• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.17-18
• /
• 2003

Although flounder is one of the most important marine fish for aquaculture in Korea, feeding the flounder in commercial farms depends mainly on moist pellet in which over 70% frozen fishes (e.g. frozen horse mackerel) are incorporated in its formulation. Therefore, for further expansion of flounder farming, it is essential to employ practical formulated feeds that can support reasonable growth. Development of nutritionally balanced and cost-effective feeds is dependant on the information about nutritional requirement and feed utilization of the species. Nutrient and energy source in feed are needed for the growth and maintenance of fish. Protein is probably the most important nutrient affecting fish growth and feed cost. Therefore, it is essential to determine the optimum dietary protein level for the growth of fish, both its high proportion in the feed and because it is the main factor in determining feed cost. Dietary energy level is also critical because protein source in the feed is utilized as an energy source when the feed deficient in energy is fed to fish, whereas when the feed excess in energy is fed to fish, feed consumption decreased and resulted in growth reduction due to lack of other necessary nutrients for normal growth. Improper dietary protein, energy levels and/or their ratio will lead to an increase of fish production cost and deterioration of water quality resulting from wasted feed; thus, they are important in formulating commercial feed. Dietary lipids play important roles in providing energy and essential fatty acid for normal growth and survival of fish. Although carbohydrates are not essential nutrients for carnivorous fish, these compounds play important roles as a low-cost energy source for protein sparing and also as a feed binder. Nutrition researches for flounder have identified its requirements of protein, lipid and essential fatty acid, vitamin, and minerals for normal growth. Other studies have also been carried out to investigate the utilization of the protein, lipid and carbohydrate sources. Based on these nutritional information obtained, practical feed formulations have been studied for improve aquaculture production of flounder. The results of the researches on utilization of dietary protein, lipid and carbohydrate by flounder are discussed in this review.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.6
• /
• pp.112-118
• /
• 2012

Fine suspended solids from mine drainage draw attentions due to their potential adverse influences on the water quality, such as increasing turbidity and degrading aesthetic landscape. Currently, sand filter beds are adapted in some mine drainage treating systems. However, more efficient system is in demand, as the existing sand beds reveal some problems, such as frequent maintenance intervals. Various filtering mediums including fly ash, mine tailing aggregates and the sand were tested for improving the current system, using column experimental set-up. Mine drainage samples were collected from the current treating systems in the abandoned H coal mine. The experiment was run for 7 days. Suspended solids recorded as 100.9 mg/L and the value exceeds the current standard, 30 mg/L. Sand was proved to still be the optimum medium for the fine suspended solids, compared to fly ash and fly ash + sand. Mine tailing aggregates were placed at the exit of the columns, substituting gravels. The tailing aggregates is made by mine tailings and clay. Sand bed filters can also be improved by mixing granular activated carbon, which was found to be economical and efficient in the batch experiment, conducted at the same time.

• Structural Monitoring and Maintenance
• /
• v.5 no.3
• /
• pp.391-416
• /
• 2018

The purpose of this article is to strengthen concrete structures using buckling and non-buckling braces. Connection plates are modeled in three shapes including the effect of 1.5t hinge zone length, 2t one and without the zone (1.5t-CP, 2t-CP and WCP). According to the verification performed with ABAQUS software, the connection plates which are superior in ductility and strengthening are found. The results show adding steel braces in concrete moment frames increase the strength and stiffness of the structures up to about 12 and 3 times, respectively. The frame strength increased about 21 and 25 percent with considering the effect of 2t hinge length in connection plates compared to 1.5t-CPs and WCPs. Also the ductility of retrofitted frames with 2t-CP improved 2.06 times more than WCP ones. Thus, 2t-CP sample is the best choice for connecting steel braces to concrete moment frames for retrofitting them. Afterwards, optimum conditions for elemental coating in braces with no buckling are assessed. The length of concrete coatings could be reduced about 30 percent, and buckling did not occur. Therefore, the weight of restraining coating decreased, and its performance improved. It is worth noting that BRBs could be constructed with only steel materials, which have outer steel tubes too. In fact, only the square cross sections of the tube profiles are appropriate for removing the filler concrete, and the rectangular ones are prone to buckle around their weak axis.

