• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.3
• /
• pp.149-155
• /
• 2006

This paper presents a torsional micromirror detached from PZT actuators (TMD), whose rotational motion is achieved by push bars in the PZT actuators detached from the micromirror. The push bar mechanism is intended to reduce the bending, tensile and torsional constraints generated by the conventional bending bar mechanism, where the torsional micromirror is attached to the PZT actuators (TMA). We have designed, fabricated and tested prototypes of TMDs for single-axis and dual-axis rotation, respectively. The single-axis TMD generates the static rotational angle of $6.1^{\circ}$ at 16 VDC, which is 6 times larger than that of single-axis TMA, $0.9^{\circ}$. However, the rotational response curve of TMD shows hysteresis due to the static friction between the cover and the push bar in the PZT actuator. We have shown that 63.2% of the hysteresis is due to the static friction caused by the initial contact force of the PZT actuaor. Without the initial contact force, the rotational response curve of TMD shows linear voltage-angle characteristics. The dual-axis TMD generates the static rotational angles of $5.5^{\circ}$ and $4.7^{\circ}$ in x-axis and y-axis, respectively at 16 VDC. The measured resonant frequencies of dual-axis TMD are $2.1\pm0.1$ kHz in x-axis and $1.7\pm0.1$ kHz in y-axis. The dual-axis TMD shows stable operation without severe wear for 21.6 million cycles driven by 16 Vp-p sinusoidal wave signal at room temperature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.912-921
• /
• 2005

Optical burst switching(OBS) is a promising solution for building terabit optical routers and realizing If over WDM. Channel scheduling Algorithm for reduce contention is one of the major challenges in OBS. We address the issue of how to provide basic burst channel scheduling in optical burst switched WDM networks with fiber delay lines(FDLs). In OBS networks the control and payload components or a burst are sent separately with a time gap. If CHP arrives to burst switch node, because using scheduling algorithm for data burst, reservation resources such as wavelength and transmit data burst without O/E/O conversion, because contention and void between burst are happened at channel scheduling process for data burst that happened the link utilization and bust drop probability Existent proposed methods are become much research to solve these problems. Propose channel scheduling algorithm that use Release Time of bust to emphasize clearance between data and data dissipation that is happened in data assignment in this treatise and maximize bust drop probability and the resources use rate (RTUC : Release Time Unscheduled Channel). As simulation results, Confirmed that is more superior in terms of data drop and link utilization than scheduling algorithm that is proposed existing. As simulation results, confirmed improved performance than scheduling algorithm that is proposed existing in terms of survival of burst, efficiency resource and delay. However, In case load were less, degradation confirmed than existent scheduling algorithm relatively, and confirmed that is superior in data drop aspect in case of load increased.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.203-206
• /
• 2017

We report a passive Q-switching of an all-fiber erbium-doped fiber laser delivering high pulse energy by using a high quality single-walled carbon nanotube saturable absorber (SWCNT-SA). A side-polished fiber coated with the SWCNT is employed as an in-line SA for evanescent wave interaction between the incident light and the SWCNT. This lateral interaction scheme enables a stable Q-switched fiber laser that generates high pulse energy. The central wavelength of the Q-switched pulse laser was measured as 1560 nm. A repetition rate frequency of the Q-switched laser is controlled from 78 kHz to 190 kHz by adjusting the applied pump power from 124 mW to 790 mW. The variation of pulse energy from 51 nJ to 270 nJ is also observed as increasing the pump power. The pulse energy of 270 nJ achieved at maximum pump power is 3 times larger than those reported in Q-switched all-fiber lasers using a SWCNT-SA. The tunable behaviors in pulse duration, pulse repetition rate, and pulse energy as a function of pump power are reported, and are well matched with theoretical expectation.

• International journal of advanced smart convergence
• /
• v.1 no.1
• /
• pp.19-26
• /
• 2012

The deployment of mobile femtocellular networks can enhance the service quality for the users inside the vehicles. The deployment of mobile femtocells generates a lot of handover calls. Also, numbers of group handover scenarios are found in mobile femtocellular network deployment. The ability to seamlessly switch between the femtocells and the macrocell networks is a key concern for femtocell network deployment. However, until now there is no effective and complete handover scheme for the mobile femtocell network deployment. Also handover between the backhaul networks is a major concern for the mobile femtocellular network deployment. In this paper, we propose handover control between the access networks for the individual handover cases. Call flows for the handover between the backhaul networks of the macrocell-to-macrocell case are proposed in this paper. We also propose the link switching for the FSO based backhaul networks. The proposed resource allocation scheme ensures the negligible handover call dropping probability as well as higher bandwidth utilization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1512-1517
• /
• 2012

In this paper, we proposed the novel hybrid guest-host liquid crystal display using the negative charged black particles in order to improve the low contrast ratio. We designed patterned electrode in order to switch the charged particle to the opposite electrode and improved the electro-optical characteristics by optimize the mixture of guest materials. In Comparison with the Heilmeier Guest-Host mode, proposed hybrid guest-host structure showed 80% reduction of transmittance in dark state, and the performance was examined by comparing contrast ratio.

