• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.573-584
• /
• 2010

This paper considers the differences in the software execution environments in the testing phase and the operational phase to determine the optimal release time and warranty period of software systems. We formulate equations for the total expected software cost until the end of the software life cycle based on the NHPP. In addition, we derive the optimal release time that minimizes the total expected software cost for an imperfect debugging software reliability model. Finally, we analyze the sensitivity of the optimal testing and maintenance design related to variation of the cost model parameters based on the fault data observed in the actual testing process, and discuss the quantitative properties of the proposed model.

• Journal of the military operations research society of Korea
• /
• v.16 no.2
• /
• pp.135-150
• /
• 1990

This paper classifies faults into three types : simple, degenerated, and regenerated faults. This paper also deals with the characteristics of each type of fault to determine the software reliability based on the assumption; i. e., a system consisting of several subsystems (modules) which may be debugged simultaneously. For each type of fault, several formulas are developed to obtain the failure rate and the expected number of failures found during debugging. A model is developed based on the formulas of the failure rate and the expected number of failures to decide the optimal release time of a new software: minimizing the total cost with constraints restricting to the failure rate of each module in the software. By using this model, optimal release times are found for some cases; the eliminated faults are assumed simple faults only, regenerated faults only, simple and degenerated faults, and so on.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.147-156
• /
• 2011

The purpose of multipurpose reservoir operation in flood season is to reduce the peak flood at a control point by utilizing flood control storage or to minimize flood damage by controlling release and release time. Therefore, the most important thing in reservoir operation for flood season is to determine the optimal release and release time. In this study, goal programming is used for the optimal reservoir operation in flood season. The goal programming minimizes a sum of deviation from the target value using linear programming or nonlinear programming to obtain the optimal alternative for the problem with more than two objectives. To analyze the applicability of goal programming, the historical storm data are utilized. The goal programming is applied to the reservoir system operation as well as single reservoir operation. Chungju reservoir is selected for single reservoir operation and Andong and Imha reservoirs are selected for reservoir system operation. The result of goal programming is compared with that of HEC-5. As a result, it was found that goal programming could maintain the reservoir level within flood control level at the end of a flood season and also maintain flood discharge within a design flood at a control point for each time step. The goal programming operation is different from the real operation in the sense that all inflows are assumed to be given in advance. However, flood at a control point can be reduced by calculating the optimal release and optimal release time using suitable constraints and flood forecasting system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.15 no.1
• /
• pp.51-63
• /
• 1989

This paper considers software release problems based on Goel-Okumoto and S-shaped reliability growth models. Test of the software system is terminated after a preassigned time T, and it is released to the operational phase. It is assumed that correction cost of an error is increasing with test or operation time. Optimum software release time is obtained using total expected cost on the software life time as a criterion for optimization. In addition, optimal software release policies under the constraint of a software reliability requirement are discussed.

• Ocean and Polar Research
• /
• v.42 no.3
• /
• pp.225-231
• /
• 2020

The aim of this study was to examine optimal induction method for carpospore release from Agarophyton vermiculophyllum cystocarps for seedling production. We tested the effects of environmental factors on carpospore release by using five different induction methods; spontaneous, desiccation, low temperature, desiccation+low temperature, and osmotic shock. Also, carpospores release was estimated at three temperatures (20, 25, and 30℃), and then under combinations of three day lengths (8, 12, and 16h) and two irradiances (30 and 60 μmol photons m^-2 s^-1), after pretreatment at desiccation+low temperature for 2 hr. The number of carpospores released was between 113 ~ 682 spores /cystocarp/day and it was maximal in the desiccation+low temperature treatment. Optimal environmental conditions for carpospore release of A. vermiculophyllum were 25℃, 16 h, and 60 μmol photons m^-2 s^-1. The present results suggest that massive carpospores for seedling production of A. vermiculophyllum could be obtained under a combination of 25℃, 16 h, and 60 μmol photons m^-2 s^-1 after pretreatment in the desiccation+low temperature.

