• 전기학회논문지
• /
• 제67권7호
• /
• pp.809-815
• /
• 2018

Distributed generations (DGs) using renewable energy resources in power systems have been widely integrated, and many of these DGs have intermittency. DGs can significantly affect the overall voltage profile of the system through the reactive power control for a voltage support. Therefore, in the planning stage of the optimal operation and dispatch of voltage regulation devices, DGs' hosting capacity with the reactive power control scheme should be considered. In this paper, we model the IEEE 34-bus test feeder, including all essential equipment. An optimization method is utilized to determine the optimal siting and operation of the voltage regulation devices in the presence of DGs with reactive power control scheme. Finally, we compare the optimal results of the each case to analyze the relationship among the hosting capacity of the DGs and voltage regulation devices operation.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2011년도 제43차 동계학술발표논문집 19권1호
• /
• pp.107-108
• /
• 2011

철도기술의 발전 이후 현재 도시철도에서는 국내 처음으로 열차의 안전한 운행 제어를 위한 자동/무인 운전이 가능한 자동 열차 운행 장치(ATO)를 도입해 안정적으로 정시 운행을 하고 있다. ATO 자동운전은 제어기준 값(목표속도)과 피드백 값(실제속도)간의 오차에 의한 전동차의 역행과 제동을 반복함으로 에너지 효율 낮다. 본 논문에서는 고정된 역간 거리를 정해진 운전 시분 내에 주행에너지를 최소화하며 주행하는 열차의 특성을 파악하고 모델링한다. 따라서 5호선 실 노선 구간별 운전시분 내에서 실측 데이터 분석을 위해 직선구간/구배구간/곡선구간 등 구간을 선정하고 그 구간에서 열차의 주행패턴에 따라 변화하는 주행에너지를 최소화하는 최적의 주행 패턴을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.98-101
• /
• 1988

A non load level decomposition algorithm is presented for power system reactive source planning. The fuel cost is introduced to performance index in optimal operation problem. The investment variables are all reactive sources such as capacitance or inductance. Experiment showed a desirable result and the computation time reduced considerably.

• 대한산업공학회지
• /
• 제28권1호
• /
• pp.14-24
• /
• 2002

We focus on resource allocation planning in container terminal operation planning problems and present network design model and genetic algorithm. We present a network design model in which arc capacities must be properly dimensioned to sustain the container traffic. This model supports various planning aspects of container terminal and brings in a very general form. The integer programming model of network design can be extended to accommodate vertical or horizontal yard configuration by adding constraints such as restricting the sum of yard cranes allocated to a block of yards. We devise a genetic algorithm for the network design model in which genes have the form of general integers instead of binary integers. In computational experiments, it is found that the genetic algorithm can produce very good solution compared to the optimal solution obtained by CPLEX in terms of computation time and solution quality. This algorithm can be used to generate many alternatives of a resource allocation plan for the container terminal and to evaluate the alternatives using various tools such as simulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1651-1654
• /
• 2003

The process equipment for handling high level radioactive materials, such as spent nuclear fuel, is operated within a sealed facility, called a hot cell, due to high radioactivity. Thus, this equipment should be maintained and repaired by remotely operated manipulator. In this study, to carry out the sale and effective maintenance of the process equipment installed in the hot cell by a servo type manipulator, a collision free motion planning method of the manipulator using virtual prototyping technology is suggested. To do this, the parts are modelled in 3-D graphics, assembled, and kinematics are assigned and the virtual workcell is implemented in the graphical environment which is the same as the real environment. The method proposed in this paper is to find the optimal path of the manipulator using the function of the collision detection in the graphic simulator. The proposed path planning method and this graphic simulator of manipulator can be effectively used in designing of the maintenance processes for the hot cell equipment and enhancing the reliability of the spent fuel management.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.315-322
• /
• 2009

Penetration and installation of a new dynamic technology known as Flexible AC Transmission Systems (FACTS) in a practical and dynamic network requires and force expert engineer to develop robust and flexible strategy for planning and control. Unified Power Flow Controller (UPFC) is one of the recent and effective FACTS devices designed for multi control operation to enhance the power system security. This paper presents a dynamic strategy based on Particle Swarm Optimization (PSO) for optimal parameters setting of UPFC to enhance the system loadability. Firstly, we perform a multi power flow analysis with load incrementation to construct a global database to determine the initial efficient bounds associated to active power and reactive power target vector. Secondly a PSO technique applied to search the new parameters setting of the UPFC within the initial new active power and reactive power target bounds. The proposed approach is implemented with Matlab program and verified with IEEE 30-Bus test network. The results show that the proposed approach can converge to the near optimum solution with accuracy, and confirm that flexible multi-control of this device coordinated with efficient location enhance the system security of power system by eliminating the overloaded lines and the bus voltage violation.

