• Journal of Welding and Joining
• /
• 제30권4호
• /
• pp.44-48
• /
• 2012

H-beam used for stiffening the upper structure of ocean plant is cut in the various shapes. The cutting process of the H-beam is done manually and requires a long time and high cost. Therefore, automation of H-beam cutting is an important task. This research aims to develop a 3-D simulator to build the automatic H-beam cutting system and to determine the optimal cutting method. The automatic H-beam cutting system composes of 6 robots including 2 cutting robots hang to a crane and 1 conveyer. The appropriate system layout for covering the various sizes and types of H-beam was tested and determined using the simulator. The H-beam cutting system uses a hybrid type of plasma and gas cutting because of special cutting shapes of H-beam. The cutting area of each cutting method should be properly divided according to the size and shape of H-beam to shorten the total cutting time. Additionally the collision between a robot and a robot or a robot and H-beam should be avoided. The optimal cutting method for the shortest cutting time without the collision could be found for the various cutting conditions by use of the simulator. 2 simulation samples shows the availability of the simulator to find the optimal cutting method.

• 한국수자원학회논문집
• /
• 제55권1호
• /
• pp.59-70
• /
• 2022

상수도관망은 대표적인 사회기반시설로 수원에서 수용가에게 물을 공급하는 과정에서 병원성 미생물을 소독하기 위해 염소를 주입한다. 안전한 물의 공급을 위해 잔류염소 농도 기준(0.1-4.0 mg/L)을 유지하도록 규정하고 있으나, 사용자의 사용 패턴, 수령, 상수도관망의 형식 및 특징은 수리학적(i.e., 절점의 압력, 관로의 유속) 및 수질적(i.e., 잔류염소 농도) 특징에 영향을 미친다. 따라서, 본 연구에서는 Multi-objective Harmony Search (MOHS)를 사용하여 수질-수리 인자를 고려한 상수도관망 최적 설계 기법을 개발하였다. 설계인자로는 설계비용과 시스템 탄력성을 고려하였으며, 절점의 압력과 잔류염소 농도를 제약조건으로 적용하였다. 도출된 최적설계안은 상수도관망의 형식 및 특징에 따라 분석하였다. 이러한 최적설계안은 경제적인 측면과 수질 측면의 안전성을 충족할 수 있으며, 사용자의 사용성을 증가시킬 수 있다.

• 대한의용생체공학회:의공학회지
• /
• 제13권2호
• /
• pp.115-124
• /
• 1992

An algorithm has been proposed for the automatic detection of optimal epiand endocardial left ventricular borders from 2-D short axis echocardiogram which is degraded by noise and echo drop out. For the implementation of the algorithm, we modified Ballard's Generalized Hough Transform which can be applicable only for deterministic object border, and newly proposed Fuzzy Hough Transform method. The algorithm presented here allows detection of object whose exact shapes are unknown. The algorithm only requires an approximate model of target object based on anatomical data. To detect the approximate epicardial contour of left ventricle, Fuzzy Hough Transform was applied to the echocardiogram. The optimal epicardial contour was founded by using graph searching method which contains cost function analysis process. Using this optimal epicardial contour and average thickness imformation of left ventricular wall, the approximate endocardial line was founded, and graph searching method was also used to detect optimal endocardial contour.

• Ocean Systems Engineering
• /
• 제14권2호
• /
• pp.157-169
• /
• 2024

The sudden release of water from a dam failure can trigger bores on a flat surface and exert substantial impact forces on structures. This flow poses a high-risk flood hazard to downstream urban areas, making it imperative to study its impact on structures and devise effective energy dissipators to mitigate its force. In this study, a combination of Genetic Algorithm optimization and numerical modeling is employed to identify the optimal energy dissipator. The analysis reveals that a round arc-shaped structure proves most effective, followed by a triangular shape. These shapes offer wide adaptability in terms of structure dimensions. Structures with higher elevation, especially those with round or triangular shapes, demonstrate superior energy dissipation capabilities. Conversely, square-shaped structures necessitate minimal height to minimize impact forces. The optimal width for dissipating energy is found to be 0.9 meters, allowing for effective wave run-up and propagation. Furthermore, the force exerted on structures increases with higher initial water levels, but diminishes with distance from the dam, highlighting the importance of placement in mitigating impact forces.

