• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1590-1599
• /
• 2016

The installation of distributed generation (DG) in the electrical networks has numerous advantages. However, connecting and disconnecting of DGs (CADD) leads to some problems in coordination of protection devices due to the changes in the short circuit levels in the different points of network. In this paper, an adaptive method is proposed based on available setting groups (SG) of relays. Since the number of available SG is less than possible CADD states, a classifying index (CI) is defined to categorize the several states in restricted setting groups. Genetic algorithm (GA) with a suitable objective function (OF) is used as an optimization method for the classification. After grouping, a modified coordination method is applied to achieve optimal coordination for each group. The efficiency of the proposed technique is demonstrated by simulation results.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.2E
• /
• pp.57-63
• /
• 2008

Stethoscopic auscultation is still one of the primary tools for the diagnosis of heart diseases due to its easy accessibility and relatively low cost. It is, however, a difficult skill to acquire. Many research efforts have been done on the automatic classification of heart sound signals to support clinicians in heart sound diagnosis. Recently, hidden Markov models (HMMs) have been used quite successfully in the automatic classification of the heart sound signal. However, in the classification using HMMs, there are so many heart sound signal types that it is not reasonable to assign a new class to each of them. In this paper, rather than constructing an HMM for each signal type, we propose to build an HMM for a set of acoustically-similar signal types. To define the classes, we use the KL (Kullback-Leibler) distance between different signal types to determine if they should belong to the same class. From the classification experiments on the heart sound data consisting of 25 different types of signals, the proposed method proved to be quite efficient in determining the optimal set of classes. Also we found that the class determination approach produced better results than the heuristic class assignment method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.257-271
• /
• 2016

The Structural SIMilarity (SSIM) index is one of the most widely-used methods for perceptual image quality assessment (IQA). It is based on the principle that the human visual system (HVS) is sensitive to the overall structure of an image. However, it has been reported that indices predicted by SSIM tend to be biased depending on the type of distortion, which increases the deviation from the main regression curve. Consequently, SSIM can result in serious performance degradation. In this study, we investigate the aforementioned phenomenon from a new perspective and review a constant that plays a big role within the SSIM metric but has been overlooked thus far. Through an experimental study on the influence of this constant in evaluating images with SSIM, we are able to propose a new solution that resolves this issue. In the proposed IQA method, we first design a system to classify different types of distortion, and then match an optimal constant to each type. In addition, we supplement the proposed method by adding color perception-based structural information. For a comprehensive assessment, we compare the proposed method with 15 existing IQA methods. The experimental results show that the proposed method is more consistent with the HVS than the other methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.84-89
• /
• 2014

Data-driven method for fault diagnostics system often use machine learning technique. To use such technique proper signal processing should be implemented such as time synchronous averaging (TSA) for ball bearing systems. However, for journal bearing diagnostics systems not much has been researched, and yet a proper signal processing method has not been studied. Therefore, in this research an optimal datum unit for a reliable journal bearing diagnostics system along with angular resampling process is being suggested. Before extracting time and frequency domain features, angular resampling is applied to each cycle of vibration data. As to preserve the characteristics of vibration signal, averaging method is replaced by finding the optimal datum unit which strengthens statistical characteristics of vibration signal. Then 20 features were extracted for various cases, and those features are being evaluated by two criteria, separability and classification accuracy.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.347-353
• /
• 1986

Fisher's discriminant method has been applied to the problem of the classification of Korean potsherds, using their elemental composition as analyzed by neutron activation analysis. A combination of analytical data by means of statistical linear discriminant analysis has resulted in removal of redundant variables, optimal linear combination of meaningful variables and formulation of classification rules.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.239-246
• /
• 2023

In this paper, we propose an open-loop algorithm to classify speech and music signals using the spectral flux parameters and Mel Frequency Cepstral Coefficients(MFCC) parameters for the audio coder. To increase responsiveness, the MFCC was used as a short-term feature parameter and spectral fluxes were used as a long-term feature parameters to improve accuracy. The overall voice/music signal classification decision is made by combining the short-term classification method and the long-term classification method. The Gaussian Mixed Model (GMM) was used for pattern recognition and the optimal GMM parameters were extracted using the Expectation Maximization (EM) algorithm. The proposed long-term and short-term combined speech/music signal classification method showed an average classification error rate of 1.5% on various audio sound sources, and improved the classification error rate by 0.9% compared to the short-term single classification method and 0.6% compared to the long-term single classification method. The proposed speech/music signal classification method was able to improve the classification error rate performance by 9.1% in percussion music signals with attacks and 5.8% in voice signals compared to the Unified Speech Audio Coding (USAC) audio classification method.

• Communications for Statistical Applications and Methods
• /
• v.10 no.2
• /
• pp.595-601
• /
• 2003

In this paper we propose an on line training method for classification based on least squares support vector machine. Proposed method enables the computation cost to be reduced and the training to be peformed incrementally, With the incremental formulation of an inverse matrix in optimization problem, current information and new input data can be used for building the new inverse matrix for the estimation of the optimal bias and Lagrange multipliers, so the large scale matrix inversion operation can be avoided. Numerical examples are included which indicate the performance of proposed algorithm.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.4
• /
• pp.965-974
• /
• 2003

In this paper we propose an incremental classification of multi-class data set by LS-SVM. By encoding the output variable in the training data set appropriately, we obtain a new specific output vectors for the training data sets. Then, online LS-SVM is applied on each newly encoded output vectors. Proposed method will enable the computation cost to be reduced and the training to be performed incrementally. With the incremental formulation of an inverse matrix, the current information and new input data are used for building another new inverse matrix for the estimation of the optimal bias and lagrange multipliers. Computational difficulties of large scale matrix inversion can be avoided. Performance of proposed method are shown via numerical studies and compared with artificial neural network.

• Smart Media Journal
• /
• v.2 no.2
• /
• pp.33-38
• /
• 2013

In this paper, we investigated baseline estimation methods for remove background noise using Raman spectra from acute alcohol liver injury and acute ethanol-induced chronic liver fibrosis. Far the baseline estimation, we applied first derivative, linear programming and rolling ball method. Optimal input parameter of each method were determined by the training rate of MAP (maximum a posteriori probability) classifier. According to the experimental results, classification results baseline estimation with the rolling ball algorithm gave about 89.4%, which is very promising results for classification of acute alcohol liver injury and acute ethanol-induced chronic liver fibrosis. From these results, to determined the appropriate methods and parameters of baseline estimation impact on classification performance was confirmed.

• Journal of Forest and Environmental Science
• /
• v.35 no.3
• /
• pp.181-188
• /
• 2019

This study was performed to construct tree species classification map according to three information types (spectral information, texture information, and spectral and texture information) by altitude (30 m, 60 m, 90 m) using the unmanned aerial vehicle images and the object-based classification method, and to evaluate the concordance rate through field survey data. The object-based, optimal weighted values by altitude were 176 for 30 m images, 111 for 60 m images, and 108 for 90 m images in the case of Scale while 0.4/0.6, 0.5/0.5, in the case of the shape/color and compactness/smoothness respectively regardless of the altitude. The overall accuracy according to the type of information by altitude, the information on spectral and texture information was about 88% in the case of 30 m and the spectral information was about 98% and about 86% in the case of 60 m and 90 m respectively showing the highest rates. The concordance rate with the field survey data per tree species was the highest with about 92% in the case of Pinus densiflora at 30 m, about 100% in the case of Prunus sargentii Rehder tree at 60 m, and about 89% in the case of Robinia pseudoacacia L. at 90 m.