• Journal of Korean Society for Quality Management
• /
• v.17 no.2
• /
• pp.27-35
• /
• 1989

Software developers often allocate a significant amount of effort to software testing. But for most business-related software system it is natural to expect the continued discovery of defects after the software system is released into field. Such defects are usually very expensive to fix and have the potential to cause great damages to the users. It is important to stop testing the software and release it to the users at the correct time. In this paper, we propose the determination of the optimal number of software test oy minimizing a total expected software cost. A numerical example is used when the criterion is the expected profit. The result indicates that the proposed software release policy based on the number of software test can be a good alternative to the existing policy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.2
• /
• pp.175-182
• /
• 2017

We examined the effects of environmental factors on zoospore release and germling growth of the green tide alga Cladophora albida under various conditions of temperature${\times}$irradiance (zoospore release), temperature${\times}$irradiance${\times}$ nutrient (germling growth), and a single factor test of salinity. Zoospore release was maximized at $30^{\circ}C$ and $100{\mu}mol\;photons\;m^{-2}s^{-1}$ in the temperature irradiance experiment and at 34 psu in the salinity experiment. Maximum germling growth was observed at $25^{\circ}C$ with $100{\mu}mol\;photons\;m^{-2}s^{-1}$ and PES (Provasoli's Enriched Seawater) in the temperature irradiance nutrient experiment, and at 34 psu in the salinity experiment. Germlings grew faster at higher irradiances for a given temperature level, and also grew faster as salinity increased over the range of 5-34 psu. Overall, optimal environmental conditions for zoospore release were $30^{\circ}C$, $100{\mu}mol\;photons\;m^{-2}s^{-1}$ and 34 psu. Maximal germling growth occurred at $25^{\circ}C$, $100{\mu}mol\;photons\;m^{-2}s^{-1}$, PES, and 34 psu. C. albida blooms are most likely to occur under these optimal environmental conditions, as plentiful zoospore release and rapid germling growth lead to population growth.

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.221-231
• /
• 2012

Rayon fabrics were treated with some commercial non-formaldehyde and low-formaldehyde resins, and then their effect on the physicochemical properties of fabrics, including formaldehyde release, tear strength, shrinkage, and wrinkle recovery, were investigated respectively. Rayons treated with non-formaldehyde resin, little formaldehyde release was observed. Considering other factors, the optimal concentration of non-formaldehyde resin was shown to be 11-13%, and curing temperature was $170{\sim}175^{\circ}C$. In case of low-formaldehyde type, 9-11% resin concentration and curing temperature of $170{\sim}180^{\circ}C$ were recommended for optimal finishing condition. The choice and combination of resins and catalysts were also important factors, and preliminary considerations before resin-finishing of rayon are also important to get much better results.

• Textile Coloration and Finishing
• /
• v.24 no.2
• /
• pp.121-130
• /
• 2012

Cotton fabrics were treated with some commercial non-formaldehyde and low-formaldehyde resins, and then their effect on the physicochemical properties were respectively investigated including formaldehyde release, tear strength, shrinkage, and wrinkle recovery. Formaldehyde release less than 10ppm was obtained only by non-formaldehyde resin. Considering other factors, the optimal concentration of non-formaldehyde resin was shown to be 9-11%. In case of low-formaldehyde type, 5-7% resin concentration and curing temperature of $160{\sim}170^{\circ}C$ were recommended for optimal finishing condition. The choice and combination of resins and catalysts were also important factors, and preliminary considerations before treating cotton fabrics with resins used in this study are also important to get much better results.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1109-1112
• /
• 2005

The software reliability is defined, and not only the relations between testing time and reliability, but also the relation between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through evaluating the cost for each condition. Also, the release time is determined depending on the conditions of the first reliability, considering the specified reliability. The optimum release time is determined by simultaneously studying two optimum release time issues that determine both the cost related time and the specified reliability related time. And, each condition and limitation are studied. The trend of the optimum time is also examined.