• Journal of the Korean Institute of Gas
• /
• v.3 no.1
• /
• pp.33-40
• /
• 1999

The extraction characteristics of lipids from powdered sea mustard have been investigated by the use of supercritical carbon dioxide($SC-CO_2$) and cosolvents. The extraction rate was increased as the particle size of the sea mustard is smaller, the pressure is higher, the temperature is lower, and the quantities of the fluid is more. However, the extraction yield of lipids from sea mustard was almost constant at a given condition. The optimum extraction condition was determined with the extraction yield of $1.45wt\%$ at 300um of particle size, 313K of $SC-CO_2$ temperature, 13.8MPa of pressure, and 30L/min of flow rate. Ethanol was the most efficient cosolvent among ethanol, methanol, and hexane. The extraction yield was increased at about 2.21times by the addition of ethanol as a cosolvent to $SC-CO_2$. As the residence time and the average concentration of lipids were decreased, the mass transfer parameter($k_fa$) was increased. But the opposite result was obtained when the ethanol was used as cosolvent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.8
• /
• pp.1206-1212
• /
• 2010

This study was performed to establish optimum extraction condition of Tricholoma matsutake. A central composite design was applied to investigate the effects of independent variables, extraction temperature ($X_1$), extraction time ($X_2$) and water per sample ($X_3$) on dependent variables such as soluble solids contents ($Y_1$), total phenolics contents ($Y_2$), reducing sugar contents ($Y_3$), electron donating ability ($Y_4$) and nitrite scavenging ability ($Y_5$). The optimum extraction conditions were predicted and monitored by response surface methodology using SAS program based regression analysis. Soluble solids content, electron donating ability and nitrite scavenging ability were highly affected by water per sample. However, the contents of total phenolics and reducing sugar were affected by water per sample and extraction temperature as well. The optimum extraction conditions for soluble solids were 34.84 mL/g (water/sample) at $78.85^{\circ}C$, for 3.33 hr. In contrast, the optimum extraction conditions of electron donating ability were temperature of $91.00^{\circ}C$, time of 1.62 hr and water per sample of 39.42 mL/g. Taken together, the optimum ranges for hot water extraction of Tricholoma matsutake were $70{\sim}90^{\circ}C$, 2~4 hr and 30~50 mL/g.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.859-865
• /
• 2016

Thise study aimed to determine the optimum antioxidant extraction conditions of dried Gugija (Lycium chinensis Mill). To determine the operational parameters, including ethanol concentration ($X_1$, 0~80%) and extraction time ($X_2$, 1~5 hr), a response surface methodology was applied to monitor brown color intensity, total phenolic compounds, ABTS radical scavenging activity, and $Fe^{2+}$ chelating activity. Coefficients of determinations ($R^2$) of the models were 0.8486~0.9214 (p<0.05~0.1) in dependent parameters. Brown color intensity of Gugija extracts reached a maximum of 0.75 (OD in 420 nm) under extraction conditions of 2.88 hr in 78.10% ethanol. Total phenolic compounds reached a maximum of $2,355{\mu}g$ under extraction conditions of 4.94 hr in 30.17% ethanol. ABTS radical scavenging activity was 13.83% at 4.61 hr and 16.21% ethanol. $Fe^{2+}$ chelating activity showed a maximum of 58.54% under extraction conditions of 3.39 hr in 0.76% ethanol. Optimum extraction conditions (5 hr extraction in 15% ethanol) were obtained by superimposing the contour maps with regards to total phenolic compounds, ABTS radical scavenging activity, and $Fe^{2+}$ chelating activity of dried Gugija. Maximum values of total phenolic compounds, ABTS radical scavenging activity, and $Fe^{2+}$ chelating activity under optimum extraction condition were $2,397{\mu}g$, 15.62% and 54.78%, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.65-71
• /
• 1999

This study was carried out to investigate the effect of xylanase pretreatment of the unbleached hardwood kraft pulp during the conventional Chlorine-Extraction- Hypochlorite (CEH) bleaching on pulp property. Optimum bleaching condition was evaluated by using Novozym produced from the fungus Humicola insolens. Also the effect of chelating agent prior to enzyme treatment was analyzed. The kappa number of enzymatic bleached pulp at the enzyme charge 10 IU/ml was slightly similar to that of bleached pulp without enzyme. By enzyme treatment, the chlorine charge in conventional CEH bleaching process of hardwood KP could be reduced by 17%, while no adverse effect on pulp yield and strength was. The optimum condition for enzyme pretreatment was 10 IU/ml xylanase charge, 3 to 4 hrs treatment, and 2% pulp consistency. In sugar composition in the enzyme pretreated pulp, arabinose and mannose were not much different, but more xylose was retained. This high content of hemicellulose in pulp seems to play an important role in pulp properties. The pulp pretreatment by chelating agent prior to enzyme treatment could improve the enzyme activity and enhance the bleaching effect at 0.2% diethylenetriamine pentaacetic acid (DTPA) charges.

