• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.29-37
• /
• 2018

In this study, optimum extraction conditions for phosphorus recovery from sewage sludge ash(SSA) were investigated. For this purpose, an experiment was conducted to determine optimal recovery conditions for Ca-P type phosphorus by using calcium component in the recycled aggregate residue. The phosphorus content of sewage sludge ash was confirmed to be 5.0 %. When $H_2SO_4$ was used as an extract, concentration of 1 N $H_2SO_4$, L/S ratio of 10, and extraction time of 30 min were found to be the optimal extraction conditions. Phosphorus was extracted by using optimal extraction conditions, and then the heavy metals eluted with phosphorus were removed using 1~20 g of cation exchange resin. In 20 g of cation exchange resin, Fe 71.3%, Cu 82.4%, Zn 79.9%, and Cr 15% were removed. After that, the mixing ratio of the calcium extract obtained from the recycled aggregate residue (RAR) was changed to 1:1, 1:5, 1:10. The pH of the SSA to RAR mixture was adjusted to 2, 4, 8 and 12 by the addition of 5 N NaOH to the mixture of 1:5, and the phosphorus was recovered as Ca-P type precipitate. The optimum pH was 8. When recycled aggregate residues were used, the weight of calcium phosphate increased, but the amount of wastewater generated also increased. Therefore, it was concluded that the use of recycled aggregate residue was not economically feasible.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.611-619
• /
• 2018

Basalt powder sludge (abbreviated BPS) is an inevitable industry by product resulted from the stone processing. Recently, demands for natural materials have been increasing in the construction and landscaping fields, therefore, amounts of BPS have been also increasing. Since most of BPS are used as landfill and earth soil, it is necessary to figure out to expedite their utilization. In this study, by considering the characteristics of precipitation of Jeju, effectiveness of BPS as a filler for asphalt compounds mixed with cement were analyzed. As a result, BPS satisfies quality criterion required in KS F 3501. Marshall mixing designs were performed to determine the optimal asphalt content for the Modified recycling asphalt mixture (27% recycling aggregate) and the Normal asphalt mixture. Effectiveness of BPS were identified by the Marshall Stability Test with the mixing ratio (level 3) of two asphalt compounds and composition ration (level 3) of BPS and cement. Performance of asphalt compounds shown appropriate effect of mixing and composition ratios of the filler were assessed. Test results show that two types of asphalt compounds satisfy the quality standards of the MLIT (2015). Therefore, BPS could be used as filler for asphalt compounds.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.497-505
• /
• 2017

TDF (Tire derived fuel) Fly ash is an industrial by-product when scraped tire was used a fuel source at the power plant. TDF Fly ash has been classified as domestic waste at the workplace so far and has not been appropriately utilized. We conducted a fundamental physical property test of asphalt mixture to investigate the possibility of using TDF Fly ash as a mineral filler of asphalt mixture for exploring new usage strategies. TDF Fly ash meets KS F 3501 asphalt mixture mineral filler criteria. And the optimal asphalt binder amount was determined to be 4.5% by Marshall design. Mineral filler content was determined at 3% and analyzed by comparing using mineral filler as stone powder. The basic physical property test of the asphalt mixture was evaluated to the provision indicated in "Production and Construction Guidelines for Asphalt Mixture" published by the Ministry of Land, Infrastructure and Transport. In the test, Marshall stability test, dynamic immersion test, tensile strength ratio test, wheel tracking test were carried out. As a result of the experiment, Marshall stability and dynamic stability satisfied the standards, and confirmed the stability and Dynamic immersion and tensile strength ratio test that TDF Fly ash is more effective for scaling and moisture resistance than stone dust. Therefore, in this research, it is expected that multilateral utilization of TDF Fly ash, and a positive effect can be also expected.

