• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.952-965
• /
• 1993

A simulation modeling is necessary for the optimal design of a rice processing plant, which consists of a facility (a silo system) of rice drying and storage and a rice mill plant. In a rice processing plant, the production scheduling and the decision on capcity of each unit based on a queuing theory is very important and difficult. In this study a process-oriented simulation model was developed for the design of a rice drying and storage system with SLAMSYSTEM. The simulation model is capable of simulating virtually all the processing activities and provides work schedules which minimize total processing time , mean flow time and bottleneck of the plant system and estimate drying time for a batch in a drying silo. Model results were used for determination the size and capacity of each processing unit and for analyzing the performance of the plant . The developed model was actually applied to construct a grain silo system for rice drying and storage.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.377-382
• /
• 2008

For stator winding protection of AC generator, KCL(Kirchhoff's Current Law) is widely applied. Actually a CRDR(Current Ratio Differential Relay) based on DFT(Discrete Fourier Transform) has been used for protecting generator. It has been pointed out that defects can occur during the process of transforming a time domain signal into a frequency domain one which can lead to loss of time domain information. Wavelets techniques are proposed for the analysis of power system transients. This paper introduces an algorithm to choose a suitable Mother Wave1et for generator stator fault detection. For optimal selection, we analyzed db(Daubechies), sym(Symlets), and coif(Coiflects) of Mother Wavelet. And we compared with performance of the choice algorithm using detail coefficients energy and RMS(root mean square) error. It can be improved the reliability of the conventional DFT based CRDR. The feasibility and effectiveness of the proposed scheme is proved with simulation using collected data obtained from ATP (Alternative Transient Program) package.

• The Korean Journal of Applied Statistics
• /
• v.30 no.5
• /
• pp.733-745
• /
• 2017

Local composite quantile regression is a useful non-parametric regression method widely used for its high efficiency. Data smoothing methods using kernel are typically used in the estimation process with performances that rely largely on the smoothing parameter rather than the kernel. However, $L_2$-norm is generally used as criterion to estimate the performance of the regression function. In addition, many studies have been conducted on the selection of smoothing parameters that minimize mean square error (MSE) or mean integrated square error (MISE). In this paper, we explored the optimality of selecting smoothing parameters that determine the performance of non-parametric regression models using local linear composite quantile regression. As evaluation criteria for the choice of smoothing parameter, we used mean absolute error (MAE) and mean integrated absolute error (MIAE), which have not been researched extensively due to mathematical difficulties. We proved the uniqueness of the optimal smoothing parameter based on MAE and MIAE. Furthermore, we compared the optimal smoothing parameter based on the proposed criteria (MAE and MIAE) with existing criteria (MSE and MISE). In this process, the properties of the proposed method were investigated through simulation studies in various situations.

• Design & Manufacturing
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2017

In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.579-603
• /
• 2018

In this paper we propose a QoS-enhanced intelligent stochastic optimal fair real-time packet scheduler, QUEST, for 4G LTE traffic in routers. The objective of this research is to maximize the system QoS subject to the constraint that the processor utilization is kept nearly at 100 percent. The QUEST has following unique advantages. First, it solves the challenging problem of starvation for low priority process - buffered streaming video and TCP based; second, it solves the major bottleneck of the scheduler Earliest Deadline First's failure at heavy loads. Finally, QUEST offers the benefit of arbitrarily pre-programming the process utilization ratio.Three classes of multimedia 4G LTE QCI traffic, conversational voice, live streaming video, buffered streaming video and TCP based applications have been considered. We analyse two most important QoS metrics, packet loss rate (PLR) and mean waiting time. All claims are supported by discrete event and Monte Carlo simulations. The simulation results show that the QUEST scheduler outperforms current state-of-the-art benchmark schedulers. The proposed scheduler offers 37 percent improvement in PLR and 23 percent improvement in mean waiting time over the best competing current scheduler Accuracy-aware EDF.

• The Korean Journal of Pain
• /
• v.33 no.1
• /
• pp.60-65
• /
• 2020

Background: Anatomic changes in the acromion have been considered a main cause of shoulder impingement syndrome (SIS). To evaluate the relationship between SIS and the acromion process, we devised a new morphological parameter called the acromion process cross-sectional area (APA). We hypothesized that the APA could be an important morphologic diagnostic parameter in SIS. Methods: We collected APA data from 95 patients with SIS and 126 control subjects who underwent shoulder magnetic resonance imaging (MRI). Then we measured the maximal cross-sectional area of the bone margin of the acromion process on MRI scans. Results: The mean of APAs were 136.50 ± 21.75 ㎟ in the male control group and 202.91 ± 31.78 ㎟ in the male SIS group; SIS patients had significantly greater APAs (P < 0.001). The average of APAs were 105.38 ± 19.07 ㎟ in the female control group and 147.62 ± 22.90 ㎟ in the female SIS group, and the SIS patients had significantly greater APAs (P < 0.001). The optimal APA cut-off in the male group was 165.14 ㎟ with 90.2% sensitivity, 91.4% specificity, and an area under the curve (AUC) of 0.968. In the female group, the optimal cut-off was 122.50 ㎟ with 85.2% sensitivity, 84.9% specificity, and an AUC of 0.928. Conclusions: The newly devised APA is a sensitive parameter for assessing SIS; greater APA is associated with a higher possibility of SIS. We think that this result will be helpful for the diagnosis of SIS.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.6
• /
• pp.985-997
• /
• 2016

