• 천문학회보
• /
• 제45권1호
• /
• pp.42.3-42.3
• /
• 2020

We investigate the observational properties of Wolf-Rayet stars, suggest the constraint of their mass-loss rate and apply our results to the observed progenitor candidates of Type Ib/Ic supernovae (iPTF13bvn and SN 2017ein). For this purpose, we adopt the WR star models with various mass-loss rates and wind terminal velocities. We obtain the high resolution spectra of those models at the pre-supernova phase using the radiative transfer code CMFGEN. We verify the optically faint property of SN Ic progenitors and show that the optical faintness is mainly originated by the high effective temperature at the photosphere. We also show that a simple analytic model for WR winds using a constant opacity can roughly predict the photospheric parameters. We show that the change of the mass-loss rate and the terminal wind velocity critically affects the optical luminosity. We find the optical luminosities of SN Ic progenitor models with our fiducial mass-loss rate prescription are fainter than the detection limits. We also suggest the mass-loss rate of WR stars may not exceed 2 times of our fiducial value by comparing our predictions with the detection limit of SN Ib/Ic progenitors. The directly observed progenitor candidate of iPTF13bvn can be explained by our SN Ib progenitor models. We find that the SN 2017ein progenitor candidate is too bright and too blue to be a SN Ic progenitor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.644-647
• /
• 2004

Optical add/drop multiplexers (OADMs), one of the new network elements, will play a key role enabling greater connectivity and flexibility in the dense wavelength-division multiplexing (DWDM) networks. The importance of OADMs is that they allow the optical network to be local transmitting/extraction on a wavelength-by-wavelength basis to optimize traffic, efficient network utilization, network growth, and to enhance network flexibility. Also, the automatic assembly system of micro optical filters and fibers is a key technology in the development of optical modules with high functionality. Recently, one of remarkable tends in the development of optical communication industry is the miniaturization and integration of products. In this research, we have developed a system capable of automatic alignment of a film filter and a lensed fiber in order to improve the speed and losses in the optical fiber to filter alignment of optical modules. Using the developed automatic alignment system and silicon optical benches, we have fabricated the micro OADM and measured the insertion loss and aging effect.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.112-113
• /
• 1999

• ETRI Journal
• /
• 제31권1호
• /
• pp.31-41
• /
• 2009

Optical burst switching is a promising switching paradigm for the next IP-over-optical network backbones. However, its burst loss performance is greatly affected by burst contention. Several methods have been proposed to address this problem, some of them requiring the network to be flooded by frequent state dissemination signaling messages. In this work, we present a traffic engineering approach for path selection with the objective of minimizing contention using only topological information. The main idea is to balance the traffic across the network to reduce congestion without incurring link state dissemination protocol penalties. We propose and evaluate two path selection strategies that clearly outperform shortest path routing. The proposed path selection strategies can be used in combination with other contention resolution methods to achieve higher levels of performance and support the network reaching stability when it is pushed under stringent working conditions. Results show that the network connectivity is an important parameter to consider.

• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.109-116
• /
• 1998

In this work was produced and analyzed a z-cut Ti:LiNbO$_{3}$ optical waveguide which applies for various optical devices.A waveguide channel with a thickness 8 .mu.m and a length 66,000.mu.m and a mach-zehnder interferometer type waveguide were fabricated at a diffusion temperature 1050.deg. C for 6-8hours in a wet $O_{2}$ environment. The resulting Ti:LiNbO$_{3}$ optical waveguide was measured to have a Ti-strip thickness of 950.angs. and low loss. Surfaces and cross-sections of a fabricated waveguide were analysed. The mode pattern anaysis revealed that the waveguide showed a single mode at a 1550nm wavelength. The effective dimension of the waveguide was calculated by measuring a gaussian profile; Wx=10.95.mu. and Wy=9.14.mu.m. a propagation loss, of 0.50dB/cm for a TM mode and 0.45dB/cm for a TE mode, was low enough to be accepatable for optical devices.

• Journal of the Optical Society of Korea
• /
• 제11권1호
• /
• pp.1-5
• /
• 2007

We investigate the efficiency of an optical intensity modulator based on an electrically tunable $LiNbO_3$ reflection grating. Assuming a grating coupling coefficient and the waveguide propagation loss, waveguide length is varied to find its effect on the modulator slope efficiency and the device capacitance. With the low propagation loss of the $LiNbO_3$ waveguide, a very efficient optical intensity modulator can be achieved for a low frequency (${\sim}1GHz$) as long as the requirement for the grating coupling coefficient is satisfied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.21-23
• /
• 1994

By adding La₂O₃ to optical multicomponent glass composition, after making mother glass and core fiber that enable to enlarge the infrared transmittance region, then surveyed the optical properties. Through thermal analysis of the glass abstained by melt-quenching after selecting stable basic composition on devitrification and replace SiO₂ by 4-12wt% La₂O₃. As La₂O₃ increases up to l2wt% transition temperature, refractive index, density, deformation temperature increased, whereas thermal expansion coefficient decreased. As a result of inspectig transmittance in UV/VIS/IR region, visable region indicated the decrease of transmittance by increasing the La₂O₃ and transmittance region was enlarged by increasing the La₂O₃ in IR region. Also, fabricate core fiber at 820℃ and severy the optical loss we could fact that La₂O₃ composition added 12wt% showed the minimum optical loss.

• 센서학회지
• /
• 제24권1호
• /
• pp.1-5
• /
• 2015

The V-grooved single-mode fiber in which a surface part of the core was removed was investigated as a quasi-distributed water detection sensor. In the normal state, the V-grooved region is filled and covered with a specific RI (Refractive Index)-matched medium, and the sensor experiences minimal optical loss. As water invades the V-grooved region, the material is dissolved and removed, and a considerable optical loss occurs owing to the large RI difference between the fiber core and water. The experimental results showed the feasibility of the device as a sensor element of the quasi-distributed water detection sensor system based on general optical time domain reflectometry (OTDR).

• Macromolecular Research
• /
• 제8권4호
• /
• pp.165-171
• /
• 2000

Fluorinated polyimides with high thermal stability, low optical absorption loss in the optical communication wavelengths of 1.3 and 1.55㎛, and low birefringence and water absorption have been investigated for optical waveguide applications. These polyimides were prepared from 2,2-bis(3,4-dicar-boxyphenyl) hexafluoropropane dianhydride (6FDA) with 1,4-bis-(4-amino-2-trifluoromethyl-phenoxy) tetrafluorobenzene (ATPT) , 1,4-bis-(4-amino-2-trifluoromethyl-phenoxy) benzene (ATPB) , and 1,3-bis-(4-amino-2-trifluoromethyl-phenoxy ) 4,6-dichlorobenzene (ATPD ), respectively. The polyimides obtained had glass transition temperatures that ranged from 260 to 280$\^{C}$, and low water absorption less than 0.4% and low optical loss (> 0.2 dB/cm) at 1.3 and 1.55㎛. Birefringency values of polymer films ranged from 0.0041 to 0.0066.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.682-691
• /
• 1997

We have investigated the guided optical properties of a Ti:LiNbO$_3$optical waveguide which was fabricated by Ti-diffusion in an air atmosphere and proposed an effective polishing method of waveguide endfaces. And the results of guided optical mode and fabrication condition were obtained as follows; \circled1 propagation loss : 0.53 dB/cm \circled2 mode size : horizontal/vertical=12.5${\mu}{\textrm}{m}$ \circled3 mode mismatch : 1.7 dB \circled4 diffusion temperature : 105$0^{\circ}C$, time : 8 hours \circled5 atmosphere : air