• The Korean Journal of Ecology
• /
• v.16 no.4
• /
• pp.417-428
• /
• 1993

Branching growth pattern of Mugnolza denuduta is likely to be originated from two growth strategies: environment overcoming strategy and life maintenance strategy, which coexist in a tree. Growth rate of branches was strongly correlated with relative light intensity (P<0.001) and physical contact (P<0.01), however there is no significant correlation between growth rate and direction of branch. When relative light intensity is less than 1%, the growth was restricted by physical contact with the surrounding branches. In contrast, the growth was rarely restricted by physical contact when relative light intensitiy was 10% or more. The branching rate was significantly affected by the presence or absence of physical contact (P<0.05), but it was not significantly affected by relative light intensity nor by the direction of branch. In the beginning stage of the growth, the ratio of the material allocation from main branch to subbranch was large and varied with the influence of surrounding environment. These various growth rates, which implicate a variety of material allocation ratios (0.16~0.98), affect branch growth pattern through the optimum growth strategies. The growth and arrangement of branches of Magnolia denudata display the solar collectors to maximize the total amount of energy absorbed and to overcome the restriction of the environment.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.1
• /
• pp.35-42
• /
• 2015

Although the interest for earth architecture has been expanded and settled as a part of modern architecture, precisely calculating the ratio of water content in practice is still difficult and the calculation is based on empirical analysis yet. This causes many problems in durability and maintenance of earthen architecture. Therefore, this study investigated to find the easiest way to correctly calculate the appropriate level of water content ratio (AWCR), which can be used in practice. Until now, the workers have checked the AWCR based on their own experience with popular but vague manuals. On this awareness, we studied the several testing methods and found the dropping test which uses the pattern of shape after the sample is dropped. In this point, we studied and developed the definite testing method in terms of process, and shape discrimination. Also we suggest the test recording sheet by using the cobalt chloride($CoCl_2$) whose color is instantly changed when contacts with the moisture. It is believed that this result can help improving the quality and durability of the earthen architecture using the rammed earth method and the efficiency in practice.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1245-1256
• /
• 2014

The physical nature of fatigue shows the considerable amount of scatter from intrinsic and extrinsic factors. In this study, some degradation models, such as the gamma process model, were reviewed in terms of uncertainties associated with the continuous, gradual, and monotonic nature of fatigue crack growth. Statistically varying fatigue crack growth data obtained from Lu and Meeker were used as an example to demonstrate the use of the gamma process model. This model can describe the condition and lifetime as statistical distribution curves whose shapes vary with cycles. From the skewness of the statistical distribution curves, it was confirmed that the median is suitable for being considered as the expected life. The use of the gamma process model enables the optimum replacement period and percentile life to be employed as criteria for preventive maintenance policy.

• Microbiology and Biotechnology Letters
• /
• v.28 no.6
• /
• pp.355-360
• /
• 2000

A UVmutant of Candida rugosa IF00750 was made and used to convert butYlic acid to D-$\beta$-hydroxybutyric acid(D-$\beta$-HBA). Major regulating factors for D-$\beta$-HBA fennentation were investigated via chemostat analyses. The maximum specific productivity was achieved at a specific growth rate of $0.06h^{-1}$ where the glucose and butyric acid concentrations in the fermentor were 10 g/L and 8.7 g/L. respectively. A fed-batch fennentation was performed with maintenance of the optimum glucose and butyric acid concentrations. The D-$\beta$-HBA concentration after 120 h of cultivation reached 12.4 g/L, which was 4.7 times greater illan the concentration obtained by batch fermentation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.5
• /
• pp.160-170
• /
• 2003

