• Progress in Medical Physics
• /
• v.16 no.1
• /
• pp.24-31
• /
• 2005

The stereotactic radiosurgery (SRS) describes a method of delivering a high dose of radiation to a small tar-get volume in the brain, generally in a single fraction, while the dose delivered to the surrounding normal tissue should be minimized. To perform automatic plan of the SRS, a new method of multi-isocenter/shot linear accelerator (linac) and gamma knife (GK) radiosurgery treatment plan was developed, based on a physical lattice structure in target. The optimal radiosurgical plan had been constructed by many beam parameters in a linear accelerator or gamma knife-based radiation therapy. In this work, an isocenter/shot was modeled as a sphere, which is equal to the circular collimator/helmet hole size because the dimension of the 50% isodose level in the dose profile is similar to its size. In a computer-aided system, it accomplished first an automatic arrangement of multi-isocenter/shot considering two parameters such as positions and collimator/helmet sizes for each isocenter/shot. Simultaneously, an irregularly shaped target was approximated by cubic structures through computation of voxel units. The treatment planning method by the technique was evaluated as a dose distribution by dose volume histograms, dose conformity, and dose homogeneity to targets. For irregularly shaped targets, the new method performed optimal multi-isocenter packing, and it only took a few seconds in a computer-aided system. The targets were included in a more than 50% isodose curve. The dose conformity was ordinarily acceptable levels and the dose homogeneity was always less than 2.0, satisfying for various targets referred to Radiation Therapy Oncology Group (RTOG) SRS criteria. In conclusion, this approach by physical lattice structure could be a useful radiosurgical plan without restrictions in the various tumor shapes and the different modality techniques such as linac and GK for SRS.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.278-286
• /
• 2021

In this study, based on the Computational Fluid Dynamics (CFD) simulation model developed through previous study, inner environmenct of the modified glass greenhouse was predicted. Also, suggested the optimal shape of the greenhouse and location of the heat exchangers for heat energy management of the greenhouse using the developed model. For efficient heating energy management, the glass greenhouse was modified by changing the cross-section design and the location of the heat exchanger. The optimal cross-section design was selected based on the cross-section design standard of Republic of Korea's glass greenhouse, and the Fan Coil Unit(FCU) and the radiating pipe were re-positioned based on "Standard of greenhouse environment design" to enhance energy saving efficiency. The simulation analysis was performed to predict the inner temperature distribution and heat transfer with the modified greenhouse structure using the developed inner environment prediction model. As a result of simulation, the mean temperature and uniformity of the modified greenhouse were 0.65℃, 0.75%p higher than those of the control greenhouse, respectively. Also, the maximum deviation decreased by an average of 0.25℃. And the mean age of air was 18 sec. lower than that of the control greenhouse. It was confirmed that efficient heating energy management was possible in the modified greenhouse, when considered the temperature uniformity and the ventilation performance.

• Korean Journal of Environment and Ecology
• /
• v.18 no.4
• /
• pp.369-381
• /
• 2004

This study was achieved to present the way to restore the Seonheulgot pasture-grassland damaged by landuse and interference for a long time to evergreen broad-leaved forests as the native vegetation structure. As a result of analyzing ecological succession tendency of structure in survey area, we established the optimal restoration model. The total of survey sites were 26, and the classified plant community types were four types by M.I.P of dominant woody species. Finally we classified the four types based on diameter of dominant woody species in canopy layer. The six community types are as follows: Community I was runner-shrub forest, community II was evergreen broad-leaved shrub forest, and community III was evergreen broad-leaved forest of small diameter. Community IV and V were evergreen broad-leaved forest of middle diameter. Community Ⅵ was evergreen broad-leaved forest of large diameter. The number of constituent species was 24 in community I, 28 in community II as the shrub forest, 16 as the evergreen broad-leaved forest of small diameter, 29 in community III, 30 in community IV as the evergreen broad-leaved forest of middle diameter and 27 in community Ⅵ as the evergreen broad-leaved forest of large diameter. The range of Shannon's index of all communitys was from 0.8763 to 1.2630 and the Similarity index between the community composed of middle diameter woody species and large diameter woody species. The ecological succession of community I, II, and III were changed from pasture-grassland to broad-leaved forest and the structure of community IV, V, and Ⅵ was similar to evergreen broad-leaved forest in warm temperate region. We suggest the restoration planting model evergreen broad-leaved forest of in Seonheulgot pasture-grassland, as follows: The target restoration vegetation were Castanopsis cuspidata var. sievoldii community and Queycus glauca community. Castanopsis cuspidata var. sievoldii and Quercus glauca should be dominant woody species in canopy layer, the number of trees was 10 per 100$m^2$, and Castanopsis cuspidata var, sievoldii, Quercus glauca, Camellia japonica, and Eurya japonica should be dominant woody species in the understory layer, the number of trees was 14 per 100$m^2$.

• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.3-14
• /
• 2006

Music summarization means a technique which automatically generates the most importantand representative a part or parts ill music content. The techniques of music summarization have been studied with two categories according to summary characteristics. The first one is that the repeated part is provided as music summary and the second provides the combined segments which consist of segments with different characteristics as music summary in music content In this paper, we propose and evaluate two kinds of music summarization techniques. The algorithm using multi-level vector quantization which provides a repeated part as music summary gives fixed-length music summary is evaluated by overlapping ration between hand-made repeated parts and automatically generated summary. As results, the overlapping ratios of conventional methods are 42.2% and 47.4%, but that of proposed method with fixed-length summary is 67.1%. Optimal length music summary is evaluated by the portion of overlapping between summary and repeated part which is different length according to music content and the result shows that automatically-generated summary expresses more effective part than fixed-length summary with optimal length. The cluster-based algorithm using 2-D similarity matrix and k-means algorithm provides the combined segments as music summary. In order to evaluate this algorithm, we use MOS test consisting of two questions(How many similar segments are in summarized music? How many segments are included in same structure?) and the results show good performance.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.382-387
• /
• 2014

The PC/ABS blends were manufactured with high shear rate processing. Changes of the blend morphology were analyzed according to the screw speed and processing time. To find optimal conditions of the high shear rate processing of the PC/ABS blend, blend morphology and size of the dispersed phase, ABS, were observed with a SEM. Also, tensile properties of the PC/ABS blends were measured to investigate the effect of the high shear rate process with the screw speed of 500 rpm to 3000 rpm for processing times of 10s to 40s. Especially, to observe the dispersed phase of the PC/ABS blend clearly, fracture surfaces of the PC/ABS blend were etched with chromic acid solution. As screw speed and processing time increase, dispersed phase size of the PC/ABS blend decreases and mechanical properties of the blend decrease as well. Especially, at screw speed over than 1000 rpm of high shear rate processing, mechanical properties of the PC/ABS blends decrease drastically due to the degradation of the blend during the high shear rate processing. Consequently, the optimal condition of screw speed of the high shear processing of the PC/ABS blend is set at 1000rpm, in this study. Under optimal condition, the PC/ABS blend has relatively high mechanical properties with the relatively stable micro-structure having nanometer scale dispersed phase.

• Korean Journal of Social Welfare Studies
• /
• v.42 no.3
• /
• pp.291-327
• /
• 2011

The purpose of this study is to classify the type of retirement process among the mature-aged in Korea. The study used the panel data from Korean Labor Panel (year2~6) for the classification of retirement process through Optimal Matching and Cluster Analysis. Classification is made in 5 categories as 'peripheral-economically active', 'private-transfer dependent', 're-entering limited', 'securely exiting', 'exit-and-reentering'. First, "peripheral-economically active" is a group which frequently experienced job status change and work insecurity. Second, "private-transfer dependent" is a group in which private transfer is likely to be supplements income in the incidence of unemployment. Third, "re-entering limited" is a group in which the proportion of no financial support combined with the absence of any economic activity is the largest. Fourth, the type "Securely exit" is th group whose members switches over to non-economically active status with pension receipt. The last type is "exit-and-reenter" that the member are highly possible to reenter in the labor market and stay in long time regardless of with or without pension plan. To examine the inequality among the types of retirement process, the duration of each status is analyzed. First, in the situation of being non-economically active, the duration of status is maintain public pension receiving and duration stabile in "securely exit" group. For "private-transfer dependent" type, members are mostly dependent on private financial support and that duration of it is longest. Through the analysis of retirement process without under other financial supports, it is "securely-exiting" type for which the duration of full-time employment is longest. It appears that the duration of part-time employment is longest in "peripheral-economically active" type. And for the case of non-waged employment it is "exit-and-reenter" type. Finally, the redistribution policy based on life course perspective is necessary to prevent that the opportunity in the structure before retirement stage and the unfavorable position in labor market make worse disadvantage in retirement process and after that.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.107-118
• /
• 2016

