• 산업식품공학
• /
• 제14권2호
• /
• pp.112-117
• /
• 2010

생강이 가지고 있는 항산화력을 최대화 시키기 위해 다양한 제조 공정에서 흑생강을 제조하였다. 증숙 온도 및 시간에 따른 DPPH radical 소거능을 측정하였고, 이를 반응표면 분석법에 의해 최적화된 제조 공정을 선정하였다. DPPH radical 소거능을 최대화 할 수 있는 최적 점을 설정한 결과 93.2$^{\circ}C$에서 6시간의 증숙 공정이 설정되었다. 제조한 흑생강을 음료로 개발하기 위해, 매실 농축액과 꿀을 혼합하여 기능성과 선호도가 높은 음료를 제조하였다. DPPH radical 소거능, 플라보노이드 함량, 관능평가의 canonical 계수를 이용하여 수적 최적화를 통하여 최적 배합비를 구한 결과, 흑생강 추출물 14.2%, 매실농축액 5%, 꿀 10.8%로 나타났고 desirability가 0.615로 설정되었다. 이때의 종속 변수값들은 DPPH radical 소거능 46.0 mg/L, 플라보노이드 함량 29.9 mg/L, 선호도 5.284로 예측되었다.

• 공업화학
• /
• 제21권3호
• /
• pp.301-305
• /
• 2010

본 연구에서는 도금전처리 공정에서 사용되는 다양한 조성의 맞춤형 알칼리계 탈지제를 개발하고, 탈지제의 수명을 예측함으로 효율을 높임과 동시에 공정품의 불량을 줄이고자 하였다. 알칼리계 탈지제는 침지형 탈지제로 NaOH, $Na_2CO_3$, $Na_2SiO_3$, SLS 등을 일정비율로 첨가하여 제조하였으며, 제조된 탈지제의 성능평가를 위해 알칼리계 탈지액의 온도를 $40{\sim}50^{\circ}C$로 설정하여 30~40 min 동안 오염된 철 시편을 넣은 후 오염물을 제거하였다. 오염물이 제거된 시편은 물방울 맺힘실험과 Hull-cell 도금분석을 통해 탈지제의 성능 및 수명을 확인하였다. 최적 탈지제의 조성은 NaOH (30 g/L) + SLS (6.0 g/L) + $Na_2SiO_3$ (2.0 g/L) + $Na_2CO_3$ (40 g/L)을 추천할 수 있으며, 물방울맺힘 실험과 Hull-cell 도금 분석 결과 최적 탈지조건은 $50^{\circ}C$, 35 min인 것으로 나타났다.

• 한국수산과학회지
• /
• 제54권3호
• /
• pp.261-270
• /
• 2021

This study was conducted to optimize the processing of seasoned salmon Oncorhynchus keta jerky (SSJ) using response surface methodology (RSM). For seasoning sauces-blending conditions of jerky using the RSM program, salt [X₁, % (w/v)] and amino-basic material [X₂, % (w/v)] were chosen as independent variables, and salinity (Y₁) and amino-N (Y₂) were chosen as dependent variables. The optimum conditions of X₁ and X₂ were 1.2% and 12.9%, respectively. To optimize drying conditions of seasoned salmon jerky using RSM program, soaking time (X₁, min), drying temperature (X₂, ℃) and drying time (X₃, min) were chosen as independent variables, and moisture content (Y₁), hardness (Y₂) and overall acceptance (Y₃) were chosen as dependent variables. Optimum conditions of X₁, X₂ and X₃ were 183.0 min, 62.5℃ and 351.0 min, respectively. In the sensory evaluation, the scores for taste, flavor, and texture for of SSJ were higher than those for a commercial product. The results suggest that the developed seasoned salmon jerky can be industrialized.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.131-139
• /
• 2020

The current study focused on the preparation of low-cost PVC-based adsorbing membrane. Metakaolin, as available adsorbent, was embedded into the PVC matrix via solution blending method. The as-prepared PVC/metakaolin mixed matrix membranes were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, atomic force microscopy (AFM), pure water permeability and contact angle measurements. The results confirmed the improvement of PWP and hydrophilicity due to the presence of metakaolin in the PVC matrix. Additionally the structure of PVC membrane was changed due to the incorporation of metakaolin in the polymer matrix. The static adsorption capacity of all samples was determined through dye removal. The effect of metakaolin dosage (0-7%) and pH (4, 8, 12) on dye adsorption capacity was investigated. The results depicted that the highest adsorption capacity was achieved at pH of 4 for all samples. Additionally, adsorption data were fitted on Langmuir, Freundlich, and Temkin models to determine the appropriate governing isotherm model. Finally, the dynamic adsorption capacity of the optimum PVC/metakaolin membrane was studied using dead-end filtration cell. The dye removal efficiency was determined for pure PVC and PVC/metakaolin membrane. The results demonstrated that PVC/metakaolin mixed matrix membrane had a high adsorption capacity for dye removal from aqueous solution.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.276-276
• /
• 2006

The incorporation of room temperature ionic liquids (IL) in poly (ethyleneoxide)-lithium salt (PEO-LiX) based solid polymer electrolytes is presently being studied as an effective means of enhancing the room temperature ionic conductivity of these electrolytes to acceptable levels for use in lithium batteries. In the present study, $PEO_{20}-LiTFSI$ solid polymer electrolyte was blended with three different ionic liquids, namely 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMIMTFSI), 1-butyl-3-methylimidazolium tetraflouroborate (BMIMBF4) and 1-butyl-3-methylimidazolium trifluromethanesulfonate ($BMIMCF_{3}SO_{3}$). The incorporation of all these ILs resulted in the enhancement of ionic conductivity, the effect being more pronounced at lower temperatures. Electrochemical properties of the blended electrolytes were studied by cyclic voltammetry, linear sweep voltammetry and interfacial resistance measurements. The optimum results were obtained with the blending of BMIMTFSI in the solid polymer electrolyte.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.53-59
• /
• 1997