• Journal of Ginseng Research
• /
• v.26 no.4
• /
• pp.202-205
• /
• 2002

This study was carried out to investigate the optimum conditions for extraction of acidic polysaccharide from red ginseng marc produced by manufacturing alcoholic and water extract from red ginseng. Extraction efficacy of acidic polysaccharide from dried red ginseng marc was higher than that before drying. The appropriate conditions for the extraction of acidic polysaccharide from red ginseng marc were particle size under 3.35 mm after drying red ginseng marc, 1∼2 hours of extraction time and 2∼3 extraction times, respectively. The amount of acidic polysaccharide in water extract from red ginseng marc treated with $\alpha$-amylase and cellulase increased about 20∼50%. From the above resuts, we suggest that red ginseng marc produced by manufacturing alcoholic and water extract of red ginseng has higher potencies in the utilization of waste materials.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.111-116
• /
• 2016

To determine the optimum condition for the extraction of active components, noni adventitious roots were extracted under various conditions employing various solvents including methanolic water at different ratio (20, 40, 60, 80, and 100% water), extraction times and extraction methods. Anthraquinones, phenolic compounds, and flavonoids extraction using different solvents showed that 1 h of ultrasonic extraction was effective in 60-80% methanol, and 2 h of reflux extraction was effective in 80% methanol. To compare the extraction efficiency of active components according to different extraction methods and extraction times for noni adventitious roots, the active components were extracted by ultrasonic extraction, shaking extraction, reflux extraction, homogenizer extraction, high-pressure extraction, and soaking extraction. The highest phenolic contents were found in the extracted from ultrasonic extraction and anthraquinones and flavonoids contents were highest in the reflux extraction.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.445-449
• /
• 2015

This study was directed to finding an optimum extraction condition of genistein from the S. flavescens with supercritical carbon dioxide as a solvent. In this effort, effects of the extraction conditions including pressure, temperature and a co-solvent on the extraction efficiency were investigated. The aqueous ethanol and methanol solutions were used as co-solvents while the tested operating pressure and temperature ranges were from 200 bar to 300 bar and from 308.15 K to 323.15 K, respectively. The concentration of genistein was determined by means of HPLC equipped with a UV detector. From the results, it was observed that an increase in pressure led to the higher extraction efficiency. Further, methanol showed better performance as a co-slovent than ethanol. The DPPH radical scavenging activities were measured to compare antioxidant activities of S. flavescens extracts.

• KSBB Journal
• /
• v.27 no.1
• /
• pp.33-39
• /
• 2012

In this study three major curcuminoids in turmeric curcumin (1), demethoxycurcumin (2) and bismethoxycurcumin (3) were efficiently extracted by optimizing extraction condition and simultaneously identified using a fast and reliable RP-HPLC-UV-MS and TLC method. The analysis by the $C_{18}$ column was performed and the UV wavelength was fixed at 425 nm. In this result, the total extraction yield of turmeric (Curcuma longa) was increased with extraction time from 1 to 7 h. So, optimum extraction time is 4 h. Also, the highest yield of extraction amount 0.433g 8.66% was obtained by ultrasonic waves with quarter frequency kHz and an extraction time of 7 h. The experiment method was consistent with theoretical Value $r^2$ = 0.987 (1), 0.997 (2) and 0.998 (3). Moreover, LC-MS analysis provided efficiently molecular weight information of three major curcuminoids in turmeric extracts and high purity (~95%) of the curcuminoids were obtained. This work offers would be useful for chemical and biological studies of natural plants and its products.

• Journal of the Korean Professional Engineers Association
• /
• v.32 no.2
• /
• pp.99-109
• /
• 1999

The dried sea tangle added for soup prepatation to improved the taste in Korean and Japaness for long time. Attempts were made to develop the best procedures for extraction and removal of alginate by ultrafiltration and diafiltration. The summerized results of this study are as follows: 1) For hot water extraction in temperature range of 60～100$^{\circ}C$ for 4 hours, the higher temperature resulted higher yields in solids and protein. 2) Optimum sea tangle hot water extraction condition were 60～65$^{\circ}C$ for 1 hour which was cheap operating cost and high yield of good taste components. 3) The membrane flux was more higher GR 51 PP. and increase of flow rate permeate flow rate was accordingly increased. but limiting flow volume was 3.7 l/min. 4) It was found that ultration was relatively of higher recovery rate, solid and taste components, and low rejection coefficient rate than diafiltration.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.478-481
• /
• 2001

The spent petrochemical catalyst used in the manufacturing process of terephthalic-acid contains valuable metals such as cobalt and manganese. To recover these metals, sulfuric acid leaching was performed with hydrogen peroxide as a reducing agent. Low extractions of Mn, Co and Fe were obtained by sulfuric acid leaching without reducing agent. With adding hydrogen peroxide as a reducing agent, the high extraction of these metals could be obtained. Different from general leaching experiment, the extraction rates of metal components were decreased with increasing reaction temperature in this case. Under the optimum condition, the extraction rates of Mn, Co and Fe were 93.0%, 87.0% and 100% respectively.