• 수산해양기술연구
• /
• 제43권3호
• /
• pp.192-205
• /
• 2007

The objective of this study was to investigate the optimal shapes and arrangements of sinkers attached to net cages to prevent their deformation in a current. A series of model experiments were conducted in a circulating water channel, using 5 different types of sinker(high-weighted ball, low-weighted ball, columntype, egg-shaped and iron bar-framed) and 2 types of square net cage constructed from both Nylon Raschel netting and Nylon knotted netting, on a 1/20th scale. The deflection of the model nets against the flow was smallest with the iron bar-framed weight compared to the other four types of sinker. It was expected that the optimal shapes of sinkers would be either the ball or egg-shape; however, iron bar-framed weight actually had larger drag forces. The dispersed deployment of sinkers on the bottom frames of model net cages performed better with relatively slow flows, while the concentrated deployment at 4 corners functioned better with relatively fast flows, in preventing the nets from becoming severely deformed. The deformation of the net cages was larger for the Nylon knotted netting than the Nylon Raschel netting. With respect to flow resistance, the Nylon Raschel netting, rather than the Nylon knotted netting, was more suitable for construction of net cages.

• 복식문화연구
• /
• 제25권4호
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• 한국정밀공학회지
• /
• 제9권2호
• /
• pp.116-121
• /
• 1992

The optimal extrusion process for the rate sensitive materials have been developed in this study. The preliminary designs of the die shapes have been carried out to maintain constant strain rate during extrusion and the upper bound approach has been applied to define the process variables (the die entrance velocity and the die length) including the rheology during deformation. The result for the axisymmetric extrusion process has been verified with rigid-viscoplastic finite element analysis. It has been confirmed that the optimal die has wider band of constant strain rate than the conical one does.

• 한국경영과학회지
• /
• 제39권3호
• /
• pp.133-144
• /
• 2014

Naver, a leading search engine in South Korea, may show modified and reorganized search results for some trendy and popular keywords; when popular words such as the titles of soap operas and films are searched for,all the detailed and well-organized information regarding them can be presented. By recognizing that search engines may modify and reorganize search results for some popular keywords, we mathematically model the impact of the degree of modification of search results on the search engine's profit to derive its optimal modification degree. We show how the optimal degree of search result modification may change according to the different shapes of the search engine's advertising revenue function.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.1016-1023
• /
• 2006

When one opens the door of a microwave oven during its operation, twisting deformation of the door occurs, which may cause leakage of microwave through the gap between the door and the front plate. A numerical optimization is implemented to minimize the gap by maximizing twisting stiffness of the door of the oven. Design variables are deformed, which describe the shape of the bead in the horizontal and vertical flanges of the door frame. To minimize the twisting deformation, Two optimal design problems to find shapes of the bead in the flange are established. The problems are solved by a numerical optimization technique, their results being evaluated.

• 한국전산유체공학회지
• /
• 제14권1호
• /
• pp.62-69
• /
• 2009

The cooling system for electric devices of hybrid vehicles is examined. The present system is composed of coolant paths, inlet diffuser and heat sinks whose shapes are diamond and circular. In this work, inlet duct and fin arrays are combined in proposed models and examined by numerical calculations. Nusselt number and Reynolds number are considered for heat transfer performance. Main focus lies on the looking for optimal model for the cooling system adopted to compact driving module of a hybrid vehicle. The optimal model shows uniform flow patterns in the inlet diffuser and secondary flows after the fins attached to heat source. It is found that the vortical flows around the heat sinks are effective for heat removal mechanism.