• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.1
• /
• pp.73-77
• /
• 1993

This study was intended to investigate the effects of solvents, particle size of a sample, sample to solvent ratio, temperature and time on the extraction of garlic oleoresin. Among eleven solvents used for oleoresin extraction from garlic, the optimal solvent was methyl alcohol. The most appropriate particle size of garlic, extracting temperature and mixing ratio of garlic to methyl alcohol were 20mesh, $25^{\circ}C$ and 1 to 3(w/w), respectively. On the basis of yield in oleoresin extraction, optimum extracting time was about 4 hours. The yield of oleoresin under the above-mentioned conditions was 21.3%. "L" and "b" as color appearance were decreased, whereas "a"was increased slightly during 60 days storage at 5$^{\circ}C$, $25^{\circ}C$ and 4$0^{\circ}C$. Changes in the pyruvate content showed close relation to pH value. During storage pyruvate content of garlic oleoresin was decreased as increasing storage temperature.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.4
• /
• pp.195-202
• /
• 2006

To determine the relative efficiency and mesh selectivity of gill net for the Pacific saury, Cololabis saira, a series of fishing experiments was carried out in the Northwest Pacific Ocean from August 13 to October 13 in 2002, using gill nets of different mesh size(30, 33, 35, 37, 39 and 42mm) constructed from two kinds of twine material(monofilament, twisted multifilament nylon web). The relative efficiency of two material gears was expressed as the ratio obtained by dividing monofilament catch by multifilament catch in number. The master selection curve of each material gear was estimated by applying the extended Kitahara's method. The catch of experimental gears is mostly Pacific saury(98.6%), Cololabis saira. The kinds of bycatch are common squid(0.7%), Pacific mackerel(0.6%), etc. Catch comparisons in the two gears showed that monofilament nylon nets are 1.7 times more efficient. The optimum values in monofilament and multifilament gill net for Pacific saury are 8.28 and 8.23, respectively.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.635-641
• /
• 2013

This study examined the dye-properties of natural fabrics dyed with Coptis chinensis and Curcuma longa root fermented with fungi. The optimum culture conditions for the fermentation of microorganisms, the relationship between natural dye color and fermentation conditions were investigated. Two different medical herbs (ground to 80-100 mesh in size) were used as a natural dyeing source. Phellinus linteus (P. linteus), which can grow in different media, such as Agarmedium (only agar containing medium), maltose extract agar (MA) and potato dextrose extract agar (PDA) culture media, were isolated from the medium. P. linteus was confirmed to be the optimum microorganism for the fermentation of Coptis chinensis and Curcuma longa, and the MA medium was confirmed to be the best for culturing. When using the microorganism as the fermenting agent, $32^{\circ}C$ was found to be the optimum fermenting temperature for both natural colorants. Regarding the dyeing property of the fermented natural dye, silk was dyed quite darkly in an appearance by naked eye estimation and the K/S value in the color strength of silk reached a high level of 16 after the fermenting process. The washing fastness of dyed silk after treatment washing was reduced from 4 to under4 and indicates that dyed silk with fermented plant was not unsubstantial. The light fastness was 1 to 2, showing intended to maintain due to the fermentation process.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.2
• /
• pp.143-151
• /
• 2003

A series of fishing experiments was carried out in the waters off the east coast of Korea from January, 2002 to March, 2003, using gill nets of different mesh sizes (m = 180, 210, 240, 270, and 300 ㎜) to determine the size selectivity of gill net for male snow crab Chionoecetes opilio. The maximum carapace length (RL) of each male snow crab caught in the fishing experiment was measured. The master curve of mesh selectivity was estimated by applying the extended Kitahara's method. Two kinds of functional models, quadratic function and cubic function were used to express logarithmic selectivity curve and were fitted to the data using the method of least squares. The obtained results were summarized as follows; 1. The cubic function of asymmetry was chosen to determine the selectivity curve of gill net for male snow crab from the model deviance comparison. 2. The result of size selectivity showed that the catch number of small male crab was getting decreased according to the increase of mesh size. 3. The optimum value (RL/m) was 0.549 and the RL/m was estimated to be 0.281, 0.296, and 0.356 when the retention probability were 0.2, 0.25 and 0.5, respectively.

