• Development and Reproduction
• /
• v.6 no.1
• /
• pp.17-23
• /
• 2002

In oocyte retrieval, a vein anesthetic drug is commonly used for induction and maintenance of general anesthesia. Propofol and Thiopental sodium are frequently used for ultrasound-guided transvaginal oocyte retrieval. The present study aimed to assess the effects of Propofol and Thiopental on in vitro fertilization(IVF). Immature porcine oocytes were exposed to various concentrations ot Propofo1 and Thiopental sodium. The rates of oocyte maturation, fertilization and development were observed. The parthenogenetic effects of the anesthetics were also evaluated. The rate of oocyte maturation after exposure to high concentrations of the anesthetics for long time was significantly higher than that of the control. But the rate of fertilization after long-time exposure to the high concentration of the anesthetic drugs was significantly lower than that of the control. The results support that Propofo1 serves like other anesthetics described, as a parthenogenetic activator. Oocytes exposed to Thiopental sodium showed decreased rates of maturation and fertilization. These results suggest that usage of optimum concentration of anesthetic drug is important in increasing the rates of oocyte maturation, fertilization and development in IVF.

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.3-16
• /
• 2017

With the development and proliferation of three-dimensional(3D) printers, consumers in modern society can now print products of what they want three-dimensionally at home. However, consumers themselves would have to produce digital design maps that are compatible with 3D printers and to set up the optimum printing quality and temperature, as well as to pay for maintenance and repair of 3D printers and to respond to any possible lawsuits related to intellectual property right about designs in order to make possible consumer-tailored manufacturing through 3D printing. However, in reality, since it is very difficult for consumers to respond to these issues, it is necessary to develop services that perform 3D printing on behalf of consumers in the desired direction. Motivated by this objective, this study investigated user experiences on Shapeways(www.shapeways.com), which is a global online 3D printing product and sales companies, from many viewpoints in order to obtain insight into 3D printing services and modes which were preferred by consumers. The study result showed that quantitative evaluations on usability, search process, price adequacy, re-visit intention, diversity of design, and satisfaction of design was scored low overall. Furthermore, this study acquired insight about consumer-tailored 3D printing services through constructive suggestions on multi-language support, openness of manufacturing process, simultaneous operation of online and offline sites, design-oriented consumer-tailored manufacturing service, services that ensure delivery safety and product durability, and surface finishing services. This study is expected to provide a wide range of opinions not only on 3D printing service platform development but also on related industry and research.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.3
• /
• pp.217-222
• /
• 2010

Two 15-week feeding trials were conducted to investigate how the rate and frequency of feeding affected the winter growth of olive flounder ($13^{\circ}C$). In the first experiment, triplicate groups of fish (initial mean weight $117{\pm}6.0$ g) were fed extruded pellets twice a day at feeding rates of 0.1, 0.25, 0.4, 0.55, and 0.57% (satiation) body weight per day (BW/d). The weight gain, specific growth rate, and feed efficiency increased significantly (P<0.05) with the feeding rates from 0.1 to 0.55% BW/d, but no significant differences in these parameters were found for fish fed diets of 0.55% BW/d and satiation. The moisture and ash contents of whole body of fish tended to decrease as the feeding rate increased, but the opposite trend was found for crude lipid content. In the second experiment, triplicate groups of fish (initial mean weight $117{\pm}6.3$ g) were fed extruded pellets to apparent satiation at the three different feeding frequencies: one meal 2 days, one meal a day and two meals a day. The weight gain and specific growth rate of fish fed one meal 2 days were significantly (P<0.05) lower than those of fish fed one or two meals a day, whereas no significant differences in the weight gain and specific growth rate were found between fish fed one and those fed two meals a day. Feed efficiency and condition factor were not significantly affected by feeding frequency. Based on these results, a feeding rate of 0.3% BW/d is recommended as maintenance feeding level, and the optimum feeding frequency is one meal a day with satiation feeding for the growth of olive flounder (117-147 g) during winter ($13^{\circ}C$).

