• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.587-600
• /
• 2023

This paper presents an optimal design of the slim type high frequency transformer used in the LLC DC to DC resonant converter for 65-inch UHD-TV with the rated power of 315W. This paper also performs an optimal design of the slim type high frequency through core loss analysis, AC winding loss analysis, and optimization design of the winding arrangement of the LLC resonant transformer. Particularly, the high-efficiency and slim type high frequency transformer based on the obtained results from theoretical analysis in this paper is constructed in the interleaved and vertical winding structures of its transformer to realize the winding method of automatic type and minimize AC winding loss. The primary and secondary windings of the slim type high frequency transformer the vertical winding structure proposed in this paper used the Litz-wire windings, PCB and copper plate windings, respectively. Finally, an optimal design of the slim type high frequency transformer proposed in this paper was carried out through the experimental results to confirm the validity of theoretical analysis based on the simulation results using Maxwell 2D and 3D tool.

• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.751-757
• /
• 2003

With increasing requirements for the less harmful exhaust emissions and the better fuel economy, the conventional injectors in gasoline engines can be replaced by the air shrouded injector in order to provide improved combustion in engine operations. To find out the optimal shape of air shrouded atomizer attached to the conventional injector nozzle, the critical design parameters such as droplet size, fuel and air inlet angles, and injection angles were investigated based on experimental analyses. To explain the characteristics of fuel atomization, these experimental approaches were carried out using a Phase Doppler Particle Analyzer (PDPA) system. The droplet sizes of injected air fuel mixture were obtained by using the beam diffraction phenomenon. In order to improve the atomization effect, the various atomizers were investigated. The Saute. Mean Diameter (SMD) measured at the predetermined locations outside the atomizer represented the performance of fuel atomization. The experimental results show that the design factors and atomization mechanism needed for developing air shrouded injectors. The suggested design parameters in this paper can be a useful reference in the early design stage.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.61-67
• /
• 2002

The present work is investigated optimal design for the injection molding process of a hand brake cover. The viscoelastic flow through a hand brake cover shape in the mold were calculated and compared with the experimental data. Numerical analysis reasonably predicted the general performance i.e hold pressure, cooling time and hold pressure time. In order to determine optimal process parameters, Numerical analysis and experiments have been performed for various process conditions. In this study, we obtained to increase in the productivity by $160\%$ by optimal process conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.3 no.2
• /
• pp.93-103
• /
• 1997

This paper develops a new heuristic, the Excursion Algorithm(EA), for constructing optimal designs for the experiments related with marine environment. The proposed EA consists of three parts: 1) construction of an initial feasible solution, 2) excursions over a bounded region, and 3) stopping rules. It is the second part that distinguishes the EA from the other existing heuristic methods. It turns out that excursions over a bounded feasible and/or infeasible region is effective in alleviating the risks of being trapped at a local optimum. Since this problem is formulated for the first time thesis, other heuristic algorithms do not exist. Therefore, global optimal solutions are obtained by complete enumeration for some cases, and the performance of the EA is evaluated in terms of solution quality. Computational results show that the proposed EA is effective in finding good(or, in many cases, global) solutions to the constrained optimal experimental design problems.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1289-1302
• /
• 2019

In this paper, an optimal allocation method of a hybrid active power filter in an active distribution network is designed based on the differential evolution algorithm to resolve the harmonic generation problem when a distributed generation system is connected to the grid. A distributed generation system model in the calculation of power flow is established. An improved back/forward sweep algorithm and a decoupling algorithm are proposed for fundamental power flow and harmonic power flow. On this basis, a multi-objective optimization allocation model of the location and capacity of a hybrid filter in an active distribution network is built, and an optimal allocation scheme of the hybrid active power filter based on the differential evolution algorithm is proposed. To verify the effect of the harmonic suppression of the designed scheme, simulation analysis in an IEEE-33 nodes model and an experimental analysis on a test platform of a microgrid are adopted.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.321-327
• /
• 2017

In this study, to investigate the shape of the back bead as a weld quality parameter and to select the optimal condition of the root-pass TIG welding of a horizontal butt-joint, an experimental design and the response surface method (RSM) have been employed. Three parameters are used as input variables, which include the base current, peak current, and welding speed. The back bead width is selected as an output variable representing the weld quality, the target value of the width is 5.4 mm. Conducting the experiments according to the Box-Behnken experimental design, a $2^{nd}$ regression model for the back bead width was made, and the validation of the model was confirmed by using the F-test. The desirability function was designed through the nominal-the-best formula for the appropriate back bead width. Finally, the following optimal condition for welding was selected using the RSM: base current of 0.9204, peak current of 0.8676, and welding speed of 0.3776 in coded values. For verification, a test welding process under the optimal condition was executed and the result showed the back bead width of 5.38 mm that matched the target value well.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.421-421
• /
• 2003

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.205-209
• /
• 2001

A study to analyze and solve problems of multi wire installation duct experiment has presented in this paper We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.173-177
• /
• 2002

A study to analyze and solve problems of multi wire installation duct experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.2
• /
• pp.88-99
• /
• 1992

This paper presents an efficient method of mapping Boolean equations to a set of library gates. The proposed system performs technology mapping by graph covering. To select optimal area cover, a new cost function and local area optimization are proposed. Experimental results show that the proposed algorithm produces effective mapping using given library.