• Korean journal of food and cookery science
• /
• v.22 no.2 s.92
• /
• pp.193-203
• /
• 2006

The quality characteristics of cookies containing black rice flour, which has a greater variety of functional components than wheat flour, were studied. The results of the pasting properties shows that the inclusion of black rice flour to the wheat flour-mixture did not affect the pasting temperature but increased the enthalpy, indicating that more energy is needed for the starch gelatinization. The total dietary fiber and total polyphenol content increased and the cookies color became darker and deeper with increasing black rice flour content. According to the results from TA on texture, the hardness decreased and the crispness increased significantly (both, p<0.001) with increasing black rice flour content. From the acceptance test, the appearance, aroma and texture of the cookies with added black rice flour were significantly (p<0.001) lower than those of the wheat flour cookies. However, the taste and overall acceptance of the cookies with added black rice (lour did not differ significantly from those of the wheat flour cookies. According to the results from the sensory evaluation, the aroma, black rice flavor, crispness, graininess and color(gray-violet) of the cookies increased significantly(p<0.001) with increasing black rice flour content and those of the cookies with 30% black rice flour had the highest values among the cookies which weren't significantly different from those of the cookies with 20% black rice flour. From the above results, the optimal ratio for the addition of black rice flour to the cookies was 10% from the viewpoint of the sensory evaluation and functional components.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.8
• /
• pp.1270-1277
• /
• 2003

The extrusion conditions of the soymilk residue and corn grits mixtures were optimized. The experiment was designed according to the D-optimal design of response surface methodology (RSM), which shows 18 experimental points including 4 replicates for three independent variables (screw speed, water content and die temperature). The responses variables such as bending force, expansion ratio, bulk density, water solubility index (WSI), water absorption index (WAI), and color values (L＊, a＊, b＊) were evaluated using response surface analysis. Expansion ratio and WSI decreased with increasing water content, whereas bulk density tended to increase with increasing water content. While greater screw speeds enhanced WSI and yellowness, higher moisture contents decreased the expansion ratio and WSI value. However, die temperature did not influence upon the response variables. The optimum extrusion conditions by numerical and graphical methods were similar: the screw speed, water content, and die temperature were 250 rpm, 22.43% and l28.16$^{\circ}C$ by the numerical method; 250 rpm, 22.43%, and 128.02$^{\circ}C$ by graphical method.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.86-92
• /
• 2000

This study was conducted to determine the optimal mixing ratio of the paper mill sludge(PMS) and pig manure(PM). Since the former contains lots of total carbon and low nitrogen, it was used as carbon source. Also, dried paper mill sludge(DPMS) was added to the mixture to control the water content. The treatments was composed of four as follows, PMS-100(PM 0%+PMS 80%+DPMS 20%), PMS-85(15+65+20), PMS-70(30+50+20), and PMS-55(45+35+20). The mixtures were composted under aerobic condition in $1.25m^3$ static piles. The piles were aerated for 15 minutes per day and turned over the mixture once a week at the early stage of composting. To estimate the maturity of composts, the changes of physico-chemical properties such as temperature, pH, C/N ratio and color were monitored every week. The 25-30 and 55-60% as optimal condition of C/N ratio and moisture content were respectively recommended for effective composting by the evaluation of the changes of phsico-chemical properties for materials taken from compost files during the composting period. When the 30 and 45% of PM were mixed with PMS, the maturity time at least demanded to the stable state were shortened and the qualify of the final product was improved in a view of nutritional components.

• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.999-1011
• /
• 2023

This study investigated the anti-inflammatory, trypsin activity, and antioxidant effects of 11 kinds of plant extracts to discover materials for developing optimal mixtures that improve inflammation and help digestion. Ziziphus jujuba Mill. (ZJ), Leonurus japonicus Houtt. (LJ), Scutellaria baicalensis (SB), Platycodon grandiflorum, and Aster scaber extracts had excellent anti-inflammatory effects by reducing excessive nitric oxide (NO) and tumor necrosis factor-α content in lipopolysaccharide (LPS)-stimulated RAW264.7 macrophages. The malt (MA), Pyrus pyrifolia Nakai (PP), Raphanus sativus L., Platycodon grandiflorum extracts among the 11 kinds of plant extracts had high trypsin activity. The antioxidant activity of the plant extracts was examined by the DPPH radical scavenging activity, and the SB, PE, JU, and MA extracts had high antioxidant activity. Therefore, PP, MA, ZJ, LJ, and SB were selected to develop optimal mixtures that improve inflammation and help digestion. The extract of plant mixture containing PP, MA, ZJ, LJ, and SB in the ratio 1:1:2:1:2 (w/w) significantly inhibited NO production than the extract of PP, MA, ZJ, LJ, and SB, respectively, in LPS-stimulated RAW 264.7 macrophages. The DPPH radical scavenging activity of the mixture extract was significantly higher than the extract of PP, MA, ZJ, and LJ, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.71-79
• /
• 2007

The effects of synthetic bulking agent (SBA) on the composting reaction were investigated with a lab-scale composting reactor. The positive effects of SBA addition were observed in composting reactions where relatively tough composting conditions like high water content and no addition of seed compost were provided. Such effects were assumed to be caused by the enhanced free air space in compost mixture. It was additional benefits of using SBA, a bulking agent, that the amount of saw dust, another bulking agent, could be reduced to 50% compared to composting without SBA. Although SBA would be used as a bulking agent, two options are thought to be very important to ensure composting reaction well. One is that optimal water content should be maintained around 60%. The other is that saw dust is inevitable bulking agent to prevent food waste from lumping, so combination use of two ones are necessary.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.1
• /
• pp.40-46
• /
• 2007

A qualitative investigation Dongchunghacho, Jelly combined with sericultural products prepared from assorted increments(0.5, 1, 1.5 and 2%) of P. japonica powder was performed. The qualitative parameters used to assess P. japonica powder increments included, hysicochemical, textural and sensory properties. The moisture and crude protein content of the Dongchunghacho Jelly were significantly greater than the control(p<0.05). Conversely, Dongchunghacho Jelly showed a propensity towards lower crude fat content than the control group. A positive trend was observed for both mineral content and dark color with increased P. japonica powder. In contrast, texture, hardness, gumminess and chewiness of the Dongchunghacho Jelly decreased with increasing levels of P. japonica powder. Color, taste, texture and overall preference of Dongchunghacho Jelly were optimal in the 1 % P. japonica powder mixture.

• Advances in concrete construction
• /
• v.16 no.3
• /
• pp.127-139
• /
• 2023

In this study, the steel fiber and the polypropylene fiber were used to enhance the mechanical properties of fully recycled coarse aggregate concrete. Natural crushed stone was replaced with recycled coarse aggregate at 100% by volume. The steel fiber and polypropylene fiber were used as additive material by incorporating into the mixture. In this test two parameters were considered: (a) steel fiber volume ratio (i.e., 0%, 1%, 1.5%, 2%), (b) polypropylene fiber volume ratio (i.e., 0%, 0.1%, 0.15%, 0.2%). The results showed that compared with no fiber, the integrity of cubes or cylinders mixed with fibers after failure was better. When the volume ratio of steel fiber was 1~2%, the width of mid-span crack after flexural failure was 5~8 mm. In addition, when the volume ratio of polypropylene fiber was 0.15%, with the increase of steel fiber content, the static elastic modulus and toughness of axial compression first increased and then decreased, and the flexural strength increased, with a range of 6.5%~20.3%. Besides, when the volume ratio of steel fiber was 1.5%, with the increase of polypropylene fiber content, the static elastic modulus decreased, with a range of 7.0%~10.5%. The ratio of axial compression toughness first increased and then decreased, with a range of 2.2%~8.7%. The flexural strength decreased, with a range of 2.7%~12.6%. On the other hand, the calculation formula of static elastic modulus and cube compressive strength of fully recycled coarse aggregate with steel-polypropylene fiber was fitted, and the optimal fiber content within the scope of the test were put forward.