The objectives of this study, which filled gaps in previous studies, were: (1) to find the optimal mixing condition of nanoemulsions containing oleoresin capsicum (OC), Tween 80, propylene glycol (PG), and sucrose monostearate (SES) by microfluidization; (2) to investigate their properties and stability depending on such factors as pH, temperature, and heating time; (3) to measure the effect of adding ascorbic acid. In order to test these objectives, the following three experiments were conducted: Firstly, in order to find the optimal mixing ratio, nanoemulsions containing OC - the mean diameter of which is smaller than 100 nm - were prepared through the process of microfluidization; and their mean particle size, zeta potential, and capsaicinoids were measured. The test results indicated that the mixing ratio at OC : Tween 80 : PG + water(1:2) = 1 : 0.2 : 5 was optimal. Secondly, the properties and stability of nanoemulsions were investigated with varying parameters. The test results illustrated that single-layer nanoemulsions and double-layer nanoemulsions coated with alginate were stable, irrespective of all the parameters other than/except for pH 3. Thirdly, the properties of nanoemulsions were then analyzed according to the addition of ascorbic acid. The results demonstrated that the properties of single-layer nanoemulsions were not affected by addition of ascorbic acid. In case of alginate double-layer nanoemulsions, the particle size was reduced, and zeta potential increased with the addition of ascorbic acid. In conclusion, the demonstrated stability of various nanoemulsions under the different conditions in the present study suggests that these findings may constitute a basis in manufacturing various food-grade products which use nanoemulsions-and indicate that food nanoemulsions, if adopted in the food industry, have the potential to satisfy both the functionality and acceptability requirements necessary to produce commercially marketable food-grade products.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.279-289
• /
• 2010

In this study, we propose a simple statistical model for determining the admission or discharge of 668 patients with a chief complaint of dyspnea. For this, we use 11 explanatory variables which are chosen to be important by clinical experts among 55 variables. As a modification process, we determine the discharge interval of each variable by the kernel density functions of the admitted and discharged patients. We then choose the optimal model for determining the discharge of patients based on the number of explanatory variables belonging to the corresponding discharge intervals. Since the numbers of the admitted and discharged patients are not balanced, we use, as the criteria for selecting the optimal model, the arithmetic mean of sensitivity and specificity and the harmonic mean of sensitivity and precision. The selected optimal model predicts the discharge if 7 or more explanatory variables belong to the corresponding discharge intervals.

• Microbiology and Biotechnology Letters
• /
• v.2 no.1
• /
• pp.29-35
• /
• 1974

We have studied the applicability of the principles and inherent advantages of the two-stage dontinuous uclture technique to an enzyme process for the purpose of improving and optimizing the productivity of 3-ketosteroid-delta-1-dehydrogenase. By using a two-stage continuous culture system, the growth st ageand enzyme produdtion stage are separated. In each stage an optimal set of toperaing conditions was determined, and this was tested for feasibility for the period of 10 days. During this period, at least 70％ of the maximum enzyme productivity could be maintained. The important design parameters studied are: (1) optimal specific growth rate in the first stage which corresponds to the maximal cell productivity, (2) the optimal dilution rate in the second stage which in turn determines the size of second stage fermentor and the mean residence time of cells in the second stage, (3) cell concentration in both stages, add (4) the specific enzyme productivity and enzyme productivity of the second stage. In addition, by using two-stage continuous culture system we have been able to reduce or eliminate the effect of catabolite repression due to high medium concentration and the adverse effect of the solvent used to dissolve the inducer. We have found the balance between the opposing effects of induction and repression in the second stage judging from the observation that the enzyme productivity goes through a maximum.

• Smart Structures and Systems
• /
• v.31 no.6
• /
• pp.545-559
• /
• 2023

Nanoparticle strips (NPS) are widely used as external reinforcers for two-way reinforced concrete slabs. However, the Structural Health Monitoring (SHM) of these slabs is a very important issue and was evaluated in this study. This study has been done analytically and numerically to optimize the placement of sensors. The properties of slabs and carbon nanotubes as composite sheets were considered isotopic and orthotropic, respectively. The nonlinear Finite Element Method (FEM) approach and suitable optimal placement of sensor approach were developed as a new MATLAB toolbox called DECOMAC by the authors of this paper. The Suitable multi-objective function was considered in optimized processes based on distributed ECOMAC method. Some common concrete slabs in construction with different aspect ratios were considered as case studies. The dimension and distance of nano strips in retrofitting process were selected according to building codes. The results of Optimal Sensor Placement (OSP) by DECOMAC algorithm on un-retrofitted and retrofitted slabs were compared. The statistical analysis according to the Mann-Whitney criteria shows that there is a significant difference between them (mean P-value = 0.61).