• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.404-408
• /
• 1998

Yellow sand event has been studied using SeaWiFS data in order to examine the aerosol optical characteristics in the Yellow Sea and their influences on the atmospheric correction for the ocean color remote sensing. Two SeaWiFS images of April 18 and April 25, 1998, representing Yellow Sand event and clear-sky case respectively, are selected for emphasizing the impact of high aerosol concentration on the ocean color remote sensing. It was shown that NASA's standard atmospheric correction algorithm treats yellow sand area as either too high radiance or cloud area, in which ocean color information is not generated. SeaWiFS aerosol optical thickness is compared with nearby ground-based sun photometer measurements and also is compared with radiative transfer simulation in conjunction with yellow sand model, examining the performance of NASA's atmospheric correction algorithm in case of the heavy dust event.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.279-280
• /
• 2006

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.368-368
• /
• 2008

Oil spills are a principal factor of the ocean pollution. The complicated problems involved in detecting oil spills are usually due to varying wind and sea surface condition such as ocean wave and current. The Hebei Spirit accident was happened in the west sea ($36^{\circ}$41'04" N, $126^{\circ}$03'12" E) near about 8 km distant from Tae-An, Korea on December 7, 2007. The aim of this work is to improve the detection and classification performance in order to define a more accurate training set and identifying the feature of oil spill region. This paper deals with an optimization technique for the detection and classification scheme using multi-frequency and multi-polarization SAR and optical image data sets of the oil spilled sea. The used image data are the ENVISAT ASAR WS and Radarsat-1 of C-band and ALOS PALSAR of L-band SAR data and KOMPSAT-2 optical images together with meteorological or oceanographic data. Both the theory and the experimental results obtained are discussed.

• 대한원격탐사학회지
• /
• 제19권5호
• /
• pp.351-361
• /
• 2003

As the launches of a series of remote sensing satellites, there are various multiresolution and multi-spectral images available nowadays. This diversity in remotely sensed image data has created a need to be able to integrate data from different sources. The C-band imaging radar of ERS-2 due to its high sensitivity to coastal wetlands holds tremendous potential in mapping and monitoring coastal wetland features. This paper investigates the advantages of using ERS-2 SAR data combined with IRS-ID LISS-3 data for mapping complex coastal wetland features of Tamil Nadu, southern India. We present a methodology in this paper that highlights the mapping potential of different combinations of filtering and integration techniques. The methodology adopted here consists of three major steps as following: (i) speckle noise reduction by comparative performance of different filtering algorithms, (ii) geometric rectification and coregistration, and (iii) application of different integration techniques. The results obtained from the analysis of optical and microwave image data have proved their potential use in improving interpretability of different coastal wetland features of southern India. Based visual and statistical analyzes, this study suggests that brovey transform will perform well in terms of preserving spatial and spectral content of the original image data. It was also realized that speckle filtering is very important before fusing optical and microwave data for mapping coastal mangrove wetland ecosystem.

• Advances in aircraft and spacecraft science
• /
• 제10권1호
• /
• pp.67-82
• /
• 2023

Linear array imaging sensors are widely used in remote sensing satellites. The final products of an imaging sensor can only be used when they are geometrically, radiometrically, and spectrally calibrated. Therefore, at the first stages of sensor design, a detailed calibration procedure must be carefully planned based on the accuracy requirements. In this paper, focusing on inherent optical distortion, a step-by-step procedure for laboratory geometric calibration of a typical push-broom satellite imaging sensor is simulated. The basis of this work is the simulation of a laboratory procedure in which a linear imager mounted on a rotary table captures images of a pin-hole pattern at different angles. By these images and their corresponding pinhole approximation, the correction function is extracted and applied to the raw images to give the corrected ones. The simulation results illustrate that using this approach, the nonlinear effects of distortion can be minimized and therefore the accuracy of the geometric position of this method on the image screen can be improved to better than the order of sub-pixel. On the other hand, the analyses can be used to proper laboratory facility selection based on the imaging sensor specifications and the accuracy.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.591-598
• /
• 2002