• Food Science and Preservation
• /
• v.7 no.3
• /
• pp.267-272
• /
• 2000

Microwave-assisted extraction (MAE, 2,450 MHz), which is known as a rapid and more environmental-friendly process than current extraction methods, was applied to oleoresin extractions from dried pepper. As fundamental parameters of MAE, optimum conditions were found, such as 60 mesh in particle size of the sampes, 1:10(g/mL) powders was high at lower concentrations of ethanol, whereas capsanthin content remarkably increased at more than 75% of ethanol concentration. The results showed that MAE of oleoresin and capsanthin from red pepper powders was successful in 3 to 5 min of the extraction time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.603-608
• /
• 1991

To improve the utilization of red pepper, the extracting conditions of oleoresin, such as kind of solvents, particle sizes of a sample, sample to solvent ratios, extraction temperatures and times, were studied. Among eight solvents used for oleoresin extraction from red pepper, the optimal solvent was acetone. The most appropriate particle size of red pepper powder, extracting temperature and mixing ratio of red pepper to acetone were 100 mesh, $25^{\circ}C$ and 1 to 3(w/w), respectively. The basis of yield in oleoresin extraction, optimum extracting time was about 5 hours. The yield of oleoresin under the above-mentioned conditions was 18.7%.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.51-57
• /
• 1992

The hydrochloric acid leaching has been studied as a fundamental experiment on the recovery of arsenic from arsenic-bearing copper slime in copper electrorefining. The slime is mainly composed of $\beta-Cu_3As$ Which is intermetallic compound of CU and As. And the minor components are $CU_2O$ and CusAs in the slime. The optimum conditions of leaching of the slime were found to be as follows : 6N hydrochloric acid, particle size passed through 140 mesh, leaching for 150 min at $60^{\circ}C$, ratio of HCI/slime of 3 to 1 ; where 98 percent of arsenic were leached out of the As-bearing slime.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.323-327
• /
• 2000

Microwave-assisted process (2,450MHz), which is known as a more environmental-friendly process with economic advantages than the current extraction methods, was investigated to pre-establish the extraction conditions for soluble ginseng components used for the processing of ginseng products. The extractions of soluble ginseng components showed optimum conditions, such as 60 mesh in particle size, 1 : 10 (g/mL) in the sample to solvent ratio, and less than 100 watts in energy efficiency. Under these conditions using along with 60% ethanol for 5 min, the overall yield of ginseng extracts was about 83%. Most soluble components including saponins were extracted by repeating five times of microwave-assisted extraction.

• Composites Research
• /
• v.23 no.6
• /
• pp.19-25
• /
• 2010

This paper describes the optimum design of bolt locations for metal joint parts of railway bogie frame made of glass fiber/epoxy 4-harness satin woven laminate composite and PVC foam core. The optimum design analysis was done by sub-problem approximation method using Ansys Parameter Design Language(APDL). The sub-modeling method was introduced to conduct the detailed recalculation for the only target parts and reduce calculating time. The structural analysis for composite bogie frame was performed according to JIS E 4207. The results showed that the optimum design analysis using sub-modeling method was able to obtain faster and more precise results than that of the entire model by the control of mesh size for the target parts, and the maximum Von-Mises stress has been reduced in comparison with its original dimensions due to the optimum design of bolt locations.

• Analytical Science and Technology
• /
• v.12 no.5
• /
• pp.370-374
• /
• 1999

Extraction chromatography was used to scarch optimum separation conditions of terbium. Stationary phase was 2-ethylhexyl-2-ethylhexyl phosphonic acid(HEH[EHP])levextrel (-100~+150 mesh), column size was ${\Phi}20{\times}530mm$ and kept constantly temperature at $50^{\circ}C$, adsorption flow rate of $0.2mL/cm^2{\cdot}min$, elution flow rate of $1.0mL/cm^2{\cdot}min$, column diameter to packing height of 1:15. But to search optimum separation conditions of terbium, it changed the eluent acidity, the loading weight of sample. the composition of sample. In conclusion, acidity was 0.6 N HCl, loading weight of sample was about 5% and composition of sample was $Gd_2O_3(20%)+Tb_4O_7(60%)+Dy_2O_3(20%)$. Moreover purity of separated terbium by ICP-AES analysis was 99.98% in yield of 99.99%.