• Korean Journal of Microbiology
• /
• v.40 no.1
• /
• pp.43-48
• /
• 2004

Bacillus megaterium F7-1 producing keratinolytic protease was isolated from decayed chicken feather. The optimal culture conditions for the production of keratinolytic protease by B. megaterium F7-1 were investigated. The composition of optimal medium for the keratinolytic protease was 0.2% glucose, 0.8% skim milk, 0.05% NaCl, 0.01 % $(K_2HPO_4$, 0.02%, $(KH_2PO_4$ and 0.01 % $MgCl_2$. Especially, skim milk was found to be the most effective compound in keratinolytic protease production. The optimal temperature and initial pH were 6.5 and $25^{\circ}C$, respectively. The keratinolytic protease production under optimal condition reached a maximum of 269 U/ml after 5 days of cultivation. B. megaterium F7-1 degraded 98% of the feather used in the optimized medium within 6 days.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.528-534
• /
• 2006

The purpose of this paper is to investigate the optimal operating condition for the hydrogen production by biogas reforming using the plasmatron induced thermal plasma. The component ratio of biogas($CH_4/CO_2$) produced by anaerobic digestion reactor were 1.03, 1.28, 2.12, respectively. And the reforming experiment was performed. To improve hydrogen production and methane conversion rates, parametric screening studies were conducted, in which there are the variations of biogas flow ratio(biogas/TFR: total flow rate), vapor flow ratio($H_2O/TFR$: total flow rate) and input power. When the variations of biogas flow ratio, vapor flow ratio and input power were 0.32~0.37, 0.36~0.42, and 8 kW, respectively, the methance conversion reached its optimal operating condition, or 81.3~89.6%. Under the condition mentioned above, the wet basis concentrations of the synthetic gas were H2 27.11~40.23%, CO 14.31~18.61%. The hydrogen yield and the conversion rate of energy were 40.6~61%, 30.5~54.4%, respectively, the ratio of hydrogen to carbon monoxide($H_2/CO$) was 1.89~2.16.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.157-165
• /
• 1999

Production and measurement of a super-polished few-ppm-scattering mirror substrate are investigated. In order to improve the surface roughness directly determining scattering, the super-polishing process using Bowl-Feed technique is tried. The surface quality of the super-polished substrate is estimated by the phase-measuring interferometer. For the reliable roughness measurement using the interferometer, data averaging method is applied so that the optimal data averaging condition, 30 phase-data averaging and 20 intensity-data averaging, minimizing the measurement error is experimently searched. Based on the optimal data averaging condition, surface roughness of home-made mirror substrate is measured to be less than $0.5{\AA}$ rms corresponding to 2-ppm total-integrated-scattering.

• Applied Biological Chemistry
• /
• v.46 no.2
• /
• pp.107-112
• /
• 2003

The Chunma requires a simple pre-treatment, due to the inconveniences of preservation, toxicities, and pungencies in intact state. Various steaming conditions were examined to establish the anti-oxidative characteristics of Chunma using the Response Surface Methodology (RSM). Total phenolics and electron-donating ability were optimal at 94.43 and $101.67^{\circ}C$ for 42.38 and 41.09 min, respectively. Anti-oxidative (Al) and nitrite-scavenging ability were optimal at $100^{\circ}C$ for 40 min. Optimal steaming conditions were determined as 96{\sim}107{\circ}C$ for $28{\sim}46min$ min, almost identical to the predicted conditions of $100^{\circ}C$, 40 min determined using the superimposed contour map. Anti-oxidative activities (AI) under the optimal conditions were $95.9%{\sim}115.6%$ of those determined under predicted conditions, an indication of the high reliability of the calculated values.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.10
• /
• pp.1412-1422
• /
• 2012

The aim of this work was to establish the optimal conditions for production of carboxymethylcellulase (CMCase) by a newly isolated marine bacterium using response surface methodology (RSM). A microorganism producing CMCase, isolated from seawater, was identified as Cellulophaga lytica based 16S rDNA sequencing and the neighborjoining method. The optimal conditions of rice bran, ammonium chloride, and initial pH of the medium for cell growth were 100.0 g/l, 5.00 g/l, and 7.0, respectively, whereas those for production of CMCase were 79.9 g/l, 8.52 g/l, and 6.1. The optimal concentrations of $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$, and $(NH_4)_2SO_4$ for cell growth were 6.25, 0.62, 0.28, and 0.42 g/l, respectively, whereas those for production of CMCase were 3.72, 0.54, 0.70, and 0.34 g/l. The optimal temperature for cell growth and the CMCase production by C. lytica LBH-14 were $35^{\circ}C$ and $25^{\circ}C$, respectively. The maximal production of CMCase under optimized condition for 3 days was 110.8 U/ml, which was 5.3 times higher than that before optimization. In this study, rice bran and ammonium chloride were developed as carbon and nitrogen sources for the production of CMCase by C. lytica LBH-14. The time for production of CMCase by a newly isolated marine bacterium with submerged fermentations reduced to 3 days, which resulted in enhanced productivity of CMCase and a decrease in its production cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5704-5708
• /
• 2012