A pilot study was performed to examine the feasibility of intermittent slow sand filtration for agricultural reuse of reclaimed water. The effluent of biofilter for 16-unit apartment was used as influent to the slow sand filtration system at 0.6 $m^3$/day loading rate using 15 seconds spray in every 10 minutes on the about 1 $m^2$ surface area and 0.5 m depth. The influent concentrations of total coliform (TC), fecal coliform (FC) and E. coli were in the range of 10.000 MPN/100 mL. and they were reduced to less than 1,000 MPN/100 mL after filtration with average of 320, 270, and 154 MPN/100 mL, respectively, showing over 95 % removal. Turbidity and SS were improved effectively and their average concentration was reduced to 0.8 NTU and 1.7 mg/L, respectively, and removal rate was about 50 %. Average BOD and COD concentrations were also reduced substantially to 2.6 and 25.8 mg/L with about 55 and 21 % removal rate, respectively. Nutrients removal was relatively low and removal rate for T-N and T-P was low however, remaining nutrients might be beneficial and less concerned in case of agricultural reuse. The concentration of biofilter effluent used in this experiment was in the range of secondary treatment effluent but slightly stronger than the one from existing wastewater treatment plants (WWTPs). Therefore, intermittent slow sand filtration might be also applicable to the effluent from WWTPs as long as its agricultural reuse is available. Considering stable performance and effective removal of bacterial indicators as well as other water quality parameters, low maintenance, and cost-effectiveness, the intermittent slow sand filtration was thought to be an effective and feasible alternative for agricultural reuse of reclaimed water. This paper is a preliminary result from pilot study and further investigations are recommended on the optimum design parameters before full scale application.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.133-141
• /
• 2014

Due to limited supplies and expensive importing costs, it is a goal to replace overseas peat with local soil amendments in turf industry of Korea. The study was initiated to compare the performances of five domestic and imported organic soil amendments (OSAs) on establishment characteristics and to provide basic information for root zone composition on sports turf design and construction. The study was conducted in Kentucky bluegrass (Poa pratensis L., KB) under greenhouse conditions from March to June in 2008. A total of 25 treatments of OSA + sand were prepared. These amendments were Berger Peat (OMA), Eco-Peat (OMB), G1-Soil (OMC), Premier Peat (OMD), and Supersoil I (OME). Significant differences were observed in establishment vigor, seedling emergence, and top growth. Results varied depending upon the type of OSAs and their rates in rootzone mixtures. OMA reached over 70% in establishment vigor in 5 WAS (weeks after seeding). OMC produced a maximum vigor of approximately 60% in 6 WAS. The OME amendment, however, showed poor performance lower than 30% in establishing KB turf until 8 WAS. There were considerable variations of top growth, being 3.8 to 14.5 cm. Greater differences in top growth resulted from OME mixtures. Shoot growth orientation in KB is also influenced by OSAs. In general, optimum mixing rate was considered as 10 to 20% for establishment vigor and 20 to 40% for top growth. Considering overall responses to establishment vigor, seedling emergence, and shoot growth, both local OMC and overseas OMD are considered as the useful soil amendments applicable for sports turfs. Domestic OME amendment would be applied for a low maintenance turfs such as rough and utility areas due to greater shoot growth. Information on these amendments would be of practical use for sports turf design and construction. Repeated experiments and field performance test are required to evaluate these OSA effect on other major turfgrass species and also to determine local OSA as imported peat substitute.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.4
• /
• pp.86-95
• /
• 2002

Anaerobic digestion of municipal solid waste(MSW) is recently getting attention due to energy generation and abatement of global warming. MSW has high solid content and low nitrogen content. Its major component is cellulose and hemicellulose. The conversion rate of organic portion of MSW to methane is approximately 50%, representing $0.2m^3/kg$ VS. Long hydraulic retention time is required for high solid content and inoculum should be mixed with the feed. When MSW is digested anaerobically, maximum limit of C/N ratio is 25 and the optimum concentration of $NH_3-N$ is 700mg/L. lime and sodium bicarbonate are used to adjust pH. Excess addition of sodium bicarbonate above 3,500mg/L will cause sodium toxicity. Thermophilic anaerobic digestion is effective in the control of pathogen although its operation and maintenance is difficult. To optimize the anaerobic digestion of MSW, it is necessary to understand the mechanism of microorganims involved in anaerobic digestion.