• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.399-399
• /
• 2000

In this paper, path generation using the sensor platform is proposed. The sensor platform is composed two electric motors which make panning and tilting motions. An algorithm fur a real path form and an obstacle length is realized using a scanning algorithm to rotating the sensors on the sensor platform. An ARV (Autonomous Robot Vehicle) is able to recognize the given path by adapting this algorithm. In order for the ARV to navigate the path flexibly, a kinematic model needed to be constructed. The kinematic model of the ARV was reformed around its body center through a relative velocity relationship to controllability, which derives from the nonholonomic characteristics. The optimal controller that is based on tile kinematic model is operated purposefully to track a reference vehicle's path. The path generation algorithm is composed of two parks. On e part is the generating path pattern, and the other is used to avoid an obstacle. The optimal controller is used for tracking the reference path which is generated by recognizing the path pattern. Results of simulation show that this algorithm for an ARV is sufficient for path generation by small number of sensors and for low cost controller.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.57-58
• /
• 2006

A Simulation model is developed to minimize the path tracking errors when the non-circular cutting is done by a VCM(voice coil motor) driven tool. The relationship between PWM(Pulse Width Modulation) duty ratio and velocity of voice coil motor is theoretically derived from combining the circuit equation for the coils and the motion equation for the magnetic rod of the voice coil motor. The path tracking errors are showed differently according to the rotational speed, the number of segments and the control period in digital control. Given a required accuracy in the non-circular cutting, the optimal values for those parameters are determined based on the developed simulation model.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.55-61
• /
• 2021

As the demand for distance education increases, it is necessary to present a problem solving path through a learning tracking algorithm in order to support the efficient learning of learners. In this paper, we proposed a problem solving path of various difficulty levels in various subjects by supplementing the existing learning tracking algorithm. Through the data set obtained through the path for solving the learner's problem, the path through the prim's minimum Spanning tree was secured, and the optimal problem solving path through the recursive neural network was suggested through the path data set. As a result of the performance evaluation of the contents proposed in this paper, it was confirmed that more than 52% of the test subjects included the problem solving path suggested in the problem solving process, and the problem solving time was also improved by more than 45%.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.84-86
• /
• 2001

A new navigation method is developed and implemented for mobile robot. The mobile robot navigation problem has traditionally been decomposed into the path planning and path following. Unlike tracking-based system, which minimize intercept time and moved mobile robot distance for optimal rendezvous point selection. To research of random moving object uses algorithm of Adaptive Control using Auto-regressive Model. A fine motion tracking object's trajectory is predicted of Auto-regressive Algorithm. Thus, the mobile robot can travel faster than the target wi thin the robot's workspace. The can select optimal rendezvous point of various intercept time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.4
• /
• pp.188-194
• /
• 2014

V2I(Vehicular to Infrastructure) is a one kind of communication systems which is used between the base stations and mobile objects. In V2I communication system, it is difficult to obtain the desired communication performance. Beamforming technology is to find the optimal path. and it can be improved the communication performance. MUSIC algorithm can be estimated the direction of arrival. The directional vector of received signals and the eigenvector has orthogonal property. MUSIC algorithm uses this property. In V2I communication environment, real time optimal path is changed. By the high computational complexity of the MUSIC algorithm, the optimal path estimation error is generated. In this paper, we propose a method of computation reduction algorithm for MUSIC algorithm.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.22-29
• /
• 2019

This study presented a model predictive tracking control algorithm of autonomous truck based on object state estimation using extended Kalman filter. To design the model, the 1-layer laser scanner was used to estimate position and velocity of the object using extended Kalman filter. Based on these estimations, the desired linear path for object tracking was computed. The lateral and yaw angle errors were computed using the computed linear path and relative positions of the truck. The computed errors were used in the model predictive control algorithm to compute the optimal steering angle for object tracking. The performance evaluation was conducted on Matlab/Simulink environments using planar truck model and actual point data obtained from laser scanner. The evaluation results showed that the tracking control algorithm developed in this study can track the object reasonably based on the model predictive control algorithm based on the estimated states.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.599-604
• /
• 2013

Path planning of mobile robots has a purpose to design an optimal path from an initial position to a target point. Minimum driving time, minimum driving distance and minimum driving error might be considered in choosing the optimal path and are correlated to each other. In this paper, an efficient driving trajectory is planned in a real situation where a mobile robot follows a moving object. Position and distance of the moving object are obtained using a web camera, and the rotation angular and linear velocities are estimated using Kalman filters to predict the trajectory of the moving object. Finally, the mobile robot follows the moving object using a single curvature trajectory by estimating the trajectory of the moving object. Using the estimation by Kalman filters and the single curvature in the trajectory planning, the total tracking distance and time saved amounts to about 7%. The effectiveness of the proposed algorithm has been verified through real tracking experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.73-82
• /
• 2004

In this paper, implementation of obstacle avoidance of a nonholonomic mobile robot in unstructured environment is introduced. To avoid obstacles, first, a reference collision-free path for the MR is generated off-line using HJB-based optimal path planning method. A controller is designed using integrator backstepping method for tracking the generated reference path. To implement the designed controller, a control system are needed and composed of camera system and PIC-based controller. The workspace is observed by a ceiling-mounted USB camera as part of an un-calibrated camera system. Thus the positional information of the MR is updated frequently and the MR can get the useful inputs for its tracking controller. The whole control system is realized by integrating a computer with PIC-based microprocessor using wireless communication: the image processing control module and path planning module serve as high level computer control while the device control serves as low level PIC microprocessor control. The simulation and experimental results show the effectiveness of the designed control system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.342-348
• /
• 1998

A majority of industrial robots are controlled by a simple joint servo control of joint actuators. In this type of control, the performance of control is greatly influenced by the joint interaction torques including Coriolis and centrifugal forces, which act as disturbance torques to the control system. As the speed of the robot increases, the effect of this disturbance torque increases, and hence makes the high speed - high precision control more difficult to achieve. In this paper, the joint disturbance torque of robots is analyzed. The joint disturbance torque is defined using the coefficients of dynamic equation of motion, and for the case of a 2 DOF planar robot, the conditions for the minimum and maximum joint disturbance torques are identified, and the effect of link parameters and joint variables on the joint disturbance torque are examined. Then, a solution to the optimal path placement problem is propose that minimizes the joint disturbance torque during a straight line motion. The proposed method is illustrated using computer simulation. The proposed solution method can be applied to a class of robots that are controlled by independent joint servo control, which includes the vast majority of industrial robots.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.150-158
• /
• 2009

For the autonomous movement, the optimal path planning connecting between current and target positions is essential, and the optimal path of mobile robot means obstacle-free and the shortest length path to a target position. Many actual mobile robots should move without any information of surrounded obstacles. Thus, this paper suggests new methods of path planning and obstacle avoidment, suitable in unknown environments. This method of path planning always tracks the local target expected as the optimal one, and the result of continuous tracking becomes the first generated moving path. This path, however, do not regard the collision with obstacles. Thus, this paper suggests a new method of obstacle avoidance resembled with the Potential Field method. Finally, a simulation confirms the performance and correctness of the path planning and obstacle avoidance, suggested in this paper.