In this paper, the algorithm to determine the optimal condition of traverse grinding is proposed by using differential evolution algorithm(DEA). The cost function to determine the optimal grinding condition is designed with considering process cost, production rate, surface roughness. Also, the constraint conditions for grinding such as thermal damage effect, machine tool stiffness, wear parameter of grinding wheel, surface roughness are considered. The algorithm is implemented with LabView software which is widely used at the industrial field. The performance of proposed algorithm is verified by comparing with the result of genetic algorithm(GA) through computer simulation.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.561-565
• /
• 2005

In this study, we attempted to assess the effects of lactate and com steep liquor (CSL) on the production of bacterial cellulose (BC) by Gluconacetobacter persimmonis $KJ145^T$. The optimal condition for the production of BC was a lactate concentration of 1% (w/v) and a CSL concentration of 10% (w/v). Under these optimal conditions, 6 days of fermentation produced 6.90 g/L of BC. Both the BC production yield and cell growth increased continuously until the 20th day of fermentation, by which time 17.0 g/L had been produced. In a static culture trial, in which plastic containers were used as fermentation chambers for 6 days of fermentation, the BC production yield in the group initially cultured with 500 mL medium was higher than that of the 750 and 1000 mL media. In addition, the texture of the BC was examined according to its post-treatment in order to determine conditions for optimal textural characteristics. The strength, hardness, and other characteristics of the BC were negatively correlated with sucrose concentration, but were largely positively correlated with NaCl concentration. With regards to the effect of pH on textural change, BC strength and hardness were elevated at pH 2 and 8 but reduced at pH 4 and 6, indicating that the texture of the BC is extremely sensitive to treatment conditions.

• Journal of Mushroom
• /
• v.22 no.3
• /
• pp.73-80
• /
• 2024

We studied the effects of initial pH, different nitrogen sources, and cultivation methods (shake flask and static culture) on biomass production, exopolysaccharides (EPS), and adenosine by Paecilomyces tenuipes. Relatively low pH levels were optimal for mycelial growth and EPS production. Yeast extract was the most effective organic nitrogen source for EPS production, whereas soybean extract was the best for adenosine production. A high C/N ratio was beneficial for adenosine production; however, excessively high C/N ratios reduced adenosine production. Static fermentation significantly increased adenosine production. A Box-Behnken design was used to optimize adenosine production; the optimal conditions for adenosine production by P. tenuipes were pH 7.0, soybean concentration of 3%, and a static culture period of 20 days, with the maximum adenosine production of 141.10 mg/L (predicted value: 128.05 mg/L).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.74-80
• /
• 1999

Growth and bacteriocin production by Lactobacillus sp. GM7311 in tofu residue treated with two commercial amylases were investigated. The optimal condition of amylase Ⅰ(liquefied enzyme for sauce) and Ⅱ(multienzyme 2,000) for the enzyme reaction was showed at pH 6.0 and 4.0, respectively. The optimal temperature was 40oC both. At the enzyme dosage 4% and 3% and reaction time 1hr, about 2% of reduced sugar needed bacteriocin production was obtained. The enzymatic treatment of tofu residue enhanced bacteriocin production by lactic acid bacteria, particularly in the tofu residues added 2.0% yeast extract. But, we couldn't see the increment of bacteriocin activity in the tofu residues added other nitrogen sources such as proteose peptone No. 3 and lab lemco powder. Also, in the comparision of amylase I and Ⅱ, bacteriocin activity in the tofu residue treated with amylase Ⅰ was better than that of amylase Ⅱ.

• Korean Journal of Microbiology
• /
• v.40 no.3
• /
• pp.217-220
• /
• 2004

The effect of media composition and culture condition on mycelial growth and cordycepin (3'-deoxyadenosine) production was determined using Cordyceps spp. Among the strains of C. militaris and C. sinensis tested, C. militaris KCTC 6862, C. militaris DGUM 32003 and C. militaris KCTC 16932 were excellent for the production of cordycepin. The optimal temperature and pH for production of cordycepin were $24^{\circ}C$ and pH ranged from 6.0 to 10, respectively. Among various sources of carbon and nitrogen tested, glucose and tryptone were very excellent for the production of cordycepin, respectively. After 5days cultivation with 1% of tryptone with nitrogen source, 39mg/l of cordycepin was produced. However, addition of phosphorus sources reduced the production of cordycepin.