Leakage magnetic flux is occurred in the cracked area of magnetized specimens, and also it changes the magnetic domain area of the magneto-optical film positioned on the specimen. It causes the change of the optical permeability of the magnetic domain on the crack area. So crack images can be obtained easily using this principle. On the other hand, utilizing a laser in this method makes possible to perform a remote sensing by detecting the light intensity contrast between cracked area and normal area. This paper shows the application of non-destructive inspection system taking advantage of magneto-optical method for micro-cracks and presents examples applied to the several types of specimens having fatigue cracks and fabricated cracks using this method. Also the authors prove the possibility of this method as a remote sensing system under the oscillation load considering application to real fields.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.459-462
• /
• 2006

The diffuse attenuation coefficient for down-welling irradiance ($K_d$) is an important parameter for ocean studies including remote sensing applications. For the vast ocean, ocean color remote sensing is the only possible means to get the fine-scale measurements of $K_d$. To develop a technique of estimating $K_d$ from remotely sensed data, the following underwater optical parameters (absorption coefficient (a), attenuation coefficient (c), scattering coefficient (b), diffuse attenuation coefficient ($K_d$), etc.) have been studied. For this research we conducted the field campaign around the Yellow Sea at $8{\sim}9$ June, 2006. We obtained a set of underwater optical parameter data: down-welling irradiance ($E_d$), up-welling irradiance ($E_u$) and up-welling radiance ($L_u$) using TriOS optical sensors and a, c coefficient using Spectral Absorption and Attenuation Meter (AC-S). We then derived $K_d$ values from $E_d$ for each depth.

• 센서학회지
• /
• 제6권3호
• /
• pp.172-179
• /
• 1997

간섭형 광섬유 센서의 경우 소자의 구성만 적절히 바꾸어 다른 종류의 측정에도 사용될 수 있다는 점에 착안하여 여러 종류의 센서를 동시에 신호처리할 수 있는 원격 다중화 광섬유 센서 시스템을 구현하였다. 구현된 센서 시스템의 신호처리는 간단한 광학 구성으로 원격 다중화 측정이 가능하도록 광섬유 Fabry-Perot 간섭형 센서배열을 가정하여 피측정량의 변화에 의한 간섭 무늬의 수만 카운트하는 디지털 신호처리로 구성되었다. 광섬유의 광학 효과에 대한 데이터를 종합함으로써 센서 시스템에 부착할 센서를 구현하기 위해 적합한 광학효과를 선택하는 기준을 제시하였으며, 한 예로서 반경 4.3 cm의 원형 다이아프램 중앙에 광섬유 Fabry-Perot 간섭계를 부착하여 광섬유의 스트레인 광학 효과를 이용하게 구성한 압력센서 1개를 센서 시스템에 연결하여 간섭형 광섬유 압력 센서 시스템을 구성하였다. 압력센서의 동작을 수조실험에서 확인함으로써 압력의 원격 측정이 가능함을 보였으며, 수조 실험의 길과 2 m의 측정범위에서 오차는 ${\pm}3.6\;cm$이내인 것으로 나타났다.

• 대한원격탐사학회지
• /
• 제20권4호
• /
• pp.275-288
• /
• 2004

이 논문은 다중 센서 원격탐사 화상의 분류를 위해 퍼지 논리 융합과 결합된 relaxation labeling 방법을 제안하였다. 다중 센서 원격탐사 화상의 융합에는 퍼지 논리를, 분광정보와 공간정보의 융합에는 반복적인 relaxation labeling 방법을 적용하였다. 특히 반복적 relaxation labeling 방법은 공간정보의 이용에 따른 분류 화소의 변화양상을 얻을 수 있는 장점이 있다. 토지 피복의 감독 분류를 목적으로 광학 화상과 다중 주파수/편광 SAR 화상에 제안 기법을 적용한 결과, 다중 센서 자료를 이용하고 공간정보를 함께 결합하였을 때 향상된 분류 정확도를 얻을 수 있었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 제16회 정기총회 및 동계학술발표회
• /
• pp.348-349
• /
• 2005