• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.191-199
• /
• 2001

The oxidation and recrystallization behaviors of Ni-base single crystal superalloy, CMSX-2 were investigated to determine the condition of the preparation for transient liquid phase (TLP) bonding operations. The faying surfaces of CMSX-2 were worked by the shot peening, fine cutting and mechanical polishing treatments and the degree of working of treated surfaces was evaluated by the hardness test and X-ray diffraction method CMSX-2 was heat-treated at 1,173∼1.589k for 3.6ks in vacuum of 4mPa. The mechanically polished surface was slightly oxidized after heat treatment even in the vacuum atmosphere of 4mPa. The thickness of an oxide film increased with increasing the heating temperature and the surface roughness of the faying surface. Recrystallization occurred at the surface after heat treatment at above 1,423K when the hardness was increased more than Hv600 by the shot peening treatment while the mechanically polished or fine cut surfaces didn't recrystallized. Based on these results, it was clearfied that the mechanically polishing with fine abrasive grit could be used for the preparation of faying surface of CMSX-2 before bonding operation.

• Food Science and Preservation
• /
• v.3 no.2
• /
• pp.171-178
• /
• 1996

This study was carried out for the purpose of improving the persimmon vinegar. The acetic acid bacteria strain JST-3, using acetic acid fermentation was isolated from the traditional persimmon vinegar. The optimum conditions for high yield of acetic acid were studied in the shaking bath. Acetic acid bacteria was cultured at 3$0^{\circ}C$ for 4 days and transferred to persimmon alcoholic juice for acetic acid fermentation. The optimum initial acidity for acetic acrid fermentation was 1%(w/v) and the addition of glucose or yeast extract was observed to produce relatively low yield of acetic acid. Succinic and acetic acid were major organic acid in the persimmon vinegar, The contents of lactic acid which was known to increase off-flavor were very low. Sensory evaluation revealed that the persimmon vinegar prepared in this study was superior to two commercial ones in the aroma and taste.

• Food Science and Preservation
• /
• v.19 no.4
• /
• pp.492-500
• /
• 2012

This study was conducted to develop a sauce prepared with sweet pumpkin and Korea Doenjang. The optimum conditions for manufacturing sweet pumpkin-doenjang sauce were investigated using the response surface methodology, based on the central composition design. The amount of stock added, the thickening agent, and doenjang were used as the independent variables, and the sensory characteristics (taste, flavor, color, and overall acceptability) were used as the dependent variables to evaluate the optimum conditions for the preparation of the sauce. The optimum conditions for the maximized-responses variables in the preparation of the sauce were 448.5 g of sweet pumpkin stock, 331.5 g of the thickening agent, and 20.0 g of doenjang. The quality characteristics of sweet pumpkin-doenjang sauce that was manufactured at optimum conditions were as follow: 89.55% moisture content, 0.70% crude protein, 0.10% crude lipids, and 0.71% crude ash. The pH of the sauce was 5.96; total acidity, 0.08%; and soluble solids, 6.80$^{\circ}Brix$. The total polyphenol content of the sauce was 5.70 mg/L. The electron-donating ability and reducing power of the sauce were, 14.24% and 1.64 OD, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.319-327
• /
• 2008

The purpose of this study is to propose the development of high quality electromagnetic wave shielding fabrics. Silver nitrate is used for polyester fabric as an electromagnetic wave shielding material. The effects of activators and electroless silver plating condition on the evenness and adhesion of silver to fabrics, are observed through the SEM micrographs. Surface morphology and wash-ability are measured using SEM. The results are as follows: The optimum weight loss by alkaline hydrolysis of polyester fabrics is about 20%. The optimum concentration of $SnCl_2$ and $PdCl_2$in catalyst reaction using $PdCl_2$ as an activator is 2.5g/L and 0.5g/L, respectively. The optimum concentration of dextrose to improve adhesion between the silver plating and fabrics is 45g/L. The optimum concentration of silver nitrate in the catalyst reaction, using $PdCl_2$ as an activator is 56g/L, respectively. The optimum plating temperature and time are $15^{\circ}C$ and 30minutes, respectively.

• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.81-90
• /
• 1989

High purity alumina and amorphous silica were prepared from Ha-dong kaolin by means of appliance of sulfuric acid. The effect of sulfuric acid concentration, reaction temperature and reaction time on the formation of aluminum sulfate was investigated. The precipitation conditions ofaluminum sulfate from the sulfuric acid solution with ethanol and ammonium hydroxide were deteremined. In the optimum condition, the conversion of aluminum oxide in kaolin to aluminum oxide powder was 85.0 percent. Alumina powder was prepared by calcination of the precipitates, and its purity was 99.0 percent.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.79-79
• /
• 2010

In this work a PMTA(poly m-phenylene terephthal amide) polymer was synthesized by using new solvent to produce film composite. This Film composite membrane based on PMTA were prepared with 1,3-phenylenediamine(MPD), terephthaloyl chloride (TPC) and Co-solvent (NMP with added $CaCl_2$) was adopted for synthesize PMTA polymer. A series of synthetic experiments were done, aimed to find the optimum condition of polymerization.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.69-70
• /
• 2008

The study has attempted to prepare nanocapsules containing Tricrecyl phosphate by Emulsion-diffusion method. The study has focused on finding a optimum condition for preparering nano capsules and effect on size distribution and surface morphology.

• Journal of the Korean Ceramic Society
• /
• v.43 no.1 s.284
• /
• pp.16-21
• /
• 2006

The preparation of $TiB_2$ by SHS in $B_2O_3-Mg-TiO_2$ system was investigated in this study. In the preparation of $TiB_2$, the effect on reactivity and reaction products of the initial pressure of inert gas in reactor, the content of Mg and $TiO_2$ in mixture was investigated. The minimum initial pressure of inert gas in reactor for SHS reaction in this system was 5atm, and as the pressure increased, the concentration of unreacted Mg decreased and combustion temperature increased. At the initial inert gas pressure in reactor of 50atm, the optimum composition for the preparation of pure $TiB_2$ was $B_2O_3+5Mg+TiO_2$. The $TiB_2$ synthesized in this condition had an irregular shape and the particle size of $1\~3{\mu}m$.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.418-422
• /
• 2008

The preparation of FeB by SHS in $B_2O_3-Mg-Fe-Fe_3O_4$ system was investigated in this study. In the preparation of FeB, the effects of the initial pressure of inert gas in reactor, the content of Mg and $Fe_3O_4$ in mixture on the reactivity and reaction products was investigated. The minimum initial pressure of inert gas in reactor for SHS reaction in this system was 25 atm, and as the pressure increased, the concentration of unreacted Mg decreased and combustion temperature increased. At the initial inert gas pressure in reactor of 25 atm, the optimum composition for the preparation of pure FeB was $1.5B_2O_3$+3.43Mg+ 1.7Fe+$0.1Fe_3O_4$. The FeB synthesized in this condition had an irregular shape and the particle size of $5\;{\mu}m$.

• Journal of the Korean Ceramic Society
• /
• v.44 no.1 s.296
• /
• pp.37-42
• /
• 2007

The preparation of $TiC_{0.7}N_{0.3}$ powder by SHS in the system of $Ti-TiH_2-C$ ($N_2$ atmosphere) was investigated in this study. In the preparation of $TiC_{0.7}N_{0.3}$ powder, the effect of gas pressure, compositions such as Ti, $TiH_2$, C, and additive in mixture on the reactivity were investigated. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure $TiC_{0.7}N_{0.3}$ was $0.75Ti+0.25TiH_2+0.7C+0.5NaCl$. The $TiC_{0.7}N_{0.3}$ powder synthesized in this condition was a single phase with irregular shape.