• Electrical & Electronic Materials
• /
• v.4 no.3
• /
• pp.249-258
• /
• 1991

He-Ne레이저(.lambda.=0.6328[.mu.m])를 광원으로 사용하는 y-cut LiNbO$_{3}$기판의 광 도파로 형성 과정을 빔 전송방식 메카니즘을 이용하여 광 도파로에서 광파의 전계 변화 및 전계 분포에 대하여 시뮬레이션 하였다. 그리고 Xl(55[.mu.m])* Zl(5000[.mu.m])인 LiNbO$_{3}$기판의 광 도파로 폭을 4[.mu.m], 버퍼층을 0.02[.mu.m]로 하였을때 도파로 층의 깊이가 0.2[.mu.m]인 지점에서 인가전압에 대한 x방향의 전계(E$_{x}$)와 y방향의 전계(E$_{y}$ )분포를 관찰하였다. 또한 단일 도파로의 파라미터 조건을 적용하여 X-스위치를 구성하였을때 전계를 인가하지 않은 상태에서 굴절율 변화(dn) 0.002, 도파로 폭(w) 3[.mu.m]로 하여 도파로의 교차각(.alpha.)을 0.4.deg.~0.6.deg.로 변화시킨 경우, .alpha.=0.5.deg.와 0.6.deg.일 때는 광빔이 bar측으로 출력되었고 .alpha.=0.4에서는 광빔이 cross측으로 출력 됨을 확인하였다. 따라서 위에서 확인된 도파로의 교차각 .alpha.=0.4.deg.인 경우, 전극간격(gap)이 2[.mu.m]인 조건에서 스위칭 전압을 인가하였을 때 25[V]에서 전기광학 효과에 의하여 광빔이 cross측에서 bar측으로 변조됨을 확인함으로써 X-스위치 광변조기의 기본적인 설계조건을 구현하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.41-46
• /
• 2007

This article deals with the design and prototyping of Shift-By-Wire system for an automatic transmission equipped vehicle. In order to manipulate the shifting action electronically, Shift-By-Wire system consists of an electronic shift lever, an electric shift actuator and position sensors. The shift lever is designed to transform the driver's shifting command into an electric signal; it includes the position sensor using non-contact type hall sensor and an additional shifting switch acting as Tip-tronic. For the design of an electric shifting actuator, we investigated the stroke angles and shifting efforts of the manual control lever in each shifting section. And the position sensor of the shifting actuator is designed by using a potentiometer with an optical encoder. Finally the prototype of Shift-By-Wire system was built in a conventional 2.4L class SUV vehicle, and we performed road tests in order to verify its performance.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.489-492
• /
• 2006

We demonstrate a beat frequency-Switchable dual-mode external cavity laser hybrid integrated on planar lightwave circuit with an FP-LD and a sampled grating as external reflector. The dual-mode external avity laser was able to switch its beat frequency from 132GHz to 406GHz by changing LD current from 50mA to 55mA.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.195-198
• /
• 2002

현재의 광통신, 이동통신 및 디지털 시대에서는 보다 소형화되고, 대용량의 데이터 저장 및 다기능 소자에 대한 요구가 많아지고 있다. 이러한 전자 산업 환경에서 MEMS 소자는 여러 요구조건을 만족시킬 수 있는 특징을 갖추고 있으며 실제 소자의 제작에 있어서 MEMS 소자를 이용하여 여러 물리 및 화학 센서 및 Actuator 제작에 응용이 되어지고 있고 Optical switch, Gyroscope, 적외선 어레이 센서, 가속도 센서, 위치 센서 등 여러 분야에서 실용화가 진행되어지고 있다. MEMS 구조물의 packaging 방법에 있어서는 내부 MEMS 소자의 동작을 위한 외부 환경으로부터의 보호를 위하여 Hermetic sealing에 대한 요구를 만족시켜야 한다. 본 발표에서는 이와 같은 MEMS device의 진공 패키지를 구현함에 있어서 기판 내부에 수동소자를 실장할 수 있는 LTCC 기술을 이용하여 진공 패키징하는 방법에 대하여 소개한다. 본 기술을 이용하는 경우 기존의 Hermetic sealing 이외에 향후 적층 기판 내부에 수동소자를 내장시켜 배선 길이 및 노이즈 성분을 감소시켜 더욱 전기적 성능을 향상시킬 수 있는 장점이 있게된다. 본 논문에서는 LTCC 기판을 이용하여 패키징 시킨 후, 내부 진공도에 영향을 줄 수 있는 계면들에서의 시간에 따른 진공도 변화의 특성치를 측정하여 LTCC 기판의 Hermetic sealing 특성에 관하여 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3658-3662
• /
• 2010

A new bis-Ru(II) complex, in which two [Ru(1,10-phenanthroline)$_2$dipyrido[3,2-a:2',3'-c]phenazine]$^{2+}$ were tethered by a 1,3-bis(4-pyridyl)propane linker, was synthesized and its binding mode and stoichiometry to DNA was investigated by optical spectroscopy including linear dichroism (LD) and fluorescence intensity measurement. The magnitude of the negatively reduced LD signal of the bis-Ru(II) complex in the dipyrido[3,2-a:2',3'-c]phenazine (DPPZ) ligand absorption region appeared to be similar compared to that in the DNA absorption region, which is considered to be a diagnostic for DPPZ ligand intercalation. The binding stoichiometry measured from its LD magnitude and enhanced fluorescence intensity corresponds to one ligand per three DNA bases, effectively violating the nearest neighbouring site exclusion model for classical DNA intercalation. This observation is in contrast with monomer analogue [Ru(1,10-phenanthroline)$_2$dipyrido[3,2-a:2',3'-c]phenazine]$^{2+}$, which is saturated at the DPPZ ligand to DNA base ratio of 0.25, or one DPPZ ligand per four nucleobases.