• 전자공학회논문지SC
• /
• 제43권3호
• /
• pp.31-40
• /
• 2006

이동로봇의 경로 설정과 장애물 회피에 관한 문제는 이동로봇을 제어하기 위한 기본적인 문제로서 지금까지 많은 연구가 진행되어 오고 있다. 다양한 센서들로부터 얻어진 정보는 로봇이 진행하기 위한 경로에 대한 결정과 장애물에 대한 정보를 제공해준다. 제한 조건이 존재하는 경우에서 그 상황에 알맞은 방법들이 대부분이며, 다른 상황을 해결하기에는 어려움이 있다. 또한, 최적화된 경로에 대한 좋은 결과를 만들기 위해서는 복잡한 계산 과정을 통해서 시간 지연이 발생하게 된다. 이와 같은 처리 방법은 움직이는 장애물의 회피와 같이 빠른 처리를 필요로 하는 상황에서 단점으로 작용한다. 본 논문에서는 장애물과 이동 가능한 경로들의 영역을 작은 영역들이 분포하는 공간으로 변형하고 이와 같이 구성된 공간에서 밀도와 연결 상태를 통해 이동 로봇이 진행 할 수 있는 최단 경로를 결정한다. 제안된 방법을 통해 작은 영역들은 자신의 번호를 가지게 되며, 주변 영역들의 개수를 통해 이동 경로를 결정하게 된다.

• 한국ITS학회 논문지
• /
• 제16권6호
• /
• pp.112-123
• /
• 2017

정부의 대중교통활성화 정책과 이용자들의 승용차에서 버스나 지하철로의 수단 전환으로, 대중교통의 정확한 배차시간과 도착시간의 확보가 중요해졌다. 서울시에서 제공하는 버스운행관리시스템(BMS : Bus Management System) 자료를 이용하여, 실시간 버스위치, 배차간격, 운행이력 등의 정보를 알 수 있다. 본 연구에서는 BMS 자료를 이용하여 안전운행을 하면서 정시성도 확보할 수 있는 방안을 제안하고자 한다. 다른 연구와는 다르게, 버스 정류장 사이 구간을 5개의 지점과 6개의 시간으로 나누어, 각각의 시간을 BMS 자료를 이용하여 산정하였다. 또한, 각 시간에 영향을 주는 주된 원인을 살펴보고, 요소별 평균, 표준편차, 변동계수를 이용하여 정류장 별 정시성과 안전성, 이동성을 모두 확보한 버스 노선의 적정 운행시간을 제안하였다.

• Management Science and Financial Engineering
• /
• 제12권1호
• /
• pp.95-112
• /
• 2006

Disassembly scheduling is the problem of determining the quantity and timing of disassembling used or end-of-life products while satisfying the demand of their parts and/or components over a planning horizon. The case of assembly product structure is considered while the resource capacity constraints are explicitly considered. A cost-based objective is considered that minimizes the sum of disassembly operation and inventory holding costs. The problem is formulated as an integer programming model, and a two-stage heuristic with construction and improvement algorithms is suggested in this paper. To test the performance of the heuristic, computational experiments are done on randomly generated problems, and the results show that the heuristic gives near optimal solutions within a very short amount of computation time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.415-431
• /
• 2010

Station-area development need transportation system and efficiency of public transit operation. but it had a great difficulty in developing by lack of profitability station-area because the excessive public contributions, and increase of land usage, a lot of tallege. Recently station-area development accelerated by the new law has been overridden and more efficient transport system configuration stations, possible of urban regeneration. The purpose of this study is to successful promotion of the urban Planning by Unit-Station-area development, the optimal method of financing, changeable of zoning to the development of high density.