The advent of 5G mobile communications, which is expected in 2020, will provide many services such as Internet of Things (IoT) and vehicle-to-infra/vehicle/nomadic (V2X) communication. There are many requirements to realizing these services: reduced latency, high data rate and reliability, and real-time service. In particular, a high level of reliability and delay sensitivity with an increased data rate are very important for M2M, IoT, and Factory 4.0. Around the world, 5G standardization organizations have considered these services and grouped them to finally derive the technical requirements and service scenarios. The first scenario is broadcast services that use a high data rate for multiple cases of sporting events or emergencies. The second scenario is as support for e-Health, car reliability, etc.; the third scenario is related to VR games with delay sensitivity and real-time techniques. Recently, these groups have been forming agreements on the requirements for such scenarios and the target level. Various techniques are being studied to satisfy such requirements and are being discussed in the context of software-defined networking (SDN) as the next-generation network architecture. SDN is being used to standardize ONF and basically refers to a structure that separates signals for the control plane from the packets for the data plane. One of the best examples for low latency and high reliability is an intelligent traffic system (ITS) using V2X. Because a car passes a small cell of the 5G network very rapidly, the messages to be delivered in the event of an emergency have to be transported in a very short time. This is a typical example requiring high delay sensitivity. 5G has to support a high reliability and delay sensitivity requirements for V2X in the field of traffic control. For these reasons, V2X is a major application of critical delay. V2X (vehicle-to-infra/vehicle/nomadic) represents all types of communication methods applicable to road and vehicles. It refers to a connected or networked vehicle. V2X can be divided into three kinds of communications. First is the communication between a vehicle and infrastructure (vehicle-to-infrastructure; V2I). Second is the communication between a vehicle and another vehicle (vehicle-to-vehicle; V2V). Third is the communication between a vehicle and mobile equipment (vehicle-to-nomadic devices; V2N). This will be added in the future in various fields. Because the SDN structure is under consideration as the next-generation network architecture, the SDN architecture is significant. However, the centralized architecture of SDN can be considered as an unfavorable structure for delay-sensitive services because a centralized architecture is needed to communicate with many nodes and provide processing power. Therefore, in the case of emergency V2X communications, delay-related control functions require a tree supporting structure. For such a scenario, the architecture of the network processing the vehicle information is a major variable affecting delay. Because it is difficult to meet the desired level of delay sensitivity with a typical fully centralized SDN structure, research on the optimal size of an SDN for processing information is needed. This study examined the SDN architecture considering the V2X emergency delay requirements of a 5G network in the worst-case scenario and performed a system-level simulation on the speed of the car, radius, and cell tier to derive a range of cells for information transfer in SDN network. In the simulation, because 5G provides a sufficiently high data rate, the information for neighboring vehicle support to the car was assumed to be without errors. Furthermore, the 5G small cell was assumed to have a cell radius of 50-100 m, and the maximum speed of the vehicle was considered to be 30-200 km/h in order to examine the network architecture to minimize the delay.

• Korean Journal of Environment and Ecology
• /
• v.27 no.2
• /
• pp.219-229
• /
• 2013

This research is performed in order to suggest seasonal effective research time that is applied to wild birds research which lives in a forest. The subject area of this research is Mulgun-ri village forest in Samdong-Myeon, Namhe-gun. To investigate suitability of the project, existing land-use, existing vegetation, vegetational structure, and etc. of the subject and whole area are figured out. To suggest adequate research time, based on seasonal sun rise and set time for 3days, repetitive research is performed at hourly intervals. The subject area is connected with a forest and is possible for forest wild birds to flows in and provides various habitats and feeding areas. And also the subject area is a appropriate area for wild birds research and is like a natural forest in that a layer structure development of the forest itself, a distribution of Zelkova serrata and Aphananthe aspera and so on. 105 species which is observed in subject area are categorized and mountain birds are classified. After time-based peak value is selected in each season, hourly species richness, diversity, and index of similarity are analyzed as compared with the appearing number of species and individual bird. As a result, 7~11 hour is the most effective time in spring, and 8~9 hour is the best time. In summer, 6~9 hour is the most appropriate time when whole appearing species are similar to species structure. In fall, 7~11(30~60 minutes after sun rise) when wild birds movements are vigorous is analyzed easy to observe and 8~9 hour is the most appropriate research time because each analysis shows the best values. In winter, 7~12 hour is the most effective time although 10~11 hour is the best time but it is decided that similar results are drawn because hourly deviation is not so big except 1 hour before sun rise. In every four season, it is decided that 30~60 minutes after sun rise is appropriate to research a group of wild birds in the subject area.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.4773-4780
• /
• 2014

