• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.119-124
• /
• 2002

Generally, Portland cement concrete(PCC) pavements have the advantage of durability and superior surface friction when compared to most dense-graded asphalt. However, It is known that PCC pavements create more noise than asphaltic surfaces due to the noise from interaction of tire and pavement surface. Recently exposed aggregate concrete(EAC) pavement was sugested to reduce traffic noise. So in this paper, we considered several materials and mixture proportions for proper depth of exposed aggregate which was measured by the sand patching test, and then according to those relationships, we tried to find out dosage of retarding agents and optimum mixture proportions for expecting good effects to noise reduction. It were also evaluated sound level at every conditions of surface texture as like depth of aggregate exposed, profile peak, distance of aggregate and types of aggregate.

• Journal of Pharmaceutical Investigation
• /
• 제32권2호
• /
• pp.95-101
• /
• 2002

Matrix tablets of nifedipine (NP) were prepared with Eudragit, diluent (lactose or Ca. phosphate) and Mg. stearate employing two different preparation methods (wet granulation and direct compression) to develop its sustained-release dosage forms. The effects of various formulation factors on the dissolution rate of the drug were investigated. Dissolution test was studied in pH 6.8 phosphate buffer containing 1% sodium lauryl sulfate using the paddle method. Formulation factors were the type and content of Eudragit, the type of diluent and the tablet preparation method. The optimum formula of NP matrix tablet, which resulted in a similar dissolution profile to that from Adalat Oros used as a reference, was 30 mg NP, 10% Eudragit RS, 2% Mg. stearate and an adequate quantity of lactose to yield 500 mg weight using the wet granulation method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.3-8
• /
• 1998

This research is to examine the relationships between viscosity and fluidity according to binders in the super flowing concrete. And this research is described with respect to rheology concept, confined water ratio($\beta_p$) of binders in paste and mortar, also investigated experimentally the relationships between the relative flowing ratio ($\Gamma_m$) and the funneling velocity ratio($R_m$) on the mortar state according to the water binder ratio(W/B) and the dosage of the superplasticizer. From the confined water ratio tests, it is found that $\beta_p$ of the class C fly ash is higher than that of the class F fly and limestone in paste and mortar, therefore class F fly ash and limestone and super flowing concrete. The result of test, the optimum mix condition to the compactibility if satisfied when the replacement ratio is 30% and $K_p$ is 0.8 for the case of fly ash and limestone.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.25-29
• /
• 1995

To perform high-strength of concrete, fine powers of pozzolan such as fly ash, silica fume mixed with cement. But mobility of cement and concrete decreased due to using of these powers. To control decrease of this mobility, it is required that mobility is improved by using of chemical admixture such as superplasticizer. We used admixtures -NSF, NM-2, NT-2 etc- in order to improve mobility of cement paste being substituted by 10, 20% of pozzolans respectively. It proved that optimum dosage of NSF, NT-2 was 2.0% for being substituted 10%, 3.0% for 20% so as to increase mobility of cement paste mixed paste mixed with fine powers of pozzolan at W/C=0.40.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.715-718
• /
• 2001

This study uses traditional alum coagulation and sedimentation process to treat CMP wastewater from cleaning after polishing. The primary goal is to successfully recycle both solid fines and water for semiconductor manufacturing. Results indicated that CMP wastewater may be successfully treated to recover clean water and fine particles by alum coagulation. The optimum operating conditions for coagulation are as fellowing: alum dosage of 10 ppm, pH at 5, rapid mixing speed at 800 rpm, 5 min rapid mixing time, and long slow mixing time. The treated water with low turbidity and an average residual aluminum ion concentration of 0.23 ppm may be considered for reuse. The settled sludge after alum coagulation contains mainly SiO$_2$particle with a minor content of aluminum (1.7 wt%) may be considered as raw materials for glass and ceramic industry.