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.729-742
• /
• 2012

Recently, to using chemical coagulation process for T-P removal in STP effluent as tertiary treatment process is generalized in the country. The importance of analysis technique to save the treatment & maintenance cost during coagulation process is becoming more increased each day. Thus, it is necessary for the analysis technique during coagulation process to be presented well the characteristic of coagulation in field apply. There are a few analysis techniques such as Jar Test, zeta potential analysis and streaming current detecting techniques. But there are difficult to apply in field immediately due to long test time and difficult analysis techniques. And using PDA technique, it is reviewed applicability of the techniques as field index on pilot plant of P-CAP system The P-CAP system is composed of an in-line static mixer, a Flocculation Tank and the CAP reactor with 2 stage weir for effluent. Pre-test is performed to fix the mixing velocity in the Flocculation Tank using the PDA equipment and it fixed with 30RPM. Also, Jar Test is performed to select optimum dose of each coagulant for each T-P concentration level of influent. Result of continuous test on pilot plant of P-CAP system, the FSI in the Flocculation Tank is increased consistently by increasing each dosing concentration of coagulant such as LAS and PAC in the low level influent T-P concentration comparatively. It is considered that formed Al-hydroxide complexes for dosed coagulant are caused FSI variation. Furthermore, it seems that FSI value in the high level influent T-P concentration appeared lower than the opposite influent condition relatively because it is formed simultaneously Al-hydroxide complexes as solid type and Al-phosphorus complexes as soluble type. Thus, relation of FSI by PDA technique and T-P removal of final effluent on pilot plant of P-CAP system are very limited for the kind of coagulant and the characteristics of influent. And it though that FSI value by PDA technique with analyzing of turbidity in Flocculation Tank will be used restrictedly on field as the relative field-index.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.2
• /
• pp.145-150
• /
• 2020

Water wall tube is one of the major factors consisting of a fluidized bed boiler and it plays very important role for the generation of electricity within the boiler. But these water wall tubes within the fluidized bed boiler are subject to the ware and corrosion caused by the high temperature gas and the flowing medium. If water leak is occurred, the secondary damage by the water leak will occur. As a result of that, the power generation efficiency decreases noticeably. Therefore, the maintenance of the water wall tube is very important. In this study, we designed a exciter sensor based on simulation and composed a remote field eddy current system for the defect evaluation of the outer water wall tube. Starting from the shape design of exciter, we conducted simulations for various design factors such as the water wall tube size, material, frequency, lift-off and so on. Based on the results, we designed the optimum exciter sensor for the water wall tube test within the fluidized bed boiler.

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.71-76
• /
• 2004

In order to investigate the Post-operative changes in scoliotic spine according to selection of fusion level a mathematical finite element model of King-Moe type II scoliotics spine system was developed. By utilizing this finite element scoliosis model surgical correction simulation procedures of pedicle fixation and derotation were simulated. In consequence of the calculation by changing the fusion Levels, postoperative changes like Cobb angle, apical vertebrae axial rotation (AVAR), thoracic kyphosis, and rib hump were Qualitatively analyzed. In the analysis of operative kinematics, the decrease or Cobb angle was most prominent in distraction than in deroation. Applying the rod derotation only was not effective in decrease of Cobb angle but just caused increase of At AR and rib hump. From the operative simulation, co-action or distraction and translation during rod insertion has major impact on Cobb angle decrease and maintenance of kyphosis. With rod rotation, Cobb angle decrease was obtained, but combined increase of AVAR and rib hump was simulation observed as well. The case of most extended instrumentation range with 60o rod rotation produced double decrease of Cobb angle, but the increase of rib hump and AYAR occurred corresponding1y. The optimum selection of fusion level was proved as one level less than inflection position of the thoracic spine curvature.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.3
• /
• pp.171-185
• /
• 2000