Background: To investigate the effects of small interference RNA (siRNA) targeting BCR/ABL mRNA on proliferation and apoptosis in the K562 human chronic myeloid leukemia (CML) cell line and to provide a theoretical rationale and experimental evidence for its potential clinical application for anti-CML treatment. Materials and Methods: The gene sequence for BCR/ABL mRNA was found from the GeneBank. The target gene site on the BCR/ABL mRNA were selected according to Max-Planck-Institute (MPI) and rational siRNA design rules, the secondary structure of the candidate targeted mRNA was predicted, the relevant thermodynamic parameters were analyzed, and the targeted gene sequences were compared with BLAST to eliminate any sequences with significant homology. Inhibition of proliferation was evaluated by MTT assay and colony-formation inhibiting test. Apoptosis was determined by flow cytometry (FCM) and the morphology of apoptotic cells was identified by Giemsa-Wright staining. Western blotting was used to analyze the expression of BCR/ABL fusion protein in K562 cells after siRNA treatment. Results: The mRNA local secondary structure calculated by RNA structure software, and the optimal design of specific siRNA were contributed by bioinformatics rules. Five sequences of BCR/ABL siRNAs were designed and synthesized in vitro. Three sequences, siRNA1384, siRNA1276 and siRNA1786, which showed the most effective inhibition of K562 cell growth, were identified among the five candidate siRNAs, with a cell proliferative inhibitory rate nearly 50% after exposure to 12.5nmol/L~50nmol/L siRNA1384 for 24,48 and 72 hours. The 50% inhibitory concentrations ($IC_{50}$) of siRNA1384, siRNA1276 and siRNA1786 for 24hours were 46.6 nmol/L, 59.3 nmol/L and 62.6 nmol/L, respectively, and 65.668 nmol/L, 76.6 nmol/L, 74.4 nmol/L for 72 hours. The colony-formation inhibiting test also indicated that, compared with control, cell growth of siRNA treated group was inhibited. FCM results showed that the rate of cell apoptosis increased 24 hours after transfecting siRNA. The results of annexinV/PI staining indicated that the rate of apoptosis imcreased (1.53%, 15.3%, 64.5%, 57.5% and 21.5%) following treamtne with siRNAs (siRNA34, siRNA372, siRNA1384, siRNA1276 and siRNA1786). Morphological analysis showed td typical morphologic changes of apoptosis such as shrunken, fragmentation nucleus as well as "apoptotic bodies" after K562 cell exposure to siRNA. Western blot analysis showed that BCR/ABL protein was reduced sharply after a single dose of 50nmol/L siRNA transfection. Conclusions: Proliferation of K562 cells was remarkbly inhibited by siRNAs (siRNA1384, siRNA1276 and siRNA1786) in a concentration-dependent manner in vitro, with effective induction of apoptosis at a concentration of 50 nmol/L. One anti-leukemia mechanism in K562 cells appeared that BCR/ABL targeted protein was highly down-regulated. The siRNAs (siRNA1384, siRNA1276 and siRNA1786) may prove valuable in the treatment of CML.

• Journal of Nutrition and Health
• /
• v.48 no.6
• /
• pp.542-557
• /
• 2015

Purpose: The aim of this study is to develop an evaluation tool for operation of food safety and nutrition education projects for middle class elderly using the concept of the balanced score card. Methods: After the draft of the evaluation tool for the elderly training projects was completed, it was revised into the questionnaire and the validity of the indicators was tested by the Delphi group. The validity of the indicators was rated using a 5-point scale. The Delphi group consisted of 26 experts in the education sector, 16 government officials, and 24 professionals of the related area in communities. The first round test was conducted from July 9 to July 17, 2012, and 45 persons responded. The second round test was conducted from July 18 to July 25 and 32 persons responded. Results: The indicators, which were answered by more than 75 percent of the experts as 'agree' (4 points), 'strongly agree' (5 point) were included as the final indicators for the evaluation tool: 28 items out of 36 in outcome perspectives, 9 items out of 12 in process perspectives, and 17 out of 20 items in structure perspectives. The score was allocated as 50 points for outcome indicators, 20 points for process indicators, and 30 points for structure indicators. Conclusion: Completion of the evaluation tool is a prerequisite to determine whether the program is effectively implemented. The monitoring tool developed in the study could be applied for identification of the most optimal delivery path for the food safety and nutrition education program, for the spread of the food safety and nutrition education program for middle class elderly.