, punch velocity, minimum corner radius, fillet size, etc, were determined by finite element analysis physical try-outs. Especially, optimum punch and die temperature were suggested through the temperature-deformation analysis using Pam-stamp.

• Journal of Biosystems Engineering
• /
• 제22권3호
• /
• pp.343-350
• /
• 1997

In farm management, many factors should be considered to select optimum farm machinery Some factors such as fm size can be quantified, but other factors such as working experience can not be. Futhermore, as several factors are missed and assumptions are made for the selection using conventional computer programs, the result is sometimes questionable. This problem can be solved using artificial intelligent techniques such as expert system. In this study, an expert system was developed to select optimum machinery by considering available working days, machinery to on, farming environments, labor cost, population, etc. It also took into account the characteristics of machinery, turning radius, easiness of operation, subsidy, loan to purchase, asset. farmers age, Rest Metabolic Rate, and working experience, etc. Expertise and experience of human experts were utilized to develop the expert system. The developed expert system was evaluated by the human experts and others, and it was proved to be practically useful fir farmers.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.249-261
• /
• 1997

A basic study on the lifting lug design has performed through the rational and systematic process. In order to evaluate the proper design-load distribution around lug eye investigation of contact force between lifting lug and shackle pin is performed using non-linear parametric analysis idealized by gap element models. Gap element modeling and nonlinear analysis procedures are illustrated and discussed based on MSC/NASTRAN. Some analysis and design guides are suggested through the consideration of several important effects such as stress distribution pattern, circumferential contact force distribution along the lug eye face, loading share rate between lug main plate and doubler, effect of loading direction, relation between applied force and deflection and size effect of shackle pin radius. Additionally optimum design studies are performed and general trends according to the variation of design parameters are suggested.

• 한국세라믹학회지
• /
• 제24권6호
• /
• pp.593-601
• /
• 1987

A thermodynamic model to predict the stability of the water-in-oil type emulsion and the size of the droplets in stable emulsions was developed. Using this model, the effects of various factors government the droplet size in the metal salt solution-kerosene-span 80 system for the preparation of Al2O3-ZrO2 composite powders were investigated. It was shown that the given emulsion systems were thermodynamically unstable in every case but could be kinetically meta stable. When radius ofthe droplet was below nm, the increase in entropy change due to the configurational contribution of small droplets dominated the total free energy change for emulsification. The optimum conditions under which smaller deoplet was obtained were proposed and the validity of the model was proved with diameters of the droplet and composite powders experimentally determined.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.177-185
• /
• 2018

There is a need to study dust separator screens with good drainage efficiency while effectively filtering suspended solids and other contaminants entering the intake pumping station, the drainage pumping station and the mediation pumping station, the cooling water inlet of the power plant, and the like. In this paper, Numerical studies were conducted for the optimal design of the dust separator screen using the Coanda effect. The shape of the dust separator screen is important, such as the right curvature radius $R_1$ at the top of the dust separator screen and the left curvature radius $R_2$ at the top, h is the height difference and shape between the screen and the accelerating plate, and ${\theta}$ is the inclination angle of the screen. A total of 4 shape factors were set and the effects of Coanda and drainage performance of each element were compared and analyzed, the optimum length and size of each shape element were derived by classifying the shape elements into direct and indirect influences. Finally, it was possible to effectively filter foreign matter by narrowing the screen spacing, and the drainage performance was analyzed and optimized through numerical studies of dust separator screen.

• KSBB Journal
• /
• 제11권1호
• /
• pp.30-36
• /
• 1996

Cyclosporin A 고정화배양과 현탁배양의 결과를 바탕으로 각각의 배양의 경우에 따른 비성장속도의 포도당에 대한 Monod 속도식을 제안하고 그에 필요 한 매개변수들을 구하였다. 고정화 배양이 현탁배양 에 비해 높은 ${\mu}m$와 낮은 Km 값을 갖는 것으로 나 타났는데 이는 고정화 균체의 우수한 활성과 기질에 대한 높은 친화도에 기 인한 것으로 보인다. 고정상 발효의 경우, 구한 매개변수들을 담체내에서의 물질 전달 및 반응속도의 정도를 나타내는 효율인자 값을 계산하는데 이용하였다. 중요한 고정화 공정변수인 담체크기, 균체부하의 정도가 기질의 확산저항에 미 치는 영향을 고려하여 효율인자값을 계산한 결과, 적절한 담체의 크기는 반경 $100 ~ 500{\mu}m$로 나타났 다. 고정화세포배양시 담체내의 균체의 균일한 분포 및 활성도의 유지를 위해서, 적정한 담체입자크기를 결정한 후 균체부하량을 조절하여 고정화 공정을 운 영하는 것이 중요한 것요로 판명되었다.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.53-59
• /
• 1999

Recently, Tailor Welded Blank (TWB) is widely used in automotive industry since the transformation characteristic of its material can be changed. However, clearance between welding surfaces becomes the important factor which affect the quality of the laser weld, causing difficulties in preparing the sheet. The objective of this paper is to systematically evaluate the effects of previously presented fracture criterion and shearing condition on precise mechanical shearing simulation result. For this purpose, a parametric study was peformed to investigate the effect of finite element size and fracture criterion on simulation result. Also, in order to predict the optimum shearing condition, effect of shearing conditions such as clearance and punch radius on the shear plane shape was evaluated.

• 대한전자공학회논문지
• /
• 제16권4호
• /
• pp.22-26
• /
• 1979

LED나 laser diode와 optical fiber의 coupling efficiency를 높이기 위해서는 lens의 곡율반경을 작게 하는 것이 효과적이다. 본 연구에서는 heating and pulling 반경에 의한 tapered lens를 고안함으로써 최적 size의 lens 제작을 용이하게 하였으며, taper의 특성을 이용하여 고효율 coupling을 가능하게 하였다. 이론적 계산에 의하여 90%까지의 light coupling이 가능함을 보였으며, 실험결과 flat end에 대한 improvement factor는 LED에서 3dB, laser diode에서 6dB까지 증가시킬 수 있었다. epoxy를 사용하여 LED에 pigital을 부착한 결과 온도특성 및 기계적 안정성에서 실용화에 충분할 정도로 우수하였다.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.1-6
• /
• 2000

Adaptive optics(AO) removes or compensates the distortion caused by a turbulent atmosphere or medium. A wavefront sensormeasures the distortion, on which the correction of AO is based. A new idea of pupil plane wavefront sensing, which consists of a relay lens and a pyramidal-shaped prism, was previously proposed. This paper reviews the idea of pupil wavefrontsensing and presents prism, was previously proposed. The simulation shows that pupilwavefront sensing provides full wavefront sensing when the intensity peak of PSF is located within half of the Airy radius from the apex of the sensor. Adding to this, the sensor is shown to have optimum sensor output with a finite bevel size of the pyramidal prism.