• 상하수도학회지
• /
• 제29권1호
• /
• pp.39-46
• /
• 2015

The degradation characteristics of perchloroethylene by ferrate(VI) oxidation have been studied. The degradation efficiency of perchloroethylene in aqueous solution was investigated at various values of ferrate(VI) dosage, pH, initial concentration of perchloroethylene and aqueous solution temperature. GC-ECD has been used to analyze the changes of perchloroethylene concentration. The optimum conditions of perchloroethylene degradation were obtained at pH 7.0 and $25^{\circ}C$ of aqueous solution temperature. Also, the experimental results showed that perchloroethylene removal efficiency increased with the decrease of initial concentration of perchloroethylene. Lastly intermediate products were identified by GC-MS techniques. Trichloroethylene and chloroform were identified as reaction intermediates.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.79-83
• /
• 1999

A cationic demand(CD) is a very useful indication for determining the optimum dosage rate of retention aids to the papermaking stock at the wet end. Polyelectrolyte titration has been most often used to determine a CD. Highly accurate results can be obtained by this method when the ionic strength of sample is low. But this is accompanied by the serious errors when the ionic strength is higher than that corresponding to 20 milli molar(mM) monovalent, 2 mM divalent or 0.2 mM trivalent ions because of no occurrence of the end point of titration. Therefore, it is very difficult or almost impossible for the conventional method to be applied to the industrial suspensions such as papermaking stock and industrial waste water. Then a novel method using chromophoric labeled cationic polymer which can be applicable to the sample with high ionic strength has been developed.

• KSBB Journal
• /
• 제14권4호
• /
• pp.470-475
• /
• 1999

Several enzyme were applied to Laubholz Bleached Kraft Pulp(LBKP) to evaluate the influence on beatability which was measured in Schopper Riegler value, and the results were compared with untreated pulp. Among the types of enzyme, cellulase was found to be the most effective. Addition of cellulase increased the beatability by 28% at optimum condition. Strength properties such as tensile strength and folding endurance also increased with enzymatic treatment by 12% and 46%, respectively. However, excessive dosage of cellulase had an adverse effect on strength properties in spite of the high beatability. Fibrillization by cellulase and destruction of fiber by excessive reaction was observed by Scanning Electron Microscopy(SEM).

• 한국환경보건학회지
• /
• 제35권1호
• /
• pp.53-57
• /
• 2009

In order to treat the complex wastewater containing organic compound and solids, pre-treatment system associated with molecular separation process were investigated. The reductions of COD and turbidity were obtained after coagulation processes using Alum (Aluminium sulfate, $Al_2(SO_4)_2{\cdot}18H_{2}O$) and PACl (poly aluminium chloride as 17% $Al_{2}O_{3}$). The results of study were as follows: using variable dosage of Alum, COD removal was highest at 4,000 mg/l, and the reduction of COD and turbidity was 42% and 92%, respectively. The optimum coagulation would be effective at pH 7.3 than pH 9.0 by the addition of alum at a concentration of 6,000 mg/l and PACl was add at 4.25% in raw complex wastewater with 2,000 mg/l alum at pH 7.3, the reduction of COD was reduced by 32%. But coagulation aid experiments indicated that PACl would be more effective in sludge separation ability than COD removal efficiency.

• Journal of Pharmaceutical Investigation
• /
• 제20권2호
• /
• pp.73-78
• /
• 1990

A sensitive fluorometric method using 9-fluorenylmethyl pentafluorophenyl carbonate (FMPC) as the fluorescent labeling agent was developed to determine D-penicillamine (D-PA). The fluorophore had excitation and emission wavelengths of 260 nm and 313 nm, respectively. After derivatization, the fluorescent product was separated, and quantified by spectrofluorometry. The derivative was highly fluorescent and stable. Optimum condition for the reaction was investigated. A linear response was obtained over the range of $4.0{\times}10^{-7}-5.0{\times}10{-6}\;M$ with the correlation coefficient of 0.999 (n=6). The procedure described was successfully applied to the determination of the dosage forms of capsule with the recovery of $98.62{\pm}0.57%$ (150 mg), $98.36{\pm}0.57%$, (250 mg).