• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.373-374
• /
• 2006

This paper physically demonstrates that our proposed method improves the Signal-to-Noise Ratio (SNR) of significantly increase the number of acceptable optical signals in PON(Passive Optical Network) systems. This method reduced Optical Beat Interference(OBI) by using CDMA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.209-212
• /
• 2012

In this paper, we have studied on the optimal design of the optical compensation film for the TN-LCDs. To have wide viewing angle panels, several methods such as multi-domain method, optical path method, and phase compensation method have been proposed. Among these methods, this paper focused on the phase compensation method. In the phase compensation method, the phase retardation generated from the optical birefringence for the off-axis incident is compensated by using optical films with refractive anisotropy. To compensate the phase retardation of the TN-LCDs, we have proposed design concept for the biaxial optical films and analyzed the optical performance for the proposed structures. The calculation of the dynamic motion of the liquid crystals was based on the Ericksen-Leslie theory and the optical performance of the TN-LCD was calculated from the Extended Jones Matrix Method. From the results, we have confirmed that the optical characteristics of the TN-LCDs with the biaxial films have been improved considerably compared with the TN-LCDs compensated by the combination of the uniaxial films.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.174-179
• /
• 2016

In this paper, a novel full-aperture reflective null measuring method is proposed to detect the transmission wavefront of a conformal dome surface. An aspheric compensator is designed and placed behind the dome to reflect the aspheric testing wave back to the same path. To ensure the feasibility of this method, tolerance analysis is conducted, and guidance to assembly is given accordingly. The accuracy of this method is verified to be λ/30 (λ =3.39 μm) by Monte Carlo algorithm. In addition, the influence of different error factors, including the thickness error and decenter error of the dome, on the testing wavefront is analyzed. Simulation and experiment indicate that this method is practical and simple, and can measure the conformal domes precisely and comprehensively.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.354-364
• /
• 2012

In this paper, a new 2-step quadrature phase-shifting digital holographic optical encryption method using orthogonal polarization is proposed and tolerance errors for this method are analyzed. Unlike the conventional technique using a PZT mirror, the proposed optical setup comprises two input and output polarizers, and one ${\lambda}$/4-plate retarder. This method makes it easier to get a phase shift of ${\pi}$/2 without using a mechanically driven PZT device for phase-shifting and it simplifies the 2-step phase-shifting Mach-Zehnder interferometer setup for optical encryption. The decryption performance and tolerance error analysis for the proposed method are presented. Computer experiments show that the proposed method is an alternate candidate for 2-step quadrature phase-shifting digital holographic optical encryption applications.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.38-43
• /
• 2013

In this study, we propose a simple and indirect method to determine the optical constants of Mo and ITO thin films in the extreme ultraviolet (EUV) wavelength region by using X-ray reflectometry (XRR) and Rutherford backscattering spectrometry (RBS). Mo and ITO films were deposited on silicon substrates by using an RF magnetron sputtering method. The density and the composition of the deposited films were evaluated from the XRR and RBS analysis, respectively and then the optical constants of the Mo and ITO films were determined by an indirect optical method. The results suggest that the indirect method by using the XRR and RBS analysis will be useful to search for suitable high absorbing EUVL mask material quickly.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.105-106
• /
• 2006

It is important to identify the exact target optical cable that a worker look for when he executes a cable construction work. Until now, An Optical cable identification work has been done by a manual pulling of an optical cable or by the method of using RF signals. But these methods not only consume much time and labor costs but also have a distance limit of the optical cable to identify. In this paper, we propose a method that uses the phase change signal of the optical interferometer to identify an optical cable. With the proposed method the field worker can have an efficient tool to prevent miscutting the optical cable and can also save operating costs.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.174-175
• /
• 2001

This paper theoretically demonstrates that our proposed method improves the Signal-to-Noise Ratio (SNR) of significantly increase the number of acceptable optical signals in FDMA(SCMA) systems. This method reduced Optical Beat Interference(OBI) by using CDMA.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.126-127
• /
• 2000

In this paper, we proposed an optical encryption method based in the concept of visual cryptography and interferometry. In our method a secret binary image was divided into two sub-images and they were encrypted by 'XOR' operation with a random key mask. Finally each encrypted image was changed into phase mask. By interference of these two phase masks the original image was obtained. Compared with general visual encryption method, this optical method had good signal-to-noise ratio due to no need to generate sub-pixels like visual encryption.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.477-484
• /
• 2014

In this paper, we propose a new optical secret key sharing method based on the Diffie-Hellman key exchange protocol required in cipher system. The proposed method is optically implemented by using a free-space interconnected optical logic gate technique in order to process XOR logic operations in parallel. Also, we present a compact type of optical module which can perform the modified Diffie-Hellman key exchange for a cryptographic system. Schematically, the proposed optical configuration has an advantage of producing an open public key and a shared secret key simultaneously. Another advantage is that our proposed key exchange system uses a similarity to double key encryption techniques to enhance security strength. This can provide a higher security cryptosystem than the conventional Diffie-Hellman key exchange protocol due to the complexity of the shared secret key. Results of numerical simulation are presented to verify the proposed method and show the effectiveness in the modified Diffie-Hellman key exchange system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.24-32
• /
• 2010

In this study, we have proposed a pre-processing algorithm newly developed for improving the tracking efficiency of the optical flow method. The developed pre-processing algorithm consists of a median filter, binarization, morphology, canny edge, contour detecting and an approximation method. In order to evaluate whether the optical flow tracking capacity increases, this study applied the pre-processing algorithm to the Lucas-Kanade(LK) optical flow algorithm, and comparatively analyzed its images and tracking results with those of optical flow without the pre-processing algorithm and with the existing pre-processing algorithm(composed of median filter and histogram equalization). As a result, it was observed that the tracking performance derived from the LK optical flow algorithm with the pre-processing algorithm, shows better tracking accuracy, compared to the one without the pre-processing algorithm and the one with the existing pre-processing algorithm. It seems to have resulted by successful segmentation for characteristic areas and subdivision into inner and outer contour lines.