• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.281-289
• /
• 1999

Small-scale hydropower projects at existing agricultural reservoirs can contribute to produce electric energy by maximizing the use of releases from the reservoirs. The irrigation water duration, the reservoir hydropower simulation, and the nonlinear programming model are employed to estimate potential hydroelectric energy at an existing reservoir. The nonlinear programming model consists of finding a maximum hydroelectric energy subject to irrigation water demand constraints. The sample reservoir given a set of inflow and irrigation water is considered. The optimal solutions by the optimization model yield the most hydroelectric energy for the analysis period in the three methods. Consequently, the nonlinear programming model uses the most water for hydropower generation with respect to the total inflow of the sample reservoir. It is also found that additional storage by increasing the normal water level of the sample reservoir does not significantly increase the annual hydroelectric energy for the given reservoir. It is expected that the optimization model and the proposed procedure for estimating potential hydroelectric energy can be applied to evaluate feasibility analysis for small scale hydropower additions at existing agricultural dams.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.220-226
• /
• 2012

Pure zirconia and $x$ mol% calcia partially stabilized zirconia ($x$ = 1.5, 3, and 8) nanopowders were synthesized by hydrothermal method with various reaction temperatures for 24 hrs. The precipitated precursor of pure zirconia and $x$ mol% calcia doped zirconia was prepared by adding $NH_4OH$ to starting solutions; resulting sample was then put into an autoclave reactor. The optimal experimental conditions, such as reaction temperatures and times and amounts of stabilizer CaO, were carefully studied. The synthesized $ZrO_2$ and $x$ mol% CaO-$ZrO_2$ ($x$ = 1.5, 3, and 8) powders were characterized by XRD, SEM, TG-DTA, and Raman spectroscopy. When the hydrothermal temperature was as low as $160^{\circ}C$, pure $ZrO_2$ and $x$ mol% CaO-$ZrO_2$ ($x$ = 1.5 and 3) powders were identified as a mixture of monoclinic and tetragonal phases. However, a stable tetragonal phase of zirconia was observed in the 8 mol% calcia doped zirconia nanopowder at hydrothermal temperature above $160^{\circ}C$. To observe the phase transition, the 3 mol% CaO-$ZrO_2$ and 8 mol% CaO-$ZrO_2$ nanopowders were heat treated from 600 to $1000^{\circ}C$ for 2h. The 3 mol% CaO-$ZrO_2$ heat treated at above $1000^{\circ}C$ was found to undergo a complete phase transition from mixture phase to monoclinic phase. However, the 8 mol% calcia doped zirconia appeared in the stable tetragonal phase after heat treatment. The result of this study therefore should be considered as the preparation of 8 mol% CaO-$ZrO_2$ nanopowders via the hydrothermal method.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.426-439
• /
• 1999

본 논문에서는 웹(World Wide Web)에서 사용자가 손쉽고 편리하게 이용할 수 있는 멀티미디어 대중교통 안내시스템 개발 경험을 소개한다. 개발된 시스템은 클라이언트와 서버 시스템, 경로탐색 시스템, 교통정보 저장 시스템, 노선 및 정류장 관리 시스템으로 구성되어 있다. 클라이언트에서 작동되는 사용자 인터페이스는 직관적으로 이해가 쉽고, 사용이 편리하며 인터액티브한 멀티미디어 대중 교통안내 서비스를 제공한다. 서버 시스템은 교통정보 수집 시스템으로부터 입력되는 데이타와, 경로탐색 시스템, 교통정보 저장 시스템과 연동되어 클라이언트의 요구사항을 처리하고 그 결과를 사용자에게 돌려준다. 수정된 A* 알고리즘을 이용하는 경로탐색 시스템은 최적경로를 탐색하며, 교통정보 저장 시스템은 현재 교통상황, 정류장, 노선, 지도 등의 정보를 저장한다. 노선 및 정류장 관리시스템은 시스템 관리자가 노선 또는 정류장 관리를 서버 화면의 지도상에서 효율적으로 수행할 수 있는 도구이다. 본 논문에서 다루는 대중교통 안내시스템은 Java로 구현하였기 때문에 확장과 이식이 용이하며, 시스템 유지보수 비용이 적게 드는 장점을 가지고 있다. 그리고, 웹 브라우저가 동작되는 환경에서는 어디서나 쉽게 접근이 가능하며 향후 구축될 Intelligent Transportation Systems(ITS)의 한 모듈로써 바로 작동될 수 있을 뿐만 아니라, 현재 인터넷상에서 제공되는 다양한 서비스와도 연동이 가능하다.Abstract This paper introduces our experience for developing a public transportation guidance system, which facilitates the World-Wide Web(WWW) to provide users with easier access and use. The proposed system is composed of four subsystems: client/server system, path search system, traffic data storage system, and traffic raw-data management system. The user interface in clients utilizes Java to furnish users with multimedia data accessibility and interactivity. The server processes clients' requests based on the traffic data coming from remote sensing devices and interacts with the path search system and traffic data storage system to provide users with the results. The path search system, which uses a modified A* algorithm, produces optimal solutions based on dynamic traffic data. The traffic data storage system stores the current traffic information together with the geographical information about the b$us_way routes. The traffic raw-data management system is a graphical user interface which enables the system manager to handle the traffic information easily on the map in the terminal screen. The system has considerable benefits such as portability, scalability, and flexibility since it is implemented using Java. Also, it can be extended to an integrated Intelligent Transportation Systems(ITS) which includes a variety of information on the Internet as well as traffic information.n.