Spin finish(NSFs) for synthetic fiber were prepared. NSF-3 was proved to be the best spin finish by testing the properties and emulsion stability, etc. of NSFs. NSF-3 prepared by blending of spindle oil 70g, paraffin wax 10g, glyceryl mono-oleate 5g, POE(10) nonylphenyl ether 4g, POE(20) sorbitan tri-oleate 4g, Na-dioctyl sulfosuccinate 4g, antistatic agent 2g and water 1g was excellent in its characteristics. Optimum physical conditions of nylon filament treated with NSF-3 according to the number of revolution of oil roller were obtained at conditions of 5.5rpm in the number of revolution of oil roller, 1.21% of oil pick up, and denier 69.2D.

• Elastomers and Composites
• /
• 제43권2호
• /
• pp.104-112
• /
• 2008

통상적인 고무블렌드 방법에 따라 개방식 2-롤밀을 사용하여 ethylene propylene diene terpolymer (EPDM)과 styrene butadiene rubber (SBR) 블렌드 배합물을 제조하여, 이들의 경화 특성, 기계적 성질 및 내오존성 등을 검토하였다. SBR함량이 증가할수록 가황곡선의 토크가 증가하였다. 최대 토크는 SBR 25wt% 일 때 가장 낮았으며 그 이상의 SBR 량에서는 직선적으로 증가하였다. 스코치시간 및 최적경화시간은 SBR고무 함량이 증가함에 따라 감소하였다. 경도는 SBR 함량이 50wt% 일 때 최고값을 보였으며 그 전후에서는 감소하는 경향을 보였다. 내오존시험에 있어서 소량의 EPDM 고무의 첨가에 의하여 내오존성이 크게 개선됨을 확인할 수 있었다.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.426-438
• /
• 2020

In this study, cherry kernel shell pyrolytic charcoal was synthesized (CKSC) and composite beads were obtained by blending this pyrolytic charcoal with chitosan and Fe₂O₃ nanoparticles (Fe-C-CKSC). Cr(VI) adsorption from aqueous solutions by Fe-C-CKSC composite beads and CKSC adsorbents was studied comparatively. The effects of Cr(VI) initial concentration, adsorbent dosage, contact time, pH and temperature parameters on Cr(VI) adsorption were investigated. Adsorption reached an equilibrium point within 120 min for CKSC and Fe-C-CKSC adsorbents. The maximum Cr(VI) removal was obtained at the initial pH value of 1.56 for CKSC and 2.00 for Fe-C-CKSC. The optimum adsorbent dosage was found to be 5 g/L for CKSC and 3 g/L for Fe-C-CKSC. Based on the Langmuir model, the maximum adsorption capacities were calculated as 14.455 mg/g and 47.576 mg/g for CKSC and Fe-C-CKSC, respectively. Thermodynamic and kinetic studies were performed. As a result of adsorption kinetics calculations, adsorption was found to be consistent with the pseudo second order kinetic model. Characterization of the synthesized adsorbents was performed by SEM, BET, FTIR and elemental analysis. This study has shown that low cost adsorbents CKSC and Fe-C-CKSC can be used in Cr(VI) removal from aqueous solutions.

• Geomechanics and Engineering
• /
• 제10권5호
• /
• pp.689-707
• /
• 2016

Soil stabilization is one of the useful method of ground improvement for soil with low bearing capacity and high settlement and unrequired swelling potential. Generally, the stabilization is carried out by adding some solid materials. The main objective of this research was to investigate the feasibility of stabilization of organic soils and sewage sludge to obtain low cost alternative embankment material by the addition of two different slags. Slags were used as a replacement for weak soil at ratios of 0%, 25%, 50%, 75% and 100%, where sewage sludge and organic soil were blended with slags separately. The maximum dry unit weights and the optimum water contents for all soil mixtures were determined. In order to investigate the influence of the slags on the strength of sewage sludge and organic soil, and to obtain the optimal mix design; compaction tests, the California bearing ratio (CBR) test, unconfined compressive strength (UCS) test, hydraulic conductivity test (HCT) and pH tests were carried out on slag-soil specimens. Unconfined compressive tests were performed on non-cured samples and those cured at 7 days. The test results obtained from untreated specimens were compared to tests results obtained from soil samples treated with slag. Laboratory tests results indicated that blending slags with organic soil or sewage sludge improved the engineering properties of organic or sewage sludge. Therefore, it is concluded that slag can be potentially used as a stabilizer to improve the properties of organic soils and sewage sludge.

• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.285-292
• /
• 2005

Extrusion process and physical properties of extrudates of pulp powder (TMP, thermomechanical pulp fibers) mixed with expanding additives was evaluated to develop biodegradable packaging materials. To find out the optimum condition, the status of extrusion process, coefficient of elastic and expansion ratio of extrudates were tested on the composites (wheat flour, soluble starch, polyvinyl alcohol), blending conditions of composites and moisture contents of extrudates. In case of material composition, wheat flour played a key role to keep extrusion process irrespective of the added amounts of soluble starch and polyvinyl alcohol. The coefficient of elastic of extrudates was increased and the expansion ratio was reduced as the added amounts of wheat flour increased. Also, the coefficient of elastic of extrudates was decreased as the moisture content of extrudates increased. The lowest coefficient of elastic was 439.55 kPa under the condition, of pulp powder mixed with $20\%$ of wheat flour based on pulp weight and $10\%$ of soluble starch based on wheat flour weight and controlled $20\%$(wb) of moisture content.