The treatment objectives of the complete oral rehabilitation are : (1) comfortably functioning temporomandibular joints and stomatognathic musculature, (2) adherence to the basic principle of occlusion advocated by Schuyler, (3) anterior guidance that is in harmony with the envelope of function, (4) restorations that will not violate the patient's neutral zone. There may be many roads to achieving these objectives, but they all convey varing degrees of stress and strain on the dentist and patient. There are no "easy" cases of oral rehabilitation. Time must be taken to think, time must be taken to plan, and time must be taken to perform, since time is the critical element in both success and failure. Moreover, a systematized and integrated approach will lead to a prognosis that is favorable and predictable. This approach facilitates development of optimum oral function, comfort, and esthetics, resulting in a satisfied patient. Such a systematized approach consists of four logical phase : (1) patient evaluation, (2) comprehensive analysis and treatment planning, (3) integrated and systematic reconstruction, and (4) postoperative maintenance. Firstly, we must evaluate the mandibular position. The results of a repetitive, unstrained, nondeflective, nonmanipulated mandibular closure into complete maxillomandibular intercuspation is not so much a "centric" occlusion as it is a stable occlusion. Accordingly, we ought to concern ourselves less with mandibular centricity and more with mandibular stability, which actually is the relationship we are trying to establish. The key to this stability is intercuspal precision. Once neuromuscular passivity has been achieved during an appropriate period of occlusal adjustment and provisionalization, subsequent intercuspal precision becomes the controlling factors in maintaining a stable mandibular position. Secondly, we must evaluate the planned vertical dimension of occlusion in relationship to what may now be an altered(generally diminished), and avoid the hazard of using such an abnormal position to indicate ultimate occlusal contacting points. There are no hard and fast rules to follow, no formulas, and no precise ratios between the vertical dimension of occlusion. Like centric relation, it is an area, not a point.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.47-67
• /
• 2014

This study examined elements which could evaluate a container terminal logistics system from the viewpoint of supply chain management. This study derived the elements of a container terminal logistics system such as flexibility, reliability, responsiveness, and information sharing and 16 evaluation sub-items in the aspect of a supply chain. In the result of analysis, the weight between SCM elements of a container terminal logistics system was the highest in reliability(0.282), followed by flexibility(0.273), responsiveness(0.224), and information sharing(0.221). The conversion weight was calculated by combining the weight of elements of a container terminal logistics system and the weight of evaluation sub-items. The highest weight which was considered as the most important factor to evaluate a container terminal logistics system was work planning(berth, yard) of flexibility(0.081), followed by accurate fulfillment of container work schedule(ship, yard) and the optimum distribution and arrangement of equipment(QC, TC, YT)(0.079), stable works without damage of containers and ships(0.071), and preventive maintenance of equipment and operators' skill(0.070).

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.35-42
• /
• 2010

Most of the dredged sand generated from the sewage pipe maintenance project and the government's four-river project are disposed depending on abandonment and filling-up. This is caused by the lack of related recycling technology using dredged sand appropriately and high absorption rate and micro-particles of dredged sand producted from existing sand production system. Thus, this study carried out a quality assessment for the dredged sand produced through the optimum washing and sorting system supplementing problems of existing dredged sand production system as a part of research to examine performance of removing micro-particles and foreign substances. As a result of the assessment, the dredged sand produced through the cleaning and sorting system showed a wide quality improvement effect in absorption rate, 0.08 mm sieve pass amount, clay lump volume and organic impurity content, and it turned out to satisfy both the quality standards of this study, KS F 2573(recycled aggregate for concrete) and KS F 2526(aggregate for concrete) so it could be confirmed that it would be able to be used as an aggregate for concrete in the future.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.110-118
• /
• 2003

Spacer dampers maintain the constant gaps between each conductor in a bundle conductor-transmission line, and are installed at proper intervals to keep a line from all sorts of damages derived from the vibration energy caused by mechanical or electrical external factors. It is most important to embody a technology which considers difficulties of maintenance and repair, and has optimum elements in order to prevent accidents such as destruction by fire or the snapping of a wire by the effect of vibration phenomenon coming from transmission lint In the resent thesis, therefore, the analysis of vibratory characteristics of spacer damper is set up by analytical methods such as the analysis of conductor motion's governing equation, the equation of spacer damper's motion, spacer damper-fastened wire's motion in a span and the numerical analysis of finite difference method. Furthermore, the installation distance between spacer dampers was scrutinized by simulations of various vibration phenomena which change at any time as actual conditions do, and hereafter difference method. Furthermore, the installation distance between spacer dampers was scrutinized by simulations of various vibration phenomena which change at any time as actual conditions do, and hereafter we will be able to analyze all kinds of vibration phenomena coming from a boltless spacer damper with 6 bundle conductor for 765kV transmission line based on new analytical methods.