• Journal of Food Hygiene and Safety
• /
• v.28 no.4
• /
• pp.287-292
• /
• 2013

The efficient elution of viruses from contaminated food is a critical step for its detection. In this study, conditions optimal for enteric viral recovery from three leafy vegetables (cabbage, lettuce, sesame leaf) and three root vegetables (carrot, onion, mooli) were analyzed to find common buffers (statistically not different) applicable to the leafy and root vegetables. Viral recovery varied depending on the food matrices or elution buffers. Buffer solutions containing 0.25M threonine / 0.3M NaCl (pH 9.5) or 0.25M glycine / 0.14M NaCl (pH 9.5) could efficiently recover poliovirus from five out of six vegetables. The threonine buffer was applied to one leafy vegetable (sesame) and one root vegetable (carrot) for genogroup II norovirus (NoV) detection. The detection sensitivity was significantly higher from the leafy vegetable compared to the root vegetable. The use of these common elution buffers should facilitate the detection of low levels of NoV and other enteric viruses in a wide range of vegetables.

• Journal of Korea Water Resources Association
• /
• v.30 no.4
• /
• pp.347-355
• /
• 1997

In this study, the applicability of genetic algorithms into the parameter estimation of storage function method for flood routing model is investigated. Genetic algorithm is mathematically established theory based on the process of Darwinian natural selection and survival of fittest. It can be represented as a kind of search algorithms for optima point in solution space and make a reach on optimal solutions through performance improvement of assumed model by applying the natural selection of life as mechanical learning province. Flood events recorded in the Daechung dam are selected and used for the parameter estimation and verification of the proposed parameter estimation method by the split sample method. The results are analyzed that the performance of the model are improved including peak discharge and time to peak and shown that the parameter Rsa, and f1 are most sensitive to storage function model. Based on the analysis for estimated parameters and the comparison with the results from experimental equations, the applicability of genetic algorithm is verified and the improvements of those equations will be used for the augmentation of flood control efficiency.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.29-36
• /
• 2015

In this study, to examine the use of sulfur polymer as a coating agent for concrete, durability and hazard evaluations were performed. The result of the evaluation indicated that the chemical resistance of the coating agent for concrete was outstanding against acidic, base, and alkaline solutions. The evaluation of the bond strength after an accelerated weathering test depending on the mixing condition indicated that the most outstanding strength characteristic was obtained when silica powder and fly ash were mixed at the same time. The bond strength exceeded 1 MPa in every mixing condition even after the repeated hot and cold treatment of the coating agent specimen for concrete, and the SFS mix proportion showed the highest bond strength. The examination of the accelerated carbonation and chloride ion penetration resistance of the concrete coated with the coating agent indicated that the specimen coated with the coating agent using silica powder as a filler showed the most outstanding durability. When a fish toxicity test was performed to examine the hazard of the use of the functional polymer as a coating agent for concrete, the functional polymer was found to have no effect on the organisms. When the chemical resistance, freezing and thawing resistance, carbonation, and chloride ion penetration resistance of the coating agent were considered, substituting silica powder and fly ash as the fillers of the functional polymer by 20%, respectively, was the optimal level in the range of this study.

• Korean Journal of Plant Resources
• /
• v.30 no.1
• /
• pp.50-57
• /
• 2017

This study aimed to investigate the morphological characteristics and optimal germination conditions in seeds of Arabis pendula L., a traditionally edible and medicinal plant. The external seed shape was circular-obovate with narrow wings and dark brown. The seed length and width were 1.25 mm and 1.47 mm, respectively. The seeds were exalbuminous and the embryo was a bent type. Seed germination was the highest (49.7%) at $20^{\circ}C$ under dark conditions among the various temperature and light conditions applied. However, under the dark condition, the seedling was weak, overgrown, and the cotyledons were small and folded. To improve the germination and growth of seedlings, the seeds were pre-treated with $GA_3$ solutions of varying concentrations (0, 200, 500, and 1,000 mg/L). The seed germination and seedling growth were effectively improved by $GA_3$ pre-treatment. The germination rate was the highest (97.3%), mean germination time was the shortest (8.1 days), and a vigorous growth of seedlings was observed upon pre-soaking the seeds in 500 mg/L $GA_3$ solution. In conclusion, the best method for germination was pre-soaking in 500 mg/L $GA_3$ ($4^{\circ}C$, dark, 24 h) and incubating the seeds at $20^{\circ}C$ for 15 days.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.211-218
• /
• 2015

This paper introduces a 'divide-and-conquer' algorithm to the travelling salesman problem (TSP). Top 10n are selected beforehand from a pool of n(n-1) data which are sorted in the ascending order of each vertex's distance. The proposed algorithm then firstly selects partial paths that are interconnected with the shortest distance $r_1=d\{v_i,v_j\}$ of each vertex $v_i$ and assigns them as individual regions. For $r_2$, it connects all inter-vertex edges within the region and inter-region edges are connected in accordance with the connection rule. Finally for $r_3$, it connects only inter-region edges until one whole Hamiltonian cycle is constructed. When tested on TSP-1(n=26) and TSP-2(n=42) of real cities and on a randomly constructed TSP-3(n=50) of the Euclidean plane, the algorithm has obtained optimal solutions for the first two and an improved one from that of Valenzuela and Jones for the third. In contrast to the brute-force search algorithm which runs in n!, the proposed algorithm runs at most 10n times, with the time complexity of $O(n^2)$.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.208-217
• /
• 2011

The effects of pH and temperature on the removal of two dyes (neutral red; NR and malachite green oxalates; MG) from aqueous effluents using Maghnia montmorillonite clay in a batch adsorption process were investigated. The results showed the stability of the optical properties of MG in aqueous solution and adsorbed onto clay under wide range of pH 3-9. However, the interaction of NR dye with clay is accompanied by a red shift of the main absorption bands of monomer cations under pH range of 3-5, whereas, those of neutral form remains nearly constant over the pH range of 8-12. The optimal pH for favorable adsorption of the dyes, i.e. ${\geq}$90% has been achieved in aqueous solutions at 6 and 7 for NR and VM respectively. The most suitable adsorption temperatures were 298 and 318 K with maximum adsorption capacities of 465.13mg/g for NR and 459.89 mg/g for MG. The adsorption equilibrium results for both dyes follow Langmuir, Freundlich isotherms. The numerical values of the mean free energy $E_a$ of 4.472-5.559 kj/mol and 2.000-2.886 kj/mol for NR and MG respectively indicated physical adsorption. Various thermodynamic parameters, such as ${\Delta}H^{\circ}$, ${\Delta}S^{\circ}$, ${\Delta}G^{\circ}$ and Ea have been calculated. The data showed that the adsorption process is spontaneous and endothermic. The sticking probability model was further used to assess the potential feasibility of the clay mineral as an alternative adsorbent for organic ion pollutants in aqueous solution.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.555-562
• /
• 2016

Seismic design of braced frames that simultaneously considers economic issues and structural performance represents a rather complicated engineering problem, and therefore, a systematic and well-established methodology is needed. This study proposes a multi-objective seismic design method for an inverted V-braced frame with suspended zipper struts that uses the non-dominated sorting genetic algorithm-II(NSGA-II). The structural weight and the maximum inter-story drift ratio as the objective functions are simultaneously minimized to optimize the cost and seismic performance of the structure. To investigate which of strength- and performance-based design criteria for braced frames is the critical design condition, the constraint conditions on the two design methods are simultaneously considered (i.e. the constraint conditions based on the strength and plastic deformation of members). The linear static analysis method and the nonlinear static analysis method are adopted to check the strength- and plastic deformation-based design constraints, respectively. The proposed optimal method are applied to three- and six-story steel frame examples, and the solutions